John Deere Service & Repair Forum

The SCV Setup panel on John Deere RE64583 7SUD5JD04 is malfunctioning, affecting the line. Urgently need repair service to address the issue and get production back on track.

—> Purchase or Repair: Ticket Image

— Posted by Jimmi on 2013-08-12

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by jackpot18 on 2013-02-08 03:18
Hello, I need repair info for John Deere RE63440 7SUD4JD03 SCV Setup Panel. It's not working and we need a replacement. Please advise. Thank you!

—> Purchase or Repair:
#John Deere by Mauro De Simone on 2014-04-04 22:29
The John Deere RE64583 7SUD3JD01 SCV Setup panel is not working in the shop.

—> Purchase or Repair:
#John Deere by brian egan on 2014-01-07 11:22
The John Deere RE64583 7SUD5JD04 is displaying ERROR CODE 305 - MOTOR CONTROL FAILURE. Equipment is currently down, urgent assistance needed.

—> Purchase or Repair:
#John Deere by Lou Pennacchia on 2018-08-19 00:00
Repair Inquiry for John Deere Greenstar ControllerDear Repair Shop,I am reaching out on behalf of my client who is experiencing an issue with their John Deere Greenstar Controller. The part number is not specified, but they are encountering functionality problems with the controller.Could you please…Purchase or Repair: Ticket Image...
Show More
#John Deere by msuya on 2015-02-14 05:13
Can the John Deere RE64583 7SUD5JD04 SCV Setup Panel be repaired or purchased? I am trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Ha on 2026-05-25 19:18
Request Service for John DeereModel/Part : Re173829 Baler Unit

—> Purchase or Repair:
#John Deere by CHIRPpdm on 2011-03-07 06:51
Dear Supervisor,I need urgent support regarding the John Deere RE66821 7AT6JD01 Analog Tachometer. It malfunctioned this morning at 730 am, causing downtime on the production line. Can you please provide immediate assistance or instructions on how to address this issue before the next shift begins?T…Purchase or Repair: Ticket Image...
Show More
#John Deere by Jacob Bergen on 2024-08-23 10:45
I have a John Deere RE219402 controller that is not functioning properly. The unit fails to power on and does not respond to any input commands. I have attempted to troubleshoot the issue by checking all connections and ensuring proper power supply, but the problem persists. Based on my assessment, …Purchase or Repair: Ticket Image...
Show More
#John Deere by Zac Cameron on 2014-12-20 19:44
Hello, I am interested in purchasing a John Deere RE64583 7SUD5JD04 motor control unit. I'm not entirely sure if this is the right model, but my team recommended asking you. Could you please provide information on pricing and availability? I'm aiming to source one quickly. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Hemal Shah on 2016-06-17 18:28
The John Deere RE172237 7VMU0JD01 Vehicle Monitor is failing to display critical data, causing delays and disruptions in our production line. Immediate repair service is urgently needed to prevent further downtime.

—> Purchase or Repair:
#John Deere by Nikolay Georgiev on 2015-07-17 21:20
The tachometer on John Deere RE49192 7THM2JD03 is not working.

—> Purchase or Repair:
#John Deere by Hopf on 2013-07-23 03:32
Please provide me with information on the availability of support or replacement parts for the John Deere RE64583 7SUD5JD04 SCV Setup panel. Thank you.

—> Purchase or Repair:
#John Deere by Suliman on 2015-03-09 12:13
Looking for repair for John Deere RE66265 digital tachometer. The unit is not displaying any readings and seems completely dead. Need assistance from a professional technician.

—> Purchase or Repair:
#John Deere by deepakshinde on 2013-04-30 15:33
I experienced downtime with the John Deere RE63440 7SUD4JD03 due to an issue with the SCV setup Panel. This occurred on . Need quick clarification before the next shift begins.

—> Purchase or Repair:
#John Deere by Muhammad khan Attari on 2015-03-09 06:13
The John Deere AT320355 AT320694 CAN Monitor Unit is not working as reported.

