John Deere Service & Repair Forum

The John Deere RE64583 SCV Setup panel unit is displaying unusual behavior. The panel is not functioning as expected and is acting strangely.

—> Purchase or Repair: Ticket Image

— Posted by TOO on 2013-07-01

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 327 Comments

#John Deere by cotrus on 2015-07-13 10:20
Please follow up immediately regarding the John Deere AT320355 AT320694 CAN Monitor Unit. It is still not functioning, and we need a resolution as soon as possible.

—> Purchase or Repair:
#John Deere by TT on 2014-04-03 16:29
The John Deere RE43902 7MRT2JD02 Controller is malfunctioning, causing a halt in production. Urgent repair is needed to get the line running smoothly again.

—> Purchase or Repair:
#John Deere by Shaliah AM on 2015-07-12 03:32
The issue with the John Deere RE46704 7AT2JD01 is that the Tach Display fails to come on when cold. This is affecting the production line as it hinders visibility and monitoring. Immediate attention is required to resolve this issue

—> Purchase or Repair:
#John Deere by jianxin on 2013-07-17 10:55
Hello, I'm interested in purchasing the John Deere RE63440 7SUD4JD03 SCV setup Panel. Could you provide information about pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#John Deere by Nadler on 2015-07-17 23:20
Please advise if the John Deere RE64583 7SUD5JD04 SCV Setup Panel is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#John Deere by Jimmi on 2013-08-12 23:32
The SCV Setup panel on John Deere RE64583 7SUD5JD04 is malfunctioning, affecting the line. Urgently need repair service to address the issue and get production back on track.

—> Purchase or Repair:
#John Deere by Mon Torres on 2015-02-17 20:24
I need assistance with my John Deere AT320355 AT320694, which is a CAN Monitor Unit. It's an older unit, and we're unsure of the manufacturer. Can you please confirm if it's still supported or if replacement parts are available?

—> Purchase or Repair:
#John Deere by Su on 2013-12-12 20:58
John Deere RE63440 7SUD4JD03 SCV setup Panel unit went down mid-shift. Needs attention ASAP.

—> Purchase or Repair:
#John Deere by BRIAN STIGLIC on 2013-04-06 01:57
Do you have a John Deere RE63440 7SUD4JD03 SCV setup Panel available for sale or repair? Production is currently down and we need to get it up and running as soon as possible. Thank you.

—> Purchase or Repair:
#John Deere by mixon on 2014-12-22 11:44
Can the John Deere RE64583 7SUD5JD04 motor control be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Preston on 2015-09-30 01:00
The tach display on the John Deere RE46704 7AT2JD01 is not functioning when cold. This issue needs urgent attention to avoid disruptions to production. Please address the failing tach display

—> Purchase or Repair:
#John Deere by Nikolay Georgiev on 2015-07-17 21:20
The tachometer on John Deere RE49192 7THM2JD03 is not working.

—> Purchase or Repair:
#John Deere by djabeur on 2015-07-28 19:20
Looking for repair assistance with a John Deere RE64583 SCV Setup Panel unit that isn't functioning properly. Need a qualified technician to diagnose and fix the issue

—> Purchase or Repair:
#John Deere by Fitim Cena on 2014-12-24 07:06
The John Deere RE64583 7SUD3JD01 is not functioning correctly. It relates to the SCV Setup panel, although I am unsure of its exact purpose as I am new to the role.

—> Purchase or Repair:
#John Deere by Suliman on 2015-03-09 12:13
Looking for repair for John Deere RE66265 digital tachometer. The unit is not displaying any readings and seems completely dead. Need assistance from a professional technician.

—> Purchase or Repair:
#John Deere by Tri on 2016-01-21 01:13
John Deere RE64583 7SUD5JD04 issue SCV Setup Panel malfunctioned mid-shift. Need attention ASAP.

—> Purchase or Repair:
#John Deere by Mahesh Menon on 2013-12-25 12:17
Looking for repair services for a malfunctioning John Deere RE64583 unit. Issue SCV Setup panel not functioning correctly. Seeking immediate assistance to get this industrial unit back in operation.

