JLG Service & Repair Forum

Experiencing motor control issues with the JLG AU3019 1600289. Need assistance from a reliable technician for repairs.

—> Purchase or Repair: Ticket Image

— Posted by James on 2009-12-04

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Kathleen Kosman on 2014-12-22 17:06
Could you please confirm if the JLG 1600292 controller can be repaired or if it needs to be replaced? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by Jonathan Tomlinson on 2015-06-22 19:12
issue with JLG AU1830 631/40038 - DC Motor Controller just failed. Need to troubleshoot ASAP.

—> Purchase or Repair:
#JLG by Gregory Momyer on 2016-02-18 13:03
The JLG AU3019 1600289 Smart System Controller unit is malfunctioning. It is displaying unusual behavior and not operating as expected. Please provide more details about the specific issues you are observing.

—> Purchase or Repair:
#JLG by Tim Curran on 2013-05-10 22:45
The JLG Smart System 1600258 controller for an aerial work platform has malfunctioned and needs to be looked at immediately.

—> Purchase or Repair:
#JLG by GLENN SUYDAM on 2012-03-20 12:32
Machine displaying error code "E-Stop Activated" and not responding to any commands.

—> Purchase or Repair:
#JLG Smart System by Grant Neeley on 2008-02-11 20:31
Hello, I'm interested in purchasing a JLG Smart System AU3019 1600258 controller. I'm not entirely sure if this is the exact model I need, but my team suggested reaching out to inquire about pricing and availability. We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by AMERICA on 2014-11-01 11:57
Hi there, I'm interested in purchasing a JLG AU3019 1600258 Control Module. I wanted to check with you about the pricing and availability as I'm looking to source one quickly. Thank you!

—> Purchase or Repair:
#JLG by Al Aguiniga on 2015-07-19 20:20
We experienced downtime on the JLG 7013310 631/40038 DC Motor Controller unit earlier today. Can you provide some insight into what caused the issue and when it occurred? Your quick response would be greatly appreciated before the next shift begins. Thank you!

—> Purchase or Repair:
#JLG Smart System by carlos ramirez on 2008-03-21 19:53
I'm experiencing an issue with the JLG Smart System AU3019 1600258. It seems like the controller function has stopped working properly. I will need some assistance troubleshooting and fixing this problem.

—> Purchase or Repair:
#JLG by mortezazadeh on 2015-08-15 13:20
I believe the DC Motor Controller on your JLG AU1830 631/40038 may be malfunctioning, causing the machine to stop working properly. I recommend having a technician inspect and diagnose the issue to determine the best course of action for repairs. Let me know if you need further assistance. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by Chad Hulse on 2014-05-06 07:20
Hello, I am following up again regarding the JLG AU3019 1600289 Control Module issue. The unit is still down. Please provide an update at your earliest convenience. Thank you.

—> Purchase or Repair:
#JLG by bagheri on 2016-02-18 10:03
I've noticed that the JLG AU3019 1600289 is having an issue with its controller. It seems like something has stopped working properly. Would you be able to take a look at it and see what might be causing the problem?

—> Purchase or Repair:
#JLG by saliou ngom on 2014-12-23 04:44
The JLG 1600292 controller has failed on one of the machines drive or board issue. Need to address this ASAP to get the equipment back up and running.

—> Purchase or Repair:
#JLG by REYES on 2015-07-28 20:20
Please provide an update or estimate for the repair of JLG AU3019 1600258 - CONTROLLER. Thank you.

—> Purchase or Repair:
#JLG by SHANNON BRUCE on 2012-12-17 22:13
Hello, following up on the previous message regarding the JLG AU3019 1600286 Controller. The unit is still down. Please provide an update

—> Purchase or Repair:
#JLG by Christian Torres Chilan on 2013-07-24 10:32
Hello, I'm reaching out about JLG part number 1600286, described as a controller. My client is experiencing an issue with it and would like to get more information on troubleshooting or repair options. Can you please provide guidance on this particular part? Thank you.

—> Purchase or Repair:
#JLG by fabiio on 2015-08-27 22:30
Hello, I'm reaching out regarding a JLG AU1830 631/40038 DC Motor Controller that stopped working. We urgently need repair information. Can you please provide details on fixing or replacing this component? Thank you.

—> Purchase or Repair:
#JLG by Tsimivony Jean de la Croix on 2013-08-09 17:35
The JLG 1600286 control board malfunctioned during the shift. Please address the issue

—> Purchase or Repair:
#JLG by HowardMef on 2013-02-26 11:28
The DC motor controller (JLG 7013310 631/40038) just failed, probably due to a faulty drive or board. I'll troubleshoot further once I reach the machine.

—> Purchase or Repair:
#JLG by Kendall Bailey, Nnor on 2013-08-11 08:32
Can the JLG 1600286 control for the aerial work platform be repaired or replaced? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by rami izhaky on 2013-05-24 15:05
JLG 1600286 controller not responding.

—> Purchase or Repair:
#JLG by Joel Schambeau on 2014-12-18 15:44
JLG 1600292 controller malfunctioning, halting production line. Immediate repair needed to resume operations.

—> Purchase or Repair:
#JLG by Jeiner Jhampier Riofrio Zapata on 2015-07-22 21:43
Hi team, the JLG AU3019 1600286 is down due to a Smart System drive issue. Needs attention ASAP. Thanks!

—> Purchase or Repair:
#JLG by Bratsburg on 2014-07-01 20:57
Unit JLG 59110003 with serial number 1600292 is down due to power supply issue. Needs attention ASAP.

—> Purchase or Repair:
#JLG by ASHIS MANDAL on 2013-10-11 11:42
The JLG 1600286 control board is not working and needs attention.

