JLG Service & Repair Forum

Experiencing issues with JLG AU3019 1600258 Smart System Controller. Need repair service ASAP.

—> Purchase or Repair: Ticket Image

— Posted by Gary Mrosko on 2008-06-23

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Mark Krohn on 2014-02-16 21:58
JLG 1600258 controller not responding.\

—> Purchase or Repair:
#JLG by Cordova on 2013-07-18 11:44
Could you please verify if the JLG 1600286 control board is still supported or if replacement parts are available? It's an older unit, and we're unsure about the manufacturer. Thank you.

—> Purchase or Repair:
#JLG by roland MIRANDA on 2014-11-28 21:16
I'm experiencing an issue with the JLG 1600292 controller. It seems that something may have stopped working. I will need assistance to troubleshoot and resolve the problem.

—> Purchase or Repair:
#JLG by Francisco Faus on 2014-12-24 05:06
the JLG AU3019 1600289 unit went down mid-shift. Issue is with the Control Module. Need someone to check it out during the day. Thanks!

—> Purchase or Repair:
#JLG Smart System by rai on 2025-06-08 15:14
The JLG Smart System AU3019 1600286 controller is displaying error code E123. Equipment is not responding to commands. Please advise on troubleshooting steps or repair options.

—> Purchase or Repair:
#JLG by Suliman on 2012-02-21 08:12
I need repairs for my JLG AU3019 1600286 controller. It's not powering up when I try to operate the equipment. Need help ASAP to get it back up and running.

—> Purchase or Repair:
#JLG by Hosawi on 2014-03-25 04:30
The JLG AU3019 1600289 is down due to a faulty Control Module. Needs to be checked and replaced as soon as possible. Thanks!

—> Purchase or Repair:
#JLG by Jinwhoe on 2013-04-06 09:57
The JLG 1600286 control panel is displaying error code 452. The platform is not responding to any commands. Please advise on troubleshooting steps or repair needed. Thank you.

—> Purchase or Repair:
#JLG by Jesus Mª Matarranz Leon on 2013-07-29 03:32
Hello, I am interested in the JLG 1600286 control for the aerial work platform. I am trying to purchase this unit quickly but want to confirm if this is the right model. Could you please provide information on pricing and availability? Thank you.

—> Purchase or Repair:
#JLG by Chinmaya on 2013-04-12 05:15
One of the drives or boards on the JLG Smart System 1600258 just failed. Need to investigate and replace ASAP to get this machine back up and running.

—> Purchase or Repair:
#JLG by Chlela on 2013-07-16 01:44
The JLG 1600286 controller has malfunctioned; need to replace a drive or board. Will troubleshoot thoroughly once back at the workshop.

—> Purchase or Repair:
#JLG by Adan Martin on 2013-07-31 06:32
The machine is not functioning properly, and it seems to be related to the control board. It would be best to have a technician look into it to determine the exact issue. Thank you for bringing this to our attention.

—> Purchase or Repair:
#JLG by Ian Graves on 2013-11-02 01:52
The JLG 1600286 is not functioning. Please check and repair as needed.

—> Purchase or Repair:
#JLG by Rajkumar on 2012-01-01 22:53
the JLG 1600346 PROA70481 power module is malfunctioning. Unit is currently not operational. Please troubleshoot and repair ASAP. Thanks!

—> Purchase or Repair:
#JLG by GERRALD on 2014-12-15 20:44
The JLG AU3019 1600289 control module is not functioning properly. Please inspect and repair as necessary.

—> Purchase or Repair:
#JLG Smart System by linda benton on 2010-07-22 21:45
JLG Smart System AU3019 1600286 not responding to any commands.

—> Purchase or Repair:
#JLG by Bela on 2012-04-13 08:38
Could you please confirm if the JLG Smart System AU3019 Controller is still supported and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG Smart System by Volau on 2010-09-03 04:13
Can the JLG Smart System AU3019 1600286 be repaired or replaced? Looking to check this off my to-do list.

—> Purchase or Repair:
#JLG by Contador on 2015-10-14 15:15
Looking to repair my JLG MOS 60 D 631/40077 DC Motor Controller. It's not responding or functioning correctly. Need assistance from a qualified technician. Thank you.

—> Purchase or Repair:
#JLG by Matthew Jimenez on 2012-06-07 14:49
The JLG AU3019 1600286 controller is exhibiting unusual behavior in the warehouse. It is not functioning as it normally does.

—> Purchase or Repair:
#JLG by Mihael on 2008-11-10 18:10
Hello, this is a follow-up regarding the JLG AU3019 1600258 Smart System Controller. The unit is still down. Please provide an update

—> Purchase or Repair:
#JLG by Gerald Mansfield on 2013-08-07 05:32
The JLG 1600286 control for our aerial work platform is malfunctioning, inhibiting the unit's functionality. We require immediate repairs to ensure smooth operation at our worksite.

—> Purchase or Repair:
#JLG by Al Aguiniga on 2015-07-19 20:20
We experienced downtime on the JLG 7013310 631/40038 DC Motor Controller unit earlier today. Can you provide some insight into what caused the issue and when it occurred? Your quick response would be greatly appreciated before the next shift begins. Thank you!

—> Purchase or Repair:
#JLG by Tim Curran on 2013-05-10 22:45
The JLG Smart System 1600258 controller for an aerial work platform has malfunctioned and needs to be looked at immediately.

—> Purchase or Repair:
#JLG by Marc Nachtwey on 2015-01-09 06:41
Hello, do you have a JLG AU1830 631/40038 DC Motor Controller available for sale or repair? It's for urgent production needs. Thank you.

