JLG Service & Repair Forum

My JLG AU3019 1600258 controler is malfunctioning, and I need it repaired as soon as possible to resume work on the industrial unit.

—> Purchase or Repair: Ticket Image

— Posted by Stoll on 2015-07-24

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by SeekersISeek on 2013-08-17 01:01
The JLG 1600286 control for the aerial work platform has a failed drive or board. Need to diagnose and replace ASAP to get it back up and running.

—> Purchase or Repair:
#JLG by pasha on 2013-08-05 03:32
We have a critical issue with JLG 1600286 Controller affecting the production line. It's failing to provide necessary commands, halting our operations. Urgent repair is needed to avoid further downtime.

—> Purchase or Repair:
#JLG by Winery on 2013-06-21 18:58
Hello, I am reaching out on behalf of a client who is experiencing issues with a JLG part number 1600286, described as a controller. Can you please provide information on troubleshooting steps or repair options for this specific part? Thank you.

—> Purchase or Repair:
#JLG by TC CHOU on 2015-08-15 07:20
Hi there, Could you please provide repair information for a JLG E300AJP 1600292 Articulator? Our machine has stopped working and we need a replacement part urgently. Thank you.

—> Purchase or Repair:
#JLG by Hosawi on 2014-03-25 04:30
The JLG AU3019 1600289 is down due to a faulty Control Module. Needs to be checked and replaced as soon as possible. Thanks!

—> Purchase or Repair:
#JLG by Dierickx on 2013-06-12 21:59
JLG 1600286 control panel not responding, platform not moving.

—> Purchase or Repair:
#JLG by Strickland on 2014-05-05 20:20
Do you have a replacement JLG AU3019 1600258 Control Module available for sale or repair? Need it urgently to keep production running. Thank you.

—> Purchase or Repair:
#JLG by Al Aguiniga on 2015-07-19 20:20
We experienced downtime on the JLG 7013310 631/40038 DC Motor Controller unit earlier today. Can you provide some insight into what caused the issue and when it occurred? Your quick response would be greatly appreciated before the next shift begins. Thank you!

—> Purchase or Repair:
#JLG by AMIT on 2015-01-11 17:41
The JLG AU3019 1600286 is down due to a Smart System drive issue. Please have someone look into it first thing in the morning.

—> Purchase or Repair:
#JLG Smart System by carlos ramirez on 2008-03-21 19:53
I'm experiencing an issue with the JLG Smart System AU3019 1600258. It seems like the controller function has stopped working properly. I will need some assistance troubleshooting and fixing this problem.

—> Purchase or Repair:
#JLG by Alessandro Panichi on 2012-02-22 15:56
JLG AU3019 1600286 Controller not powering up, preventing machine operation.

—> Purchase or Repair:
#JLG by keaggy on 2012-12-27 23:33
Hello, could you please provide repair information for the JLG AU3019 Controller with serial number 1600286? It has stopped working, and we need a replacement. Thank you.

—> Purchase or Repair:
#JLG by He on 2015-08-08 20:20
The JLG AU1830 631/40038 is displaying the error code ABC123 repeatedly, and the equipment is not responding to any commands. Please advise on next steps for troubleshooting and resolving this issue

—> Purchase or Repair:
#JLG by SCIUTTO on 2014-04-05 08:29
Issue detected on JLG 1600258 controller - drive or board failure. Needs immediate attention to avoid downtime. Heading to next machine, will troubleshoot further on return.

—> Purchase or Repair:
#JLG by jiang on 2012-05-03 09:18
The JLG AU3019 1600286 controller is malfunctioning. It is not responding as expected and displaying unusual behavior.

—> Purchase or Repair:
#JLG by QUINONEZ on 2013-05-29 07:02
The JLG 7013310 631/40038 is showing error code E324. Equipment is not responding to controls. Please advise next steps for troubleshooting and repair.

—> Purchase or Repair:
#JLG by Heenan on 2012-04-26 10:48
The controller on my JLG AU3019 1600286 is malfunctioning, and I need it repaired

—> Purchase or Repair:
#JLG by Contador on 2015-10-14 15:15
Looking to repair my JLG MOS 60 D 631/40077 DC Motor Controller. It's not responding or functioning correctly. Need assistance from a qualified technician. Thank you.

—> Purchase or Repair:
#JLG by Brodar on 2013-07-22 10:32
The DC motor controller (JLG 7013310 631/40038) on the line is malfunctioning, leading to significant production delays. Urgent attention and repair are needed to get operations back on track immediately.

—> Purchase or Repair:
#JLG by David VanKirk on 2014-12-24 00:44
Hello, we have a client in need of information regarding the JLG part number 59110003 1600292, described as a Power Supply. Can you please provide details on availability, pricing, and estimated repair time? Thank you.

—> Purchase or Repair:
#JLG by Raul Martinez on 2008-09-16 19:42
Could the JLG AU3019 1600258 Smart System Controller be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Jonathan Albert Ocampo on 2012-12-01 08:22
Hello, please provide an update on the status of the JLG 1600346 PROA70481 power module. It is imperative that we receive a response

—> Purchase or Repair:
#JLG by John Casper on 2013-07-26 00:32
The maintenance team reported an issue with JLG 1600286, which is the control for the aerial work platform.

—> Purchase or Repair:
#JLG by DIESEL on 2015-07-10 07:21
The JLG E300AJP 1600292 is still down. Urgent response required.

—> Purchase or Repair:
#JLG by karsana on 2013-02-17 19:49
The JLG 1600286 control unit is not working.