—> Purchase or Repair:
#John Deere by REALI on 2015-08-06 21:20
The John Deere RE64583 7SUD3JD01 SCV Setup Panel is displaying abnormal behavior in the warehouse.

—> Purchase or Repair:
#John Deere by annmarie on 2014-11-01 01:57
Are you able to repair the John Deere RE64583 7SUD5JD04 motor control unit, or do you have a replacement available for sale? It's urgent to keep production running.

—> Purchase or Repair:
#John Deere by Swanepoel on 2011-04-11 19:20
The John Deere RE66821 7AT6JD01 analog tachometer unit is not working.

—> Purchase or Repair:
#John Deere by Prahlad on 2013-07-27 16:32
Hello, the John Deere RE64583 SCV setup panel on 7SUD5JD04 unit is not functioning properly. Please check and fix it. Thanks.

—> Purchase or Repair:
#John Deere by roger moutal on 2015-02-02 18:39
I'm interested in buying the John Deere RE65483 7SUD5JD04 SCV Setup Panel. Could you please provide information on pricing and availability? We're looking to source one quickly. Thank you.

—> Purchase or Repair:
#John Deere by Roslin on 2025-06-03 23:52
Can the John Deere RE551415 controller be repaired, or should it be replaced? I'm trying to get this fixed or replaced to check it off my to-do list. Thank you.

—> Purchase or Repair:
#John Deere by balli aulakh on 2015-08-05 18:20
The unit with part numbers AT320355 and AT320694, which is the CAN Monitor Unit, is behaving abnormally. It is not functioning as it normally does and appears to be acting strangely.

—> Purchase or Repair:
#John Deere by calvin haines on 2010-08-15 13:28
The unit with the digital display (John Deere Motorola RE64583) in the warehouse is exhibiting abnormal behavior. The display is flickering intermittently, and some of the buttons are not responding properly. It seems to be freezing up occasionally as well.

—> Purchase or Repair:
#John Deere by Bud Gibson on 2013-09-09 00:00
Experiencing malfunction with John Deere AH2244250 electronic control unit. Device not responding to commands or displaying error codes. Urgent repair needed.

—> Purchase or Repair:
#John Deere by Leo McCarthy on 2015-08-11 04:20
Drive or board failure in John Deere AT320355 AT320694 CAN Monitor Unit. Action needed ASAP.

—> Purchase or Repair:
#John Deere by Ika Lyana Ling on 2010-04-12 01:59
Hello, I'm interested in the John Deere Motorola RE64583 digital display unit. I'm trying to purchase one quickly but not 100% sure if this is the right model. Can you please provide information on pricing and availability? Thank you!

—> Purchase or Repair:
#John Deere by vbaskar on 2011-06-13 13:22
John Deere RE66821 7AT6JD01 Analog Tachometer drive or board just failed. Needs replacement ASAP.

—> Purchase or Repair:
#John Deere by Tran Minh on 2013-02-25 12:48
Hello, I've noticed that the John Deere Bale Trak Plus RE159944 is displaying abnormal behavior. Instead of functioning as usual, it seems to be acting strangely. Thank you for looking into this issue for me.

—> Purchase or Repair:
#John Deere by Robert J. Stark on 2015-07-15 07:20
John Deere RE64583 7SUD5JD04 - SCV Setup Panel not responding, halting production.

—> Purchase or Repair:
#John Deere by film on 2015-07-28 12:20
Unit RE46704 7AT2JD01 experienced downtime due to the Tach Display not coming on when cold. This issue occurred during the night shift and is currently affecting production. Please advise on a solution before the next shift starts.

—> Purchase or Repair:
#John Deere by Mark W Griffin on 2013-02-19 03:27
Do you have a replacement John Deere RE64583 SCV Setup panel available for purchase or repair? Production has been interrupted, and we need to keep things running smoothly.

