John Deere Service & Repair Forum

I will send a message regarding the non-functioning John Deere RE64583 7SUD5JD04 unit.

—> Purchase or Repair: Ticket Image

— Posted by Ginsburg on 2013-02-19

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 327 Comments

#John Deere by Bateman on 2014-01-18 03:45
The John Deere RE43902 controller is not working. Please check and repair as needed.

—> Purchase or Repair:
#John Deere by Ondracek on 2015-07-29 20:20
The issue affecting the John Deere RE46704 7AT2JD01 is that the Tach Display doesn't turn on when cold. This is impacting production and needs immediate attention to ensure smooth operations. Please prioritize this repair to avoid any further disruptions to the line.

—> Purchase or Repair:
#John Deere by ARUMOY CHATTERJEE on 2011-04-07 15:48
John Deere RE66821 7AT6JD01 Analog Tachometer issue Drive or board failure. Requires immediate troubleshooting and replacement.

—> Purchase or Repair:
#John Deere by Tran Minh on 2013-02-25 12:48
Hello, I've noticed that the John Deere Bale Trak Plus RE159944 is displaying abnormal behavior. Instead of functioning as usual, it seems to be acting strangely. Thank you for looking into this issue for me.

—> Purchase or Repair:
#John Deere by Kelly B Adams on 2015-07-27 09:20
The John Deere RE65483 7SUD5JD04 unit is related to the SCV Setup Panel and is currently not functioning as expected. That's the information I have at the moment.

—> Purchase or Repair:
#John Deere by Dag on 2015-02-23 11:47
The John Deere RE46704 7AT2JD01 experienced downtime due to the tach display not turning on when cold. To address this issue

—> Purchase or Repair:
#John Deere by Jerry Fields on 2013-08-19 06:32
SCV Setup panel on John Deere RE64583 7SUD5JD04 is malfunctioning, halting the production line. Urgent repair service required to restore operation immediately.

—> Purchase or Repair:
#John Deere by Derrick Taylor on 2014-12-24 12:06
I'm sorry to hear that your John Deere RE43902 7MRT2JD02 controller is no longer functioning properly. It seems like there might be an issue with its operation. I recommend reaching out to a technician for a closer look and assessment.

—> Purchase or Repair:
#John Deere by George Hostutler on 2013-04-05 19:37
The John Deere RE64583 7SUD5JD04 is displaying error code E342. The SCV setup panel is unresponsive, preventing operation of the equipment. Please advise on troubleshooting steps or necessary repairs. Thank you.

—> Purchase or Repair:
#John Deere by Jacob Bergen on 2024-08-23 10:45
I have a John Deere RE219402 controller that is not functioning properly. The unit fails to power on and does not respond to any input commands. I have attempted to troubleshoot the issue by checking all connections and ensuring proper power supply, but the problem persists. Based on my assessment, …Purchase or Repair: Ticket Image...
Show More
#John Deere by Slava Berenshteyn on 2015-07-19 15:20
the John Deere RE49192 7THM2JD03 tachometer unit went down mid-shift. Please check it out and troubleshoot first thing in the morning. Thanks!

—> Purchase or Repair:
#John Deere by Wisnu R Maulana on 2015-03-10 05:13
Please provide an update on the status of my John Deere RE66265 7MRT8JDO1E Digital Tachometer. This issue needs

—> Purchase or Repair:
#John Deere by DAVID LEHMANN /ZIONS on 2013-12-27 17:43
Please provide an update on the John Deere RE64583 7SUD5JD04 SCV setup panel issue. The unit is still down. We need immediate attention on this matter.

—> Purchase or Repair:
#John Deere by Mark W Griffin on 2013-02-19 03:27
Do you have a replacement John Deere RE64583 SCV Setup panel available for purchase or repair? Production has been interrupted, and we need to keep things running smoothly.

—> Purchase or Repair:
#John Deere by Stith on 2014-12-25 19:06
Experiencing issues with my John Deere RE43902 7MRT2JD02 controller unit. Need repairs or troubleshooting assistance.