—> Purchase or Repair:
#JLG by Luchyk on 2013-08-08 08:32
Hello, we have a JLG Smart System 1600258 controller for an aerial work platform that has stopped working. We need a replacement but cannot find one. Can you provide repair information for this? Thank you.

—> Purchase or Repair:
#JLG by Matthew on 2014-12-04 10:23
I need urgent assistance with my JLG AU3019 1600289. The Control Module needs attention, and the unit is still down. Please prioritize this issue and ensure someone gets back to me

—> Purchase or Repair:
#JLG by blannybuS on 2015-08-05 00:20
I'm reporting a downtime incident with the JLG AU3019 1600258 due to an issue with the controller. Can you provide a quick overview of what happened and when? It's crucial to address this before the next shift begins.

—> Purchase or Repair:
#JLG by Bhupendra on 2014-05-05 03:20
Can I repair or buy a replacement for the JLG 1600292 controller? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Tom philp on 2015-08-12 13:20
The JLG MOS 60 D 631/40077 DC Motor Controller is not working.

—> Purchase or Repair:
#JLG by Barren on 2012-06-14 00:48
Hello, we have a JLG Smart System AU3019 controller that needs repair. Could you please provide information on the services you offer for this specific part number? Thank you.

—> Purchase or Repair:
#JLG by David Strodel on 2012-04-30 09:08
The JLG Smart System AU3019 controller is malfunctioning, causing a halt in production. We need immediate assistance to resolve this issue and get the production line back up and running. Please prioritize this repair to minimize downtime.

—> Purchase or Repair:
#JLG by Garth on 2015-07-24 17:43
Hello, I'm reaching out regarding the JLG AU1830 631/40038 DC Motor Controller. We are looking for information on whether this unit is still supported or if replacement parts are available. Your assistance in identifying repair options or providing guidance on the availability of parts would be grea…Purchase or Repair: Ticket Image...
Show More
#JLG by LAYMAN on 2013-07-31 00:32
I'm having trouble with the JLG Smart System 1600258. Something seems to have stopped working, but I'm not sure what exactly. Any assistance would be greatly appreciated.

—> Purchase or Repair:
#JLG by Canavan on 2015-01-12 14:41
Do you have a JLG AU3019 1600286 Smart System drive available for either repair or purchase to keep our production running?

—> Purchase or Repair:
#JLG by danilo on 2015-01-06 09:41
Please advise if the JLG E300AJP 1600292 Articulator unit is still supported and if replacement parts are available for this older model. Thank you.

—> Purchase or Repair:
#JLG by JITENDRA on 2015-03-07 09:15
I was informed that the JLG MOS 60 D 631/40077 is a DC Motor Controller unit that is currently not working.

—> Purchase or Repair:
#JLG by Anhishek Agarwal on 2013-07-22 20:32
Need assistance with JLG Smart System 1600258 for an aerial work platform. The controller seems unresponsive, and we require urgent repairs. Please reach out if you can help.

—> Purchase or Repair:
#JLG by Jeff Slayton on 2015-09-18 19:36
JLG E300AJP 1600292 not extending fully when articulating.

—> Purchase or Repair:
#JLG by A. W. Smith Consulting on 2012-03-28 16:01
The unit that controls the equipment in our warehouse seems to be malfunctioning. It's not responding as usual and behaving erratically. Please help check and fix the issue with the JLG Smart System AU3019 controller. Thank you!

—> Purchase or Repair:
#JLG by Simon on 2008-06-07 18:22
Hi, the JLG AU3019 1600258 Smart System Controller is down. Please check and repair it during the day shift. Thanks!

—> Purchase or Repair:
#JLG by JOEL LEVIN on 2013-07-10 12:32
Hi there, we're currently in need of repair info for a JLG 1600286 controller. Could you please provide details on where we can find a replacement quickly? Thank you.

—> Purchase or Repair:
#JLG by Cheong on 2013-03-21 12:40
Experiencing issues with my JLG 1600286 control for aerial work platform, looking for repair service as it's not functioning properly and affecting productivity on-site. Need someone reliable to fix this unit

—> Purchase or Repair:
#JLG by Bela on 2012-04-13 08:38
Could you please confirm if the JLG Smart System AU3019 Controller is still supported and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by nathan newbern on 2012-07-27 17:19
The power module (JLG 1600346 PROA70481) is malfunctioning, causing a halt in production. We urgently need repairs to get the line moving again swiftly.

—> Purchase or Repair:
#JLG by Robert Bombard on 2014-04-04 12:29
I'm reporting that the JLG AU3019 1600258 control module malfunctioned, causing downtime at 845 AM today. Need a quick resolution before the next shift begins. Thank you.

—> Purchase or Repair:
#JLG by Shahminan on 2015-03-08 21:13
The DC Motor Controller on JLG AU1830 631/40038 is malfunctioning, causing delays in production. Urgent repair service is required to get the line moving again swiftly.

—> Purchase or Repair:
#JLG by Dave McDonald on 2013-08-11 23:32
Hello, I'm reaching out on behalf of my client regarding JLG part number 1600286, which is a controller. They are experiencing some issues with it and would like to get more information on potential solutions or repairs. Thank you for your assistance.

—> Purchase or Repair:
#JLG by yang on 2012-03-21 11:32
Hi, our JLG 1600346 PROA70481 is showing error code 1234 and not powering up despite repeated attempts. We suspect a power module issue. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:
#JLG by Michael Brentano on 2016-01-03 21:24
The JLG AU3019 1600258 is showing error code E456 and won't power up. It seems to be a Smart System Controller issue. Please advise on troubleshooting steps or repairs needed.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.