—> Purchase or Repair:
#John Deere by Wisnu R Maulana on 2015-03-10 05:13
Please provide an update on the status of my John Deere RE66265 7MRT8JDO1E Digital Tachometer. This issue needs

—> Purchase or Repair:
#John Deere by SINGHAL on 2015-02-23 03:47
John Deere RE64583 7SUD5JD04 SCV Setup Panel not responding.

—> Purchase or Repair:
#John Deere by ilbay on 2014-11-01 20:57
Experiencing issues with my John Deere RE43902 7MRT2JD02 controller, not functioning properly. Looking for a skilled technician to diagnose and repair as soon as possible.

—> Purchase or Repair:
#John Deere by darren kotzur on 2011-06-07 19:38
Can the John Deere RE66821 7AT6JD01 Analog Tachometer be repaired or purchased to resolve the issue? Checking this off my to-do list.

—> Purchase or Repair:
#John Deere by Alexandre Moreira on 2014-12-28 20:06
The John Deere RE64583 7SUD5JD04 unit went down mid-shift due to a MOTOR CONTROL issue. Please have someone address it during the day shift. Thanks!

—> Purchase or Repair:
#John Deere by Rheal Guilbault on 2013-08-13 01:32
Bale Trak Plus RE159944 unit malfunctioned mid-shift. Please check and repair tomorrow.

—> Purchase or Repair:
#John Deere by Wayne Alderman on 2015-07-31 15:20
Do you have a John Deere RE49192 7THM2JD03 Tachometer available for sale or repair? Our unit is down, and we need to keep production running.

—> Purchase or Repair:
#John Deere by Ondracek on 2015-07-29 20:20
The issue affecting the John Deere RE46704 7AT2JD01 is that the Tach Display doesn't turn on when cold. This is impacting production and needs immediate attention to ensure smooth operations. Please prioritize this repair to avoid any further disruptions to the line.

—> Purchase or Repair:
#John Deere by CHIRPpdm on 2011-03-07 06:51
Dear Supervisor,I need urgent support regarding the John Deere RE66821 7AT6JD01 Analog Tachometer. It malfunctioned this morning at 730 am, causing downtime on the production line. Can you please provide immediate assistance or instructions on how to address this issue before the next shift begins?T…Purchase or Repair: Ticket Image...
Show More
#John Deere by Dag on 2015-02-23 11:47
The John Deere RE46704 7AT2JD01 experienced downtime due to the tach display not turning on when cold. To address this issue

—> Purchase or Repair:
#John Deere by Kohlbrenner Chris on 2013-08-11 11:35
I noticed the John Deere RE64583 7SUD5JD04 SCV Setup panel is displaying unusual behavior. It's not functioning as expected and seems to be acting erratically.

—> Purchase or Repair:
#John Deere by TINE on 2015-07-17 07:20
John Deere RE64583 7SUD5JD04 experienced downtime due to an issue with the SCV Setup Panel on . Need resolution before the next shift, appreciate a fast response.

—> Purchase or Repair:
#John Deere by V S yadav on 2015-07-28 08:20
Hello, I'm interested in the John Deere RE46704 7AT2JD01 part for a tach display. Could you please provide information on pricing and availability? I'm looking to source this unit quickly. Thank you.

—> Purchase or Repair:
#John Deere by Edge on 2025-05-20 18:29
Hello, my John Deere BCU AL165751 controller is malfunctioning. Looking for repairs ASAP. Any technicians available? Thank you.

—> Purchase or Repair:
#John Deere by adesh on 2013-06-12 23:59
The SCV Setup panel on the John Deere RE64583 7SUD5JD04 is malfunctioning, impacting the production line. Urgent repair service is needed to resolve this issue

—> Purchase or Repair:
#John Deere by rivera on 2013-08-05 23:32
Hello, I'm interested in purchasing the John Deere RE63440 7SUD4JD03 SCV Setup Panel. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#John Deere by Leslie on 2013-11-30 12:36
Hello, following up on my previous message regarding the John Deere RE64583 unit. It's still down. I urgently need assistance to resolve the issue. Please respond

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.