—> Purchase or Repair:
#John Deere by Ansarudi on 2014-12-15 19:44
Please provide an update on our John Deere RE64583 7SUD3JD01 with the SCV Setup panel. The unit is still down. We need assistance urgently.

—> Purchase or Repair:
#John Deere by Lou Pennacchia on 2018-08-19 00:00
Repair Inquiry for John Deere Greenstar ControllerDear Repair Shop,I am reaching out on behalf of my client who is experiencing an issue with their John Deere Greenstar Controller. The part number is not specified, but they are encountering functionality problems with the controller.Could you please…Purchase or Repair: Ticket Image...
Show More
#John Deere by gang on 2016-06-01 06:22
John Deere RE172237 7VMU0JD01 Vehicle Monitor Not displaying any data or responding to inputs.

—> Purchase or Repair:
#John Deere by dewi puspa on 2015-12-11 13:15
The Tach Display on John Deere RE46704 7AT2JD01 doesn't come on when cold.

—> Purchase or Repair:
#John Deere by G K SEYMOUR on 2015-07-18 08:20
Can the John Deere RE64583 7SUD3JD01 SCV Setup Panel be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Derek Baker on 2016-03-23 17:19
John Deere 120974T AT167497 Monitor is malfunctioning, impacting production line efficiency. Urgent repair needed to resume operations

—> Purchase or Repair:
#John Deere by Michael Groll on 2025-06-03 19:00
I can definitely help you with that. I'll reach out to inquire about the support and availability of parts for the John Deere RE218346 controller.

—> Purchase or Repair:
#John Deere by HELLENIC on 2013-05-13 23:20
Can you please provide information on whether the John Deere RE64583 7SUD5JD04 SCV setup panel is still supported and if replacement parts are available at this time? Thank you.

—> Purchase or Repair:
#John Deere by mixon on 2014-12-22 11:44
Can the John Deere RE64583 7SUD5JD04 motor control be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Mon Torres on 2015-02-17 20:24
I need assistance with my John Deere AT320355 AT320694, which is a CAN Monitor Unit. It's an older unit, and we're unsure of the manufacturer. Can you please confirm if it's still supported or if replacement parts are available?

—> Purchase or Repair:
#John Deere by radu on 2014-02-15 13:58
The John Deere RE64583 7SUD5JD04 is down due to a MOTOR CONTROL issue. Please follow up during the day. Thank you.

—> Purchase or Repair:
#John Deere by Miguel Reyes on 2011-09-09 07:35
Please provide me with more information about the John Deere RE66821 7AT6JD01 Analog Tachometer. I need to know if it is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:
#John Deere by sergio garcia on 2019-08-23 21:44
: Our industrial oven has stopped working properly. It will turn on but won't heat up consistently and is fluctuating between high and low temperature ranges. This issue prevents us from completing our baking tasks efficiently, which significantly impacts production deadlines and quality control. Ba…Purchase or Repair: Ticket Image...
Show More
#John Deere by Les Abend on 2015-08-08 05:20
Could you please provide repair information for a John Deere RE64583 7SUD5JD04 SCV Setup Panel? We need a replacement part urgently, but can't locate one. Your

—> Purchase or Repair:
#John Deere by Mutha on 2013-05-17 11:54
Could you please confirm if the John Deere RE63440 7SUD4JD03 SCV setup Panel is still supported or if replacement parts are available? Thank you!

—> Purchase or Repair:
#John Deere by s b sharma on 2015-07-31 05:20
I believe there's an issue with the digital tachometer on the John Deere RE66265 7MRT8JDO1E. It seems like the digital display has stopped working properly. Would you like me to investigate further or seek help from a technician?