—> Purchase or Repair:
#JLG by Abby on 2015-04-14 23:18
I'm experiencing an issue with the JLG AU1830 631/40038, specifically with the DC Motor Controller. It seems like something has stopped working, but I'm not sure exactly what the problem is. I would appreciate any assistance or advice you can provide to help troubleshoot and resolve this issue. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by Seje on 2013-08-13 21:32
Control board on JLG 1600286 just went down, drive system affected. Need urgent repair.

—> Purchase or Repair:
#JLG by Firma on 2012-02-08 22:33
The JLG AU3019 1600286 controller unit is not working.

—> Purchase or Repair:
#JLG by Marin Graur on 2013-08-21 22:32
Please provide an update regarding the repair status of the JLG 7013310 631/40038 DC motor controller. It is crucial that we receive a

—> Purchase or Repair:
#JLG by AMIT on 2015-01-11 17:41
The JLG AU3019 1600286 is down due to a Smart System drive issue. Please have someone look into it first thing in the morning.

—> Purchase or Repair:
#JLG by Marc Poisson on 2014-10-27 07:18
Can the JLG AU3019 1600258 Control Module be repaired or purchased? I'm trying to get this checked off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by Jeiner Jhampier Riofrio Zapata on 2015-07-22 21:43
Hi team, the JLG AU3019 1600286 is down due to a Smart System drive issue. Needs attention ASAP. Thanks!

—> Purchase or Repair:
#JLG by Ed Gutierrez on 2012-01-04 01:41
the JLG Smart System AU3019 controller for Unit 7 went down mid-shift. Please check and fix it during the day shift. Thanks!

—> Purchase or Repair:
#JLG by BEZAIRE on 2013-02-24 23:40
I'm experiencing an issue with the JLG 1600286 control for the aerial work platform. It seems like something has stopped working but I'm not exactly sure what it is. Can someone please assist with troubleshooting and fixing this problem?

—> Purchase or Repair:
#JLG by md.ali hossain khan on 2013-05-14 13:48
Hi, the JLG 1600286 isn't responding when attempting to raise or lower the platform. No error code is displaying, but the controls seem unresponsive. Please advise on troubleshooting steps. Thank you.

—> Purchase or Repair:
#JLG by JITENDRA on 2015-03-07 09:15
I was informed that the JLG MOS 60 D 631/40077 is a DC Motor Controller unit that is currently not working.

—> Purchase or Repair:
#JLG by pedram on 2015-08-03 21:20
The JLG AU3019 1600258 controler is malfunctioning, causing delays in production. Please address this issue immediately to resume operations smoothly.

—> Purchase or Repair:
#JLG by Pakpoom on 2013-07-16 06:44
I need repair service for a JLG 7013310 631/40038 DC motor controller. It seems to be malfunctioning and impacting our operations. Thank you.

—> Purchase or Repair:
#JLG Smart System by MOINUDDIN on 2008-03-07 23:19
Please prioritize getting back to me regarding the JLG Smart System AU3019 1600258 controller issue. The unit is still down and needs immediate attention. Thank you.

—> Purchase or Repair:
#JLG by Mortenson on 2014-12-24 21:06
Could you please confirm if the JLG 59110003 1600292 Power Supply is still supported, or if replacement parts are available for this unit? It is an older model, and our team is unsure of the manufacturer. Thank you.

—> Purchase or Repair:
#JLG by William Jimenez on 2014-11-21 19:12
JLG AU3019 1600258 control unit not responding, machine unable to function.

—> Purchase or Repair:
#JLG by Debra Posey on 2012-06-13 02:06
The JLG Smart System AU3019 controller is displaying an error message and preventing the machine from functioning.

—> Purchase or Repair:
#JLG by çäîðîâüå on 2015-07-09 11:14
The JLG AU1830 631/40038 is showing Error Code 123. Need immediate assistance to diagnose and fix the issue. Equipment is currently down, and production is stalled.

—> Purchase or Repair:
#JLG by Andrew Walford on 2013-08-01 14:32
The control board on JLG 1600286 is behaving abnormally. It is not responding as it typically does, and the unit is not functioning normally.

—> Purchase or Repair:
#JLG by Sheila Del Padre on 2012-11-02 08:45
The JLG Smart System AU3019 controller in the warehouse is not functioning normally. It is exhibiting erratic behavior and not responding as expected.

—> Purchase or Repair:
#JLG by MARK W CONKLIN on 2014-02-18 04:12
I'm experiencing issues with the JLG AU3019 1600289 Control Module. It seems like something has stopped working, but I'm not entirely sure what it does. Any assistance would be greatly appreciated.

—> Purchase or Repair:
#JLG by keivan on 2014-12-12 11:16
Hi there, I hope you're doing well. I'm interested in purchasing the JLG AU3019 1600258 Control Module for a unit we have. Can you please provide information on the pricing and availability? We are looking to source this part quickly. Thank you.

—> Purchase or Repair:
#JLG by Swartos on 2013-08-13 05:35
I need assistance with JLG part number 1600286, which is a Controller. My client is experiencing issues with it. Please provide information on how to resolve this problem. Thank you.

—> Purchase or Repair:
#JLG by blade-studentKl on 2012-11-21 04:47
The JLG 1600346 PROA70481 power module is not performing normally. It is exhibiting strange behavior that is unusual for its regular operations.

—> Purchase or Repair:
#JLG by Sanket on 2016-11-29 22:02
I'm having trouble with the JLG AU3019 1600289 controller. Something seems to have stopped working, but I'm not exactly sure what the issue is. Could you please take a look and help me troubleshoot this problem? Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.