John Deere Service & Repair Forum

I would like to inquire about the availability of support or replacement parts for the John Deere RE64583 7SUD5JD04 motor control unit.

—> Purchase or Repair: Ticket Image

— Posted by Eli on 2014-12-04

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by Torsten on 2013-08-17 12:01
The John Deere Bale Trak Plus RE159944 is down. Need to check and fix it before day shift.

—> Purchase or Repair:
#John Deere by Al Schrock on 2013-08-13 10:35
Could you please confirm if the John Deere RE64583 7SUD5JD04 SCV setup panel is still supported and if replacement parts are available? Your

—> Purchase or Repair:
#John Deere by fatih on 2016-02-18 12:03
We experienced downtime on the John Deere RE66264 7MRT6JD01 Digital Tachometer unit earlier today at 230 PM. Need to investigate the cause

—> Purchase or Repair:
#John Deere by jackpot18 on 2013-02-08 03:18
Hello, I need repair info for John Deere RE63440 7SUD4JD03 SCV Setup Panel. It's not working and we need a replacement. Please advise. Thank you!

—> Purchase or Repair:
#John Deere by Kohlbrenner Chris on 2013-08-11 11:35
I noticed the John Deere RE64583 7SUD5JD04 SCV Setup panel is displaying unusual behavior. It's not functioning as expected and seems to be acting erratically.

—> Purchase or Repair:
#John Deere by bayo on 2015-08-14 07:20
John Deere RE66265 7MRT8JDO1E Digital Tachometer not displaying any readings.

—> Purchase or Repair:
#John Deere by LEE SANG HUN on 2015-07-29 15:20
It seems like the Tach Display on your John Deere RE46704 7AT2JD01 may have an issue since it doesn't come on when cold. It would be best to consult a technician to diagnose the problem accurately.

—> Purchase or Repair:
#John Deere by Thomas wood on 2015-03-26 11:20
The John Deere RE66265 Digital Tachometer is not working.

—> Purchase or Repair:
#John Deere by THOMAS WHITE on 2015-01-07 08:41
The John Deere RE64583 7SUD5JD04 experienced downtime due to an issue with the SCV Setup Panel. The incident occurred earlier this shift, and I am seeking a quick answer before the next shift begins. Thank you for your

—> Purchase or Repair:
#John Deere by wiebe on 2015-02-07 01:52
Could you please confirm if the John Deere RE64583 7SUD5JD04 SCV Setup Panel is still supported, and if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#John Deere by Caps on 2016-11-22 14:01
Drive or board failure on John Deere RE66264 7MRT6JD01 digital tachometer. Need to troubleshoot and replace to get it back up and running.

—> Purchase or Repair:
#John Deere by Robert Price on 2013-06-27 17:23
Can the John Deere RE63440 7SUD4JD03 SCV setup Panel be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Fernandez on 2011-02-19 08:42
The John Deere RE66821 7AT6JD01 Analog Tachometer unit is displaying erratic behavior. It is not functioning as it normally does and requires further inspection to determine the issue.

—> Purchase or Repair:
#John Deere by John Demers on 2015-08-04 07:20
Hello, I'm inquiring about an issue with part number RE46704 7AT2JD01. The tach display doesn't come on when cold. Can you please provide information on troubleshooting and potential solutions? Thank you.

—> Purchase or Repair:
#John Deere by Ken Jenkins on 2013-08-15 13:01
I encountered an issue with the John Deere RE64583 7SUD5JD04 related to the SCV Setup panel causing downtime. Please provide details on the incident and when it occurred to help resolve the problem

—> Purchase or Repair:
#John Deere by TINE on 2015-07-17 07:20
John Deere RE64583 7SUD5JD04 experienced downtime due to an issue with the SCV Setup Panel on . Need resolution before the next shift, appreciate a fast response.