—> Purchase or Repair:
#JLG by MEHRABAN on 2015-07-24 01:20
The JLG AU1830 631/40038, which is a DC Motor Controller, experienced a failure causing downtime. This issue occurred at leading to disruptions in operations. Please provide a quick overview of what happened before the next shift begins. Thank you.

—> Purchase or Repair:
#JLG by Darshak Kothari on 2013-07-17 23:55
the JLG Smart System 1600258 on one of the AWP units went down mid-shift. Please troubleshoot and repair it first thing in the morning to avoid further delays. Thanks!

—> Purchase or Repair:
#JLG by Amr Salama on 2013-03-05 01:49
The JLG 7013310 631/40038 equipment is displaying error code E205. The DC motor is not responding and the equipment is unable to move. Please advise on troubleshooting steps or repairs needed to restore functionality.

—> Purchase or Repair:
#JLG by Svein Eirik Olsen on 2014-11-03 04:57
heads up. Just found an issue with the JLG 1600292 controller, looks like one of the drives or boards just failed. Will investigate further.

—> Purchase or Repair:
#JLG by TC CHOU on 2015-08-15 07:20
Hi there, Could you please provide repair information for a JLG E300AJP 1600292 Articulator? Our machine has stopped working and we need a replacement part urgently. Thank you.

—> Purchase or Repair:
#JLG by mike shaw on 2014-12-17 10:44
Hi there! Could you please provide repair information for a JLG AU3019 control module with the serial number 1600258? Thanks in advance for your help!

—> Purchase or Repair:
#JLG by Raul Martinez on 2008-09-16 19:42
Could the JLG AU3019 1600258 Smart System Controller be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Wegman on 2015-02-26 14:07
The JLG AU3019 1600258 controler is not functioning properly.

—> Purchase or Repair:
#JLG by Liseno on 2014-04-04 02:29
Hello, I am interested in purchasing the JLG AU3019 1600289 Control Module. Could you please provide information on pricing and availability? I am looking to source this unit quickly. Thank you.

—> Purchase or Repair:
#JLG by keivan on 2014-12-12 11:16
Hi there, I hope you're doing well. I'm interested in purchasing the JLG AU3019 1600258 Control Module for a unit we have. Can you please provide information on the pricing and availability? We are looking to source this part quickly. Thank you.

—> Purchase or Repair:
#JLG by Rajalaxmi on 2013-08-12 08:35
Hello, could you please provide assistance with JLG Smart System 1600258? It's a controller for an aerial work platform, and my client is experiencing issues with it. Thank you!

—> Purchase or Repair:
#JLG by BEZAIRE on 2013-02-24 23:40
I'm experiencing an issue with the JLG 1600286 control for the aerial work platform. It seems like something has stopped working but I'm not exactly sure what it is. Can someone please assist with troubleshooting and fixing this problem?

—> Purchase or Repair:
#JLG by John Vegh on 2015-01-09 19:41
Hi there, could you please provide repair info for a JLG AU1830 631/40038 DC Motor Controller? We need a replacement part urgently. Thanks!

—> Purchase or Repair:
#JLG by Weldon Rop on 2015-08-08 19:20
The JLG AU1830 631/40038 DC Motor Controller is not working as reported.

—> Purchase or Repair:
#JLG by Burdges on 2015-07-11 17:32
We are experiencing issues with the DC motor controller (JLG 7013310 631/40038) on the production line. Urgent repair is needed to resume operations

—> Purchase or Repair:
#JLG by walters on 2012-09-21 18:47
Hello, I am inquiring about part number 1600286 for a JLG AU3019 controller. My client is experiencing issues with this part and may require repair or replacement. Could you provide me with more information on this component and potential solutions? Thank you.

—> Purchase or Repair:
#JLG by albertoli on 2013-08-12 18:35
The control board on the JLG 1600286 seems to be malfunctioning or experiencing some issues. It's causing the equipment to act up, and something has stopped working as expected. It might be best to have a technician take a look to diagnose and resolve the problem.

—> Purchase or Repair:
#JLG by Al or Lori Hyde on 2015-07-24 20:43
The JLG MOS 60 D 631/40077 is displaying error code 15 indicating a fault in the DC Motor Controller. The equipment is currently down, and we need immediate assistance to diagnose and resolve this issue.

—> Purchase or Repair:
#JLG by John Casper on 2013-07-26 00:32
The maintenance team reported an issue with JLG 1600286, which is the control for the aerial work platform.

—> Purchase or Repair:
#JLG by Ian Graves on 2013-11-02 01:52
The JLG 1600286 is not functioning. Please check and repair as needed.

—> Purchase or Repair:
#JLG Start System by Lemmon on 2016-03-19 21:03
Hello, I'm interested in purchasing the JLG Start System AU3019 1600258 Controller. I am unsure if this is the correct model, but my team recommended I reach out to inquire further. Can you please provide information on pricing and availability as I am looking to source one quickly? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by QUINONEZ on 2013-05-29 07:02
The JLG 7013310 631/40038 is showing error code E324. Equipment is not responding to controls. Please advise next steps for troubleshooting and repair.

—> Purchase or Repair:
#JLG by Jamil Ahmed on 2012-08-30 17:31
Controller for JLG AU3019 1600286 just failed. Need immediate diagnosis and replacement.

—> Purchase or Repair:
#JLG by mark corby on 2012-08-05 17:24
Hello, I am interested in purchasing the JLG 1600346 PROA70481 power module for quick sourcing. Could you please provide me with information regarding pricing and availability? Thank you.

—> Purchase or Repair:
#JLG by bart hinesly on 2013-05-11 04:45
JLG 1600286 controller displaying error code E355.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.