JLG Service & Repair Forum

The controller on my JLG AU3019 is unresponsive, and the equipment won't operate properly. Need an expert to diagnose and fix this issue

—> Purchase or Repair: Ticket Image

— Posted by Clifford on 2019-05-02

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Colin Crown on 2014-07-29 11:24
The control unit on JLG AU3019 1600258 is malfunctioning, resulting in a halt in production. Immediate repair is required to resume operations smoothly.

—> Purchase or Repair:
#JLG by reidar on 2014-01-03 10:07
Could you please provide pricing and availability for the JLG AU3019 1600258 control unit? We are looking to source one quickly and would appreciate your assistance. Thank you!

—> Purchase or Repair:
#JLG by Joel Schambeau on 2014-12-18 15:44
JLG 1600292 controller malfunctioning, halting production line. Immediate repair needed to resume operations.

—> Purchase or Repair:
#JLG by blannybuS on 2015-08-05 00:20
I'm reporting a downtime incident with the JLG AU3019 1600258 due to an issue with the controller. Can you provide a quick overview of what happened and when? It's crucial to address this before the next shift begins.

—> Purchase or Repair:
#JLG by keaggy on 2015-02-27 08:07
Hi, I need assistance with the JLG AU1830 631/40038. The equipment is displaying error code E322. Would appreciate guidance in resolving this issue

—> Purchase or Repair:
#JLG by Salter on 2014-11-26 13:14
Could you please confirm if the JLG 59110003 1600292 Power Supply model is still supported or if replacement parts are available? We need to determine the best course of action for repair or replacement. Thank you.

—> Purchase or Repair:
#JLG by Jinwhoe on 2013-04-06 09:57
The JLG 1600286 control panel is displaying error code 452. The platform is not responding to any commands. Please advise on troubleshooting steps or repair needed. Thank you.

—> Purchase or Repair:
#JLG by Cordova on 2013-07-18 11:44
Could you please verify if the JLG 1600286 control board is still supported or if replacement parts are available? It's an older unit, and we're unsure about the manufacturer. Thank you.

—> Purchase or Repair:
#JLG by End on 2015-03-16 19:25
JLG AU3019 1600258 is displaying Error Code 1234 - "Controller Malfunction". Equipment is unresponsive and not operating. Please advise on next steps for repair.

—> Purchase or Repair:
#JLG by Darshak Kothari on 2013-07-17 23:55
the JLG Smart System 1600258 on one of the AWP units went down mid-shift. Please troubleshoot and repair it first thing in the morning to avoid further delays. Thanks!

—> Purchase or Repair:
#JLG by Tom Spence on 2012-09-20 02:15
The JLG AU3019 1600286 controller is not working.

—> Purchase or Repair:
#JLG by Nate on 2012-05-14 20:30
My JLG AU3019 1600286 controller is malfunctioning, and I need it fixed urgently to resume operations. Looking for a reliable repair service to address the issue

—> Purchase or Repair:
#JLG by taslim on 2015-07-24 15:20
The JLG AU3019 1600286 unit is down, issue with the Smart System drive. Heading to check the drive or board, will provide an update soon.

—> Purchase or Repair:
#JLG by Lynn Luzzi on 2015-08-06 19:20
I'm currently facing an issue with the JLG AU3019 1600286. It seems like the Smart System drive may not be functioning properly. Your assistance in troubleshooting and fixing this would be greatly appreciated.

—> Purchase or Repair:
#JLG by SUMEET on 2015-07-24 21:43
Can the JLG AU1830 631/40038 DC Motor Controller be repaired or bought? Just trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Callaghan on 2013-05-16 17:54
Can this JLG 1600286 control board be repaired or purchased? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by Frode on 2014-07-02 17:57
The Control Module on JLG AU3019 1600258 is malfunctioning, impacting the production line. Urgent repair service is needed to restore operations

—> Purchase or Repair:
#JLG by Rachel Nachum on 2013-07-23 19:32
Hello, could you please provide repair information for JLG 1600286 control for aerial work platform? Our equipment is down, and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#JLG by Nooprasit on 2013-08-17 06:32
My JLG Smart System 1600258 controller is malfunctioning, and I need to find a technician who can repair it as soon as possible. The unit is not responding to any commands, causing delays in our work.

—> Purchase or Repair:
#JLG by Lazaros Papazoglou on 2025-06-07 07:00
I'm currently facing an issue with the JLG 1600267 machine something seems to have stopped working. I believe it has to do with the joystick controller, but I'm uncertain about the specifics. Would appreciate assistance in diagnosing and resolving the problem.

—> Purchase or Repair:
#JLG by AMERICA on 2014-11-01 11:57
Hi there, I'm interested in purchasing a JLG AU3019 1600258 Control Module. I wanted to check with you about the pricing and availability as I'm looking to source one quickly. Thank you!

—> Purchase or Repair:
#JLG by Raul Martinez on 2008-09-16 19:42
Could the JLG AU3019 1600258 Smart System Controller be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Aaronson on 2015-03-09 05:13
The JLG MOS 60 D 631/40077 DC Motor Controller is displaying unusual behavior in the warehouse. It is not functioning normally and appears to be acting erratically.

—> Purchase or Repair:
#JLG by Davidiconi on 2014-03-13 12:02
The JLG 1600286 is a controller unit that is currently not functioning as expected. Please have the maintenance team check it out.

—> Purchase or Repair:
#JLG by George Kolacny on 2013-02-26 07:28
The JLG 1600286 controller is exhibiting unusual behavior in the warehouse. It is not performing its normal functions and acting strangely.

