John Deere Service & Repair Forum

John Deere RE63440 7SUD4JD03 SCV setup Panel unit went down mid-shift. Needs attention ASAP.

—> Purchase or Repair: Ticket Image

— Posted by Su on 2013-12-12

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by IVAN PUCH MEX on 2013-08-13 04:35
My John Deere Bale Trak Plus RE159944 isn't displaying any data or responding. Looking for a technician who can troubleshoot and repair it

—> Purchase or Repair:
#John Deere by annmarie on 2014-11-01 01:57
Are you able to repair the John Deere RE64583 7SUD5JD04 motor control unit, or do you have a replacement available for sale? It's urgent to keep production running.

—> Purchase or Repair:
#John Deere by Derek Baker on 2016-03-23 17:19
John Deere 120974T AT167497 Monitor is malfunctioning, impacting production line efficiency. Urgent repair needed to resume operations

—> Purchase or Repair:
#John Deere by FARHAT on 2013-04-12 00:15
Hello, I am inquiring about the John Deere RE64583 7SUD5JD04 SCV Setup panel. Is this unit still supported, and are replacement parts available for it? Thank you.

—> Purchase or Repair:
#John Deere by Ansarudi on 2014-12-15 19:44
Please provide an update on our John Deere RE64583 7SUD3JD01 with the SCV Setup panel. The unit is still down. We need assistance urgently.

—> Purchase or Repair:
#John Deere by darren kotzur on 2011-06-07 19:38
Can the John Deere RE66821 7AT6JD01 Analog Tachometer be repaired or purchased to resolve the issue? Checking this off my to-do list.

—> Purchase or Repair:
#John Deere by Ravikumar Jadhav on 2013-11-07 23:37
Unit John Deere RE64583 7SUD5JD04 experienced downtime due to a malfunction in the SCV Setup panel. The issue occurred at 1030 AM today, and we are currently awaiting an analysis to determine the cause. Please advise

—> Purchase or Repair:
#John Deere by Nick Oshana on 2015-02-28 04:07
The John Deere RE64583 is displaying an SCV Setup Panel error. Unable to engage or control SCVs. Equipment is down. Need assistance urgently.

—> Purchase or Repair:
#John Deere by TOO on 2013-07-01 14:47
The John Deere RE64583 SCV Setup panel unit is displaying unusual behavior. The panel is not functioning as expected and is acting strangely.

—> Purchase or Repair:
#John Deere by LEE SANG HUN on 2015-07-29 15:20
It seems like the Tach Display on your John Deere RE46704 7AT2JD01 may have an issue since it doesn't come on when cold. It would be best to consult a technician to diagnose the problem accurately.

—> Purchase or Repair:
#John Deere by Baleras on 2015-07-07 15:32
Can the SCV Setup Panel for the John Deere RE65483 7SUD5JD04 be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Eric Mildebrath on 2015-01-08 13:41
Hello, I am interested in purchasing the John Deere AT320355 AT320694 CAN Monitor Unit. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#John Deere by Jakubowski on 2010-09-15 08:35
The John Deere Motorola RE64583 is displaying error code E342, indicating a communication issue with the engine control module. The equipment is currently non-operational, and a technician is needed for immediate assistance.

—> Purchase or Repair:
#John Deere by steven schmit on 2013-05-02 02:50
The John Deere Bale Trak Plus RE159944 is displaying error code E001. The bale monitor is not detecting any bales although they are passing through. Need urgent assistance to troubleshoot and resolve this issue. Thank you.

—> Purchase or Repair:
#John Deere by Dorothy on 2015-08-14 01:20
Unit RE65483 7SUD5JD04 is down due to SCV Setup Panel issue. Please check and fix it during the day shift. Thank you!

—> Purchase or Repair:
#John Deere by stephen spaner on 2015-07-25 02:20
The John Deere RE65483 7SUD5JD04 is not functioning properly, acting in an unusual way. Please provide more details so we can better assist you.

