John Deere Service & Repair Forum

The CAN Monitor Unit on the John Deere AT320355 AT320694 is malfunctioning, causing a disruption in the production line. Immediate attention is needed to resolve this issue efficiently and resume operations swiftly.

—> Purchase or Repair: Ticket Image

— Posted by tuan truong on 2015-01-12

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by Dorothy on 2015-08-14 01:20
Unit RE65483 7SUD5JD04 is down due to SCV Setup Panel issue. Please check and fix it during the day shift. Thank you!

—> Purchase or Repair:
#John Deere by Fracassi Roberto on 2013-08-03 20:32
Equipment down due to error code SCV Setup panel on John Deere RE64583 7SUD5JD04. Need urgent assistance to troubleshoot and rectify.

—> Purchase or Repair:
#John Deere by syarif hidayat on 2013-08-13 13:35
The John Deere Bale Trak Plus RE159944 is failing to display accurate bale counts and is not registering bale sizes correctly. This issue is affecting the production line efficiency and needs immediate attention to prevent further delays.

—> Purchase or Repair:
#John Deere by REALI on 2015-08-06 21:20
The John Deere RE64583 7SUD3JD01 SCV Setup Panel is displaying abnormal behavior in the warehouse.

—> Purchase or Repair:
#John Deere by Wisnu R Maulana on 2015-03-10 05:13
Please provide an update on the status of my John Deere RE66265 7MRT8JDO1E Digital Tachometer. This issue needs

—> Purchase or Repair:
#John Deere by Johns on 2013-08-13 15:32
Hi there, we're needing repair info for a John Deere Bale Trak Plus RE159944 Bale Monitor. Can you help us out quickly? Thanks!

—> Purchase or Repair:
#John Deere by Caps on 2016-11-22 14:01
Drive or board failure on John Deere RE66264 7MRT6JD01 digital tachometer. Need to troubleshoot and replace to get it back up and running.

—> Purchase or Repair:
#John Deere by Steve Block on 2015-07-16 10:20
Hello, I am inquiring about the John Deere RE66265 7MRT8JDO1E Digital Tachometer. Our team is looking for information on whether this unit is still supported and if replacement parts are available. Could you please provide us with information regarding the current status of this model? Thank you. —>…Purchase or Repair: Ticket Image...
Show More
#John Deere by Mark W Griffin on 2013-02-19 03:27
Do you have a replacement John Deere RE64583 SCV Setup panel available for purchase or repair? Production has been interrupted, and we need to keep things running smoothly.

—> Purchase or Repair:
#John Deere by annmarie on 2014-11-01 01:57
Are you able to repair the John Deere RE64583 7SUD5JD04 motor control unit, or do you have a replacement available for sale? It's urgent to keep production running.

—> Purchase or Repair:
#John Deere by Roslin on 2025-06-03 23:52
Can the John Deere RE551415 controller be repaired, or should it be replaced? I'm trying to get this fixed or replaced to check it off my to-do list. Thank you.

—> Purchase or Repair:
#John Deere by Naranjo on 2013-01-15 12:27
Please ensure someone attends to the John Deere RE64583 7SUD5JD04 SCV setup panel issue

—> Purchase or Repair:
#John Deere by TREJO on 2010-01-31 21:46
Do you have a John Deere Motorola RE64583 Digital Display available for sale or repair? The unit went down and production needs to keep running.

—> Purchase or Repair:
#John Deere by ian pierce on 2005-02-02 00:00
Hello, I am reaching out on behalf of my client regarding an issue with part number RE64583 7SUD3JD01 on their John Deere equipment. The problem seems to involve the SCV Setup panel. Can you please provide more information or guidance on how to address this issue? Thank you.

—> Purchase or Repair:
#John Deere by Mike Ferrell on 2015-07-26 00:20
I need assistance with John Deere part number RE49192 7THM2JD03, which is a Tachometer. My client is having issues with this part. Can you provide me with more information or an estimate for repair/replacement? Thank you.

—> Purchase or Repair:
#John Deere by hejl on 2011-08-15 22:09
Could you please provide details on troubleshooting and repairing a John Deere RE66821 7AT6JD01 Analog Tachometer? My client is experiencing issues with it. Thank you.

—> Purchase or Repair:
#John Deere by BRIAN STIGLIC on 2013-04-06 01:57
Do you have a John Deere RE63440 7SUD4JD03 SCV setup Panel available for sale or repair? Production is currently down and we need to get it up and running as soon as possible. Thank you.

—> Purchase or Repair:
#John Deere by varghese on 2014-09-04 10:02
The John Deere RE64583 7SUD5JD04 motor control unit is not working.

—> Purchase or Repair:
#John Deere by mixon on 2014-12-22 11:44
Can the John Deere RE64583 7SUD5JD04 motor control be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Mon Torres on 2015-02-17 20:24
I need assistance with my John Deere AT320355 AT320694, which is a CAN Monitor Unit. It's an older unit, and we're unsure of the manufacturer. Can you please confirm if it's still supported or if replacement parts are available?

—> Purchase or Repair:
#John Deere by Chris Norwood on 2013-08-07 09:32
Hello, I hope this message finds you well. I am interested in purchasing the John Deere RE64583 7SUD5JD04 SCV Setup panel. Could you please provide information on pricing and availability? I am looking to source one quickly and would appreciate any assistance you can offer. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Nakata on 2013-10-30 18:58
I need an update on the John Deere RE64583 7SUD5JD04 SCV setup panel. The unit is still down. Please provide assistance immediately.

—> Purchase or Repair:
#John Deere by jianxin on 2013-07-17 10:55
Hello, I'm interested in purchasing the John Deere RE63440 7SUD4JD03 SCV setup Panel. Could you provide information about pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#John Deere by Preston on 2015-09-30 01:00
The tach display on the John Deere RE46704 7AT2JD01 is not functioning when cold. This issue needs urgent attention to avoid disruptions to production. Please address the failing tach display

—> Purchase or Repair:
#John Deere by balli aulakh on 2015-08-05 18:20
The unit with part numbers AT320355 and AT320694, which is the CAN Monitor Unit, is behaving abnormally. It is not functioning as it normally does and appears to be acting strangely.

—> Purchase or Repair:
#John Deere by Mutha on 2013-05-17 11:54
Could you please confirm if the John Deere RE63440 7SUD4JD03 SCV setup Panel is still supported or if replacement parts are available? Thank you!

—> Purchase or Repair:
#John Deere by fatih on 2016-02-18 12:03
We experienced downtime on the John Deere RE66264 7MRT6JD01 Digital Tachometer unit earlier today at 230 PM. Need to investigate the cause

—> Purchase or Repair:
#John Deere by Derrick Taylor on 2014-12-24 12:06
I'm sorry to hear that your John Deere RE43902 7MRT2JD02 controller is no longer functioning properly. It seems like there might be an issue with its operation. I recommend reaching out to a technician for a closer look and assessment.

—> Purchase or Repair:
#John Deere by Dave Lorenzo on 2013-02-27 10:47
Looking for repair help for my John Deere RE64583 7SUD5JD04 SCV Setup panel. The unit is not responding to inputs, causing operational issues. Need immediate assistance.

—> Purchase or Repair:
#John Deere by Mat Eicher on 2011-06-23 15:36
Can the John Deere RE66821 7AT6JD01 Analog Tachometer be repaired or replaced? I'm looking to check this off my to-do list.

—> Purchase or Repair:
#John Deere by bayo on 2015-08-14 07:20
John Deere RE66265 7MRT8JDO1E Digital Tachometer not displaying any readings.