—> Purchase or Repair:
#JLG by QUINTANILLA on 2014-11-02 13:57
Hello, I am inquiring about the JLG AU3019 Control Unit with serial number 1600258. We are looking for information on whether this unit is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:
#JLG by JOSE VALDES on 2014-11-03 03:57
Could you please confirm if the JLG AU3019 1600258 Control Module is still supported or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by Robin Mohns on 2008-11-12 14:59
Hello, I'm interested in purchasing the JLG AU3019 1600258 Smart System Controller. I'd like to inquire about pricing and availability. Also, if possible, I need to source one quickly. Thank you!

—> Purchase or Repair:
#JLG by Stoll on 2015-07-24 11:43
My JLG AU3019 1600258 controler is malfunctioning, and I need it repaired as soon as possible to resume work on the industrial unit.

—> Purchase or Repair:
#JLG Smart System by Volau on 2010-09-03 04:13
Can the JLG Smart System AU3019 1600286 be repaired or replaced? Looking to check this off my to-do list.

—> Purchase or Repair:
#JLG by Solomon on 2013-08-20 23:32
We experienced downtime with JLG 7013310 631/40038, a DC motor controller. It happened earlier during this shift. Could you please provide some insight into what may have caused the issue? Thank you.

—> Purchase or Repair:
#JLG Start System by VICTOR CHANG on 2016-02-10 03:03
The JLG Start System AU3019 1600258 is not functioning properly. Maintenance team needs assistance with the controller.

—> Purchase or Repair:
#JLG by Ban on 2015-07-23 16:39
I need repair for my JLG 7013310 631/40038 DC Motor Controller as it is not functioning properly. Looking for someone who can diagnose and fix the issue

—> Purchase or Repair:
#JLG by John Casper on 2013-07-26 00:32
The maintenance team reported an issue with JLG 1600286, which is the control for the aerial work platform.

—> Purchase or Repair:
#JLG by jiang on 2012-05-03 09:18
The JLG AU3019 1600286 controller is malfunctioning. It is not responding as expected and displaying unusual behavior.

—> Purchase or Repair:
#JLG by ronnie lemon on 2013-04-05 23:57
Hello, I am interested in the JLG 7013310 631/40038 DC motor controller. I would like to inquire about the pricing and availability of this unit as I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by Victor manuel Padill on 2013-02-18 03:49
Could you please provide information on the JLG 1600286 unit controller? We are interested in knowing if it is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:
#JLG by rasnake on 2013-07-25 19:32
Please provide an update on the status of the JLG 1600286 control board. It is imperative that we resolve this issue

—> Purchase or Repair:
#JLG Smart System by sakkinen on 2008-02-04 00:33
I need assistance with my JLG Smart System AU3019 1600258 controller. Our unit is down, and I need to keep production running. Do you have one available for repair or sale?

—> Purchase or Repair:
#JLG by Burdges on 2015-07-11 17:32
We are experiencing issues with the DC motor controller (JLG 7013310 631/40038) on the production line. Urgent repair is needed to resume operations

—> Purchase or Repair:
#JLG by Johannes on 2013-07-31 02:32
The JLG Smart System 1600258 controller for the aerial work platform has malfunctioned. Unit is currently down; needs immediate attention. Please address this issue on the next shift.

—> Purchase or Repair:
#JLG by Gustavo Diaz on 2025-04-07 17:43
: My JLG PROA70481 1600346 controller is experiencing intermittent issues where it intermittently stops working properly, causing the boom to malfunction. I'm seeking information on repair costs and whether a replacement unit would be more cost-effective in this instance. Could you please provide me…Purchase or Repair: Ticket Image...
Show More
#JLG by Chung on 2015-07-25 16:20
I'm facing an issue with the JLG AU3019 1600286. It seems like the Smart System drive is not functioning properly. I'd appreciate any help in troubleshooting this problem.

—> Purchase or Repair:
#JLG by John Vegh on 2015-01-09 19:41
Hi there, could you please provide repair info for a JLG AU1830 631/40038 DC Motor Controller? We need a replacement part urgently. Thanks!

—> Purchase or Repair:
#JLG by Alessandro Panichi on 2012-02-22 15:56
JLG AU3019 1600286 Controller not powering up, preventing machine operation.

—> Purchase or Repair:
#JLG by Sheila Del Padre on 2012-11-02 08:45
The JLG Smart System AU3019 controller in the warehouse is not functioning normally. It is exhibiting erratic behavior and not responding as expected.

—> Purchase or Repair:
#JLG by Klaus Ullmann on 2013-08-15 17:01
Hello, I hope you're doing well. I'm interested in purchasing a JLG 7013310 631/40038 DC motor controller. Could you please provide me with information regarding the pricing and availability of this unit? I'm looking to source one quickly. Thank you!

—> Purchase or Repair:
#JLG by Gruhl on 2013-08-18 00:32
We encountered an issue with the JLG Smart System 1600258 controller for our aerial work platform earlier today, causing downtime from 230 PM to 345 PM. Could you please provide some insights on what might have caused this malfunction? We need to have this resolved before the next shift. Thank you. …Purchase or Repair: Ticket Image...
Show More
#JLG by Nikola on 2015-11-17 20:49
Please provide assistance with JLG E300AJP 1600292, an Articulator. Thank you.

—> Purchase or Repair:
#JLG by blade-studentKl on 2012-11-21 04:47
The JLG 1600346 PROA70481 power module is not performing normally. It is exhibiting strange behavior that is unusual for its regular operations.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.