—> Purchase or Repair:
#John Deere by Arain on 2015-07-07 21:32
I have a John Deere RE49192 7THM2JD03 Tachometer that's not working and needs repair. Looking for a technician who can troubleshoot and fix the issue

—> Purchase or Repair:
#John Deere by Mutha on 2013-05-17 11:54
Could you please confirm if the John Deere RE63440 7SUD4JD03 SCV setup Panel is still supported or if replacement parts are available? Thank you!

—> Purchase or Repair:
#John Deere by Zavir on 2014-11-21 13:12
Could you please confirm if the John Deere RE64583 7SUD5JD04 motor control unit is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#John Deere by AVELLANEDA on 2015-07-05 21:58
The John Deere RE49192 Tachometer is not working.

—> Purchase or Repair:
#John Deere by Ghanshyam on 2015-08-01 17:20
The John Deere RE66265 7MRT8JDO1E digital tachometer is displaying abnormal behavior. It is not functioning as it typically does.

—> Purchase or Repair:
#John Deere by cotrus on 2015-07-13 10:20
Please follow up immediately regarding the John Deere AT320355 AT320694 CAN Monitor Unit. It is still not functioning, and we need a resolution as soon as possible.

—> Purchase or Repair:
#John Deere by rami on 2015-07-13 01:32
Equipment Down John Deere RE64583 7SUD3JD01Issue SCV Setup Panel not functioningSymptom Not responding to inputsPlease advise on possible error codes or alarms.

—> Purchase or Repair:
#John Deere by Mark W Griffin on 2013-02-19 03:27
Do you have a replacement John Deere RE64583 SCV Setup panel available for purchase or repair? Production has been interrupted, and we need to keep things running smoothly.

—> Purchase or Repair:
#John Deere by Jimmy Ng on 2015-08-12 20:20
Hello, do you have a John Deere RE64583 7SUD3JD01 SCV Setup Panel available for sale or repair? Our production is currently down, and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#John Deere by Haldor on 2013-11-16 23:30
The John Deere Bale Trak Plus RE159944 is not functioning properly and needs maintenance.

—> Purchase or Repair:
#John Deere by Hemal Shah on 2016-06-17 18:28
The John Deere RE172237 7VMU0JD01 Vehicle Monitor is failing to display critical data, causing delays and disruptions in our production line. Immediate repair service is urgently needed to prevent further downtime.

—> Purchase or Repair:
#John Deere by Roiger on 2015-01-09 04:41
Can the John Deere RE65483 7SUD5JD04 SCV Setup Panel be repaired or replaced? Just trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by TT on 2014-04-03 16:29
The John Deere RE43902 7MRT2JD02 Controller is malfunctioning, causing a halt in production. Urgent repair is needed to get the line running smoothly again.

—> Purchase or Repair:
#John Deere by Al Schrock on 2013-08-13 10:35
Could you please confirm if the John Deere RE64583 7SUD5JD04 SCV setup panel is still supported and if replacement parts are available? Your

—> Purchase or Repair:
#John Deere by runyan on 2010-09-09 19:51
The digital display on the John Deere Motorola RE64583 is malfunctioning, disrupting the production line. Urgent repair is required to restore operations

—> Purchase or Repair:
#John Deere by Eckmann on 2016-12-13 01:59
The John Deere RE172237 7VMU0JD01 Vehicle Monitor unit is not working.

—> Purchase or Repair:
#John Deere by Edge on 2025-05-20 18:29
Hello, my John Deere BCU AL165751 controller is malfunctioning. Looking for repairs ASAP. Any technicians available? Thank you.

—> Purchase or Repair:
#John Deere by nguyen kim son on 2015-08-11 16:20
Could you please provide information on the John Deere parts AT320355 and AT320694? They are CAN Monitor Units requiring some service. Thank you.

—> Purchase or Repair:
#John Deere by Leonardo Jose Fueyo on 2015-07-30 01:20
Can you please assist in checking whether the John Deere AT320355 AT320694 CAN Monitor Unit is still supported or if replacement parts are available? It's an older unit, and we are unsure about its manufacturer. Thank you.