—> Purchase or Repair:
#John Deere by MackMillions on 2013-08-18 15:32
The display on the John Deere Bale Trak Plus RE159944 Bale Monitor is flickering erratically, making it difficult to accurately monitor bale production. This issue needs immediate attention to prevent disruptions to the production line.

—> Purchase or Repair:
#John Deere by balli aulakh on 2015-08-05 18:20
The unit with part numbers AT320355 and AT320694, which is the CAN Monitor Unit, is behaving abnormally. It is not functioning as it normally does and appears to be acting strangely.

—> Purchase or Repair:
#John Deere by Dan Arrington on 2014-10-31 23:57
Hi there, could you please provide repair info for a John Deere RE64583 7SUD5JD04 motor control? It stopped working and we need to find a replacement. Thanks!

—> Purchase or Repair:
#John Deere by Frank Taylor on 2015-07-17 09:20
I'm currently experiencing some issues with the SCV Setup Panel on my John Deere RE65483 7SUD5JD04. Something seems to have stopped working and I'm not sure how to fix it. Your assistance in resolving this matter would be greatly appreciated.

—> Purchase or Repair:
#John Deere by Gauthier on 2015-07-11 20:32
The John Deere RE65483 7SUD5JD04 unit, described as the SCV Setup Panel, is not working according to the maintenance team.

—> Purchase or Repair:
#John Deere by Pat Rumsey on 2014-12-22 03:44
The John Deere RE64583 7SUD3JD01 SCV Setup panel is not working.

—> Purchase or Repair:
#John Deere by Mat Eicher on 2011-06-23 15:36
Can the John Deere RE66821 7AT6JD01 Analog Tachometer be repaired or replaced? I'm looking to check this off my to-do list.

—> Purchase or Repair:
#John Deere by perea on 2015-02-22 19:47
Do you have a John Deere RE64583 7SUD3JD01 SCV Setup Panel available for purchase or repair? Need it urgently to keep production running smoothly.

—> Purchase or Repair:
#John Deere by Nathan Yehirai on 2015-02-23 10:47
The SCV Setup Panel on my John Deere RE64583 7SUD3JD01 is displaying an error message and is not responding to input commands.

—> Purchase or Repair:
#John Deere by ClainiMib on 2014-12-17 12:44
The SCV Setup panel on the John Deere RE64583 7SUD3JD01 is malfunctioning, causing delays in our production line. We need urgent repair services to address this issue and resume operations

—> Purchase or Repair:
#John Deere by Kohloff on 2013-08-07 08:32
John Deere RE63440 7SUD4JD03 is experiencing issues with the SCV setup Panel, causing a slowdown in production. Please address this urgently to minimize downtime.

—> Purchase or Repair:
#John Deere by Hohmann on 2013-07-27 21:32
I need assistance with the John Deere RE64583 7SUD5JD04 SCV Setup panel unit. It's not functioning properly.

—> Purchase or Repair:
#John Deere by TOO on 2013-07-01 14:47
The John Deere RE64583 SCV Setup panel unit is displaying unusual behavior. The panel is not functioning as expected and is acting strangely.

—> Purchase or Repair:
#John Deere by djabeur on 2015-07-28 19:20
Looking for repair assistance with a John Deere RE64583 SCV Setup Panel unit that isn't functioning properly. Need a qualified technician to diagnose and fix the issue

—> Purchase or Repair:
#John Deere by Michael Read on 2011-02-13 01:59
The John Deere RE66821 7AT6JD01 analog tachometer unit is not working. Please check and repair during the day shift.

—> Purchase or Repair:
#John Deere by Swanepoel on 2011-04-11 19:20
The John Deere RE66821 7AT6JD01 analog tachometer unit is not working.

—> Purchase or Repair:
#John Deere by Johns on 2013-08-13 15:32
Hi there, we're needing repair info for a John Deere Bale Trak Plus RE159944 Bale Monitor. Can you help us out quickly? Thanks!