—> Purchase or Repair:
#John Deere by linville on 2015-08-01 00:20
Hello, I'm reaching out regarding the John Deere RE65483 7SUD5JD04 SCV Setup Panel. Could you please confirm if this can be repaired or needs to be replaced? I'm trying to address this

—> Purchase or Repair:
#John Deere by Pennington on 2015-07-09 18:21
Can the John Deere RE49192 Tachometer be repaired or purchased? I'm looking to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Haldor on 2013-11-16 23:30
The John Deere Bale Trak Plus RE159944 is not functioning properly and needs maintenance.

—> Purchase or Repair:
#John Deere by p.srinivasu on 2015-07-29 10:20
Can you please provide information on whether the John Deere AT320355 AT320694 CAN Monitor Unit is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#John Deere by Aguiniga on 2016-02-29 12:47
John Deere RE64583 7SUD5JD04 - SCV Setup Panel failure alert during rounds. Investigating drive or board issue now.

—> Purchase or Repair:
#John Deere by Eddie Samaniego on 2015-04-27 18:58
I can assist you with that. I will check if the John Deere RE66265 7MRT8JDO1E digital tachometer is still supported or if replacement parts are available.

—> Purchase or Repair:
#John Deere by ahmed gomaa on 2015-07-08 23:32
Hi, the John Deere RE64583 7SUD3JD01 is showing error code SCV Setup Panel. Equipment is currently down and in need of urgent repair. Thank you.

—> Purchase or Repair:
#John Deere by christian lahoud on 2013-07-13 23:57
Do you have a replacement John Deere RE63440 7SUD4JD03 SCV setup Panel available? It's critical for keeping production running smoothly. Thank you.

—> Purchase or Repair:
#John Deere by Amanda Waters on 2013-07-06 00:09
The John Deere RE63440 7SUD4JD03 SCV setup panel is not functioning as expected. It seems to be acting unusual and not performing its usual functions.

—> Purchase or Repair:
#John Deere by RJ GARCIA on 2014-02-15 23:58
Hi there, we have a John Deere RE43902 7MRT2JD02 controller that stopped working and we need a replacement. Could you please provide us with the repair information for this part? We need a quick solution. Thank you!

—> Purchase or Repair:
#John Deere by sonnico on 2015-08-12 17:20
My client is experiencing an issue with part number RE46704 7AT2JD01 where the tach display doesn't come on when cold. Can you provide guidance on troubleshooting and potentially fixing this problem? Thank you.

—> Purchase or Repair:
#John Deere by Nikolay Georgiev on 2015-07-17 21:20
The tachometer on John Deere RE49192 7THM2JD03 is not working.

—> Purchase or Repair:
#John Deere by mohit on 2013-10-22 16:18
SCV Setup panel displaying error code E023.

—> Purchase or Repair:
#John Deere by Baleras on 2015-07-07 15:32
Can the SCV Setup Panel for the John Deere RE65483 7SUD5JD04 be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Addams on 2015-07-14 08:20
Please provide an update on the John Deere RE64583 7SUD3JD01 SCV Setup Panel issue. The unit is still not working, and we need a response as soon as possible.

—> Purchase or Repair:
#John Deere by larry palmer on 2025-06-08 07:22
Do you have a John Deere RE218346 controller available for sale or for repair? Need it urgently to keep production running.

—> Purchase or Repair:
#John Deere by jackpot18 on 2013-02-08 03:18
Hello, I need repair info for John Deere RE63440 7SUD4JD03 SCV Setup Panel. It's not working and we need a replacement. Please advise. Thank you!

—> Purchase or Repair:
#John Deere by Danladi A Birdling on 2015-08-17 00:00
Assistance Required for John Deere A336395 Joystick ControllerHello ,Im reaching out on behalf of someone in the shop who needs help with the John Deere A336395 Joystick Controller. They mentioned that it's currently not working. Could you please provide guidance or assistance to resolve this issue?…Purchase or Repair: Ticket Image...
Show More
#John Deere by rivera on 2013-08-05 23:32
Hello, I'm interested in purchasing the John Deere RE63440 7SUD4JD03 SCV Setup Panel. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.