—> Purchase or Repair:
#John Deere by ATIF ALI on 2013-08-15 07:01
The SCV setup Panel on John Deere RE63440 7SUD4JD03 is malfunctioning, affecting the line's productivity. Urgent repair service is needed to resolve the issue

—> Purchase or Repair:
#John Deere by Richard Byrd on 2013-04-30 03:05
I'm experiencing an issue with the SCV setup panel on my John Deere RE64583 7SUD5JD04. Something seems to have stopped working, and I'm not sure what the exact problem is. Any guidance or assistance would be greatly appreciated.

—> Purchase or Repair:
#John Deere by Nathan Arnold on 2016-01-15 22:00
The John Deere RE172237 7VMU0JD01 Vehicle Monitor is failing to display critical information, causing delays in monitoring production processes. Immediate repair is needed to ensure optimal functioning of the production line.

—> Purchase or Repair:
#John Deere by rami on 2015-07-13 01:32
Equipment Down John Deere RE64583 7SUD3JD01Issue SCV Setup Panel not functioningSymptom Not responding to inputsPlease advise on possible error codes or alarms.

—> Purchase or Repair:
#John Deere by Swanepoel on 2011-04-11 19:20
The John Deere RE66821 7AT6JD01 analog tachometer unit is not working.

—> Purchase or Repair:
#John Deere by Ravikumar Jadhav on 2013-11-07 23:37
Unit John Deere RE64583 7SUD5JD04 experienced downtime due to a malfunction in the SCV Setup panel. The issue occurred at 1030 AM today, and we are currently awaiting an analysis to determine the cause. Please advise

—> Purchase or Repair:
#John Deere by Smicka on 2015-07-09 15:14
Could you please provide me with the pricing and availability for the John Deere RE64583 7SUD5JD04 SCV Setup Panel? I am looking to source one quickly. Thank you!

—> Purchase or Repair:
#John Deere by Leo McCarthy on 2015-08-11 04:20
Drive or board failure in John Deere AT320355 AT320694 CAN Monitor Unit. Action needed ASAP.

—> Purchase or Repair:
#John Deere by sergio garcia on 2019-08-23 21:44
: Our industrial oven has stopped working properly. It will turn on but won't heat up consistently and is fluctuating between high and low temperature ranges. This issue prevents us from completing our baking tasks efficiently, which significantly impacts production deadlines and quality control. Ba…Purchase or Repair: Ticket Image...
Show More
#John Deere by cotrus on 2015-07-13 10:20
Please follow up immediately regarding the John Deere AT320355 AT320694 CAN Monitor Unit. It is still not functioning, and we need a resolution as soon as possible.

—> Purchase or Repair:
#John Deere by Les Abend on 2015-08-08 05:20
Could you please provide repair information for a John Deere RE64583 7SUD5JD04 SCV Setup Panel? We need a replacement part urgently, but can't locate one. Your

—> Purchase or Repair:
#John Deere by Nick Oshana on 2015-02-28 04:07
The John Deere RE64583 is displaying an SCV Setup Panel error. Unable to engage or control SCVs. Equipment is down. Need assistance urgently.

—> Purchase or Repair:
#John Deere by Geagea on 2015-07-26 04:20
Issue with John Deere RE46704 7AT2JD01 - Tach Display doesn't come on when cold. Likely a failed drive or board.

—> Purchase or Repair:
#John Deere by rumanto on 2014-07-18 14:24
Hello, could you please provide repair info for a John Deere RE64583 7SUD3JD01 SCV Setup panel? It needs to be replaced, but we can't find one. Thank you!

—> Purchase or Repair:
#John Deere by Gauthier on 2015-07-11 20:32
The John Deere RE65483 7SUD5JD04 unit, described as the SCV Setup Panel, is not working according to the maintenance team.

—> Purchase or Repair:
#John Deere by Fabrizio Colucci on 2011-03-02 03:55
John Deere RE66821 7AT6JD01 unit tachometer malfunctioned, needs repair ASAP.

—> Purchase or Repair:
#John Deere by Thang on 2015-07-05 17:58
Hello, I am interested in the John Deere RE49192 7THM2JD03 Tachometer. Could you please let me know the pricing and availability? I am trying to source one quickly. Thank you.