—> Purchase or Repair:
#John Deere by LEPOINT on 2013-03-16 14:15
I have a John Deere Bale Trak Plus RE159944 that is not displaying any information on the monitor. Looking for a repair specialist who can troubleshoot and fix the issue

—> Purchase or Repair:
#John Deere by Jerry Jos on 2014-12-15 09:44
Hello, I'm interested in purchasing the John Deere RE64583 7SUD3JD01 SCV Setup panel. Could you please provide me with information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#John Deere by Geagea on 2015-07-26 04:20
Issue with John Deere RE46704 7AT2JD01 - Tach Display doesn't come on when cold. Likely a failed drive or board.

—> Purchase or Repair:
#John Deere by gonzalo on 2014-05-03 11:20
John Deere RE64583 SCV Setup panel issue - drive or board failure. Investigating now, update coming shortly.

—> Purchase or Repair:
#John Deere by Kendra on 2014-07-29 05:24
RE43902 7MRT2JD02 showing error code 2143 Controller malfunction. Governor signal not received.

—> Purchase or Repair:
#John Deere by Smicka on 2015-07-09 15:14
Could you please provide me with the pricing and availability for the John Deere RE64583 7SUD5JD04 SCV Setup Panel? I am looking to source one quickly. Thank you!

—> Purchase or Repair:
#John Deere by Mutha on 2013-05-17 11:54
Could you please confirm if the John Deere RE63440 7SUD4JD03 SCV setup Panel is still supported or if replacement parts are available? Thank you!

—> Purchase or Repair:
#John Deere by Gary Denemark on 2015-07-28 14:20
Hello, we have a John Deere part AT320355 AT320694, the CAN Monitor Unit, that needs repair but we can't find a replacement. Please provide repair information or options as soon as possible. Thank you.

—> Purchase or Repair:
#John Deere by Josip on 2015-08-08 08:20
The John Deere AT320355 AT320694 CAN Monitor Unit malfunctioned yesterday during the night shift, causing unexpected downtime. Can you quickly provide an update on what went wrong and when it started? It's important to address this before the next shift begins.

—> Purchase or Repair:
#John Deere by Damien on 2013-07-24 09:32
The John Deere RE63440 7SUD4JD03 SCV setup Panel experienced a malfunction causing downtime on . Seeking quick resolution before the next shift, please advise on the issue. Thank you.

—> Purchase or Repair:
#John Deere by Les Abend on 2015-08-08 05:20
Could you please provide repair information for a John Deere RE64583 7SUD5JD04 SCV Setup Panel? We need a replacement part urgently, but can't locate one. Your

—> Purchase or Repair:
#John Deere by rami on 2015-07-13 01:32
Equipment Down John Deere RE64583 7SUD3JD01Issue SCV Setup Panel not functioningSymptom Not responding to inputsPlease advise on possible error codes or alarms.

—> Purchase or Repair:
#John Deere by Strohmenger on 2015-08-04 13:19
The digital tachometer on the John Deere RE66265 7MRT8JDO1E is malfunctioning, affecting the production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#John Deere by FARHAT on 2013-04-12 00:15
Hello, I am inquiring about the John Deere RE64583 7SUD5JD04 SCV Setup panel. Is this unit still supported, and are replacement parts available for it? Thank you.

—> Purchase or Repair:
#John Deere by Chris Norwood on 2013-08-07 09:32
Hello, I hope this message finds you well. I am interested in purchasing the John Deere RE64583 7SUD5JD04 SCV Setup panel. Could you please provide information on pricing and availability? I am looking to source one quickly and would appreciate any assistance you can offer. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Steve Block on 2015-07-16 10:20
Hello, I am inquiring about the John Deere RE66265 7MRT8JDO1E Digital Tachometer. Our team is looking for information on whether this unit is still supported and if replacement parts are available. Could you please provide us with information regarding the current status of this model? Thank you. —>…Purchase or Repair: Ticket Image...
Show More
#John Deere by Stan Novak on 2015-04-23 20:05
Can the John Deere RE65483 7SUD5JD04 SCV Setup Panel be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.