—> Purchase or Repair:
#John Deere by p.srinivasu on 2015-07-29 10:20
Can you please provide information on whether the John Deere AT320355 AT320694 CAN Monitor Unit is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#John Deere by Andy Vigar on 2025-05-29 15:12
Hello, I wanted to inform you that the John Deere SE502802 controller unit malfunctioned today during the morning shift, resulting in unplanned downtime. Can you please provide me with an update on the issue before the next shift begins? Thank you.

—> Purchase or Repair:
#John Deere by Derrick Taylor on 2014-12-24 12:06
I'm sorry to hear that your John Deere RE43902 7MRT2JD02 controller is no longer functioning properly. It seems like there might be an issue with its operation. I recommend reaching out to a technician for a closer look and assessment.

—> Purchase or Repair:
#John Deere by Len Minor on 2013-04-10 20:34
John Deere Bale Trak Plus RE159944 board/drive failure on Bale Monitor. Needs immediate attention to restore functionality.

—> Purchase or Repair:
#John Deere by TFI on 2015-03-16 06:25
Hello, we're in need of repair information for a John Deere AT320355 AT320694. It's a CAN Monitor Unit that stopped working. Can you please provide the details as soon as possible? Thank you.

—> Purchase or Repair:
#John Deere by Matt on 2013-08-18 17:32
Hello, I wanted to inquire about the pricing and availability of the John Deere Bale Trak Plus RE159944. I'm looking to source one quickly and would appreciate any assistance you can provide. Thank you.

—> Purchase or Repair:
#John Deere by Al Schrock on 2013-05-25 15:24
Our John Deere RE64583 7SUD5JD04 is still down. Please provide assistance and get back to me as soon as possible. Thank you.

—> Purchase or Repair:
#John Deere by Kelly B Adams on 2015-07-27 09:20
The John Deere RE65483 7SUD5JD04 unit is related to the SCV Setup Panel and is currently not functioning as expected. That's the information I have at the moment.

—> Purchase or Repair:
#John Deere by terry mcfarlain on 2013-07-16 16:44
Please send maintenance team to check on John Deere RE64583 7SUD5JD04 SCV Setup panel as it is not functioning correctly. Thank you.

—> Purchase or Repair:
#John Deere by Chris Norwood on 2013-08-07 09:32
Hello, I hope this message finds you well. I am interested in purchasing the John Deere RE64583 7SUD5JD04 SCV Setup panel. Could you please provide information on pricing and availability? I am looking to source one quickly and would appreciate any assistance you can offer. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by adesh on 2013-06-12 23:59
The SCV Setup panel on the John Deere RE64583 7SUD5JD04 is malfunctioning, impacting the production line. Urgent repair service is needed to resolve this issue

—> Purchase or Repair:
#John Deere by Neill on 2013-08-03 03:32
The John Deere RE64583 7SUD5JD04 SCV setup panel seems to be experiencing unusual behavior in the warehouse. It is not functioning as it normally does, displaying strange actions that are out of the ordinary.

—> Purchase or Repair:
#John Deere by Tri on 2016-01-21 01:13
John Deere RE64583 7SUD5JD04 issue SCV Setup Panel malfunctioned mid-shift. Need attention ASAP.

—> Purchase or Repair:
#John Deere by Arturo Arriaga Solorio on 2013-04-16 10:25
I've noticed that the SCV Setup panel on your John Deere RE64583 7SUD5JD04 is not functioning properly. It seems like something might have stopped working correctly. I recommend reaching out to a technician or consulting the user manual for troubleshooting guidance.

—> Purchase or Repair:
#John Deere by Mahesh Menon on 2013-12-25 12:17
Looking for repair services for a malfunctioning John Deere RE64583 unit. Issue SCV Setup panel not functioning correctly. Seeking immediate assistance to get this industrial unit back in operation.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.