—> Purchase or Repair:
#John Deere by Roslin on 2025-06-03 23:52
Can the John Deere RE551415 controller be repaired, or should it be replaced? I'm trying to get this fixed or replaced to check it off my to-do list. Thank you.

—> Purchase or Repair:
#John Deere by Goecker on 2014-11-21 21:12
Looking for repair services for my John Deere RE43902 7MRT2JD02 controller. The unit is failing to power up properly and needs immediate attention. Thank you.

—> Purchase or Repair:
#John Deere by Ha on 2026-05-25 19:18
Request Service for John DeereModel/Part : Re173829 Baler Unit

—> Purchase or Repair:
#John Deere by colvin on 2016-09-06 08:36
Hello, I'm interested in purchasing a John Deere RE69212 7TCU5JD01 Controller. I'm not 100% certain if this is the right model, but my team recommended reaching out to inquire. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Pennington on 2015-07-09 18:21
Can the John Deere RE49192 Tachometer be repaired or purchased? I'm looking to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Martin Connor on 2015-07-30 07:20
I need assistance with my John Deere RE65483 7SUD5JD04 for the SCV Setup Panel. This unit caused downtime and I should report it as a shift supervisor. I need a quick answer regarding what happened and when before the next shift starts.

—> Purchase or Repair:
#John Deere by Kelly B Adams on 2015-07-27 09:20
The John Deere RE65483 7SUD5JD04 unit is related to the SCV Setup Panel and is currently not functioning as expected. That's the information I have at the moment.

—> Purchase or Repair:
#John Deere by Shaliah AM on 2015-07-12 03:32
The issue with the John Deere RE46704 7AT2JD01 is that the Tach Display fails to come on when cold. This is affecting the production line as it hinders visibility and monitoring. Immediate attention is required to resolve this issue

—> Purchase or Repair:
#John Deere by terry mcfarlain on 2013-07-16 16:44
Please send maintenance team to check on John Deere RE64583 7SUD5JD04 SCV Setup panel as it is not functioning correctly. Thank you.

—> Purchase or Repair:
#John Deere by annmarie on 2014-11-01 01:57
Are you able to repair the John Deere RE64583 7SUD5JD04 motor control unit, or do you have a replacement available for sale? It's urgent to keep production running.

—> Purchase or Repair:
#John Deere by Chidester on 2015-08-08 01:20
The John Deere RE49192 7THM2JD03 Tachometer is not functioning as expected.

—> Purchase or Repair:
#John Deere by Al Schrock on 2013-05-25 15:24
Our John Deere RE64583 7SUD5JD04 is still down. Please provide assistance and get back to me as soon as possible. Thank you.

—> Purchase or Repair:
#John Deere by Mike Martinelli on 2014-12-25 11:06
John Deere RE43902 7MRT2JD02 is down. Issue with the controller. Check and fix during the day.

—> Purchase or Repair:
#John Deere by Amanda Waters on 2013-07-06 00:09
The John Deere RE63440 7SUD4JD03 SCV setup panel is not functioning as expected. It seems to be acting unusual and not performing its usual functions.

—> Purchase or Repair:
#John Deere by Nadler on 2015-07-17 23:20
Please advise if the John Deere RE64583 7SUD5JD04 SCV Setup Panel is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#John Deere by Ghanshyam on 2015-08-01 17:20
The John Deere RE66265 7MRT8JDO1E digital tachometer is displaying abnormal behavior. It is not functioning as it typically does.

—> Purchase or Repair:
#John Deere by Wuolewu on 2014-05-07 00:20
Equipment down due to error code 7SUD3JD01 displayed on John Deere RE64583 SCV Setup panel. Unable to operate machine. Need urgent assistance to troubleshoot and resolve issue.

—> Purchase or Repair:
#John Deere by Anand Palkar on 2014-12-19 05:44
Hi, our John Deere RE43902 7MRT2JD02 is down and displaying error code E102. Need urgent assistance to diagnose and fix the issue. Please advise on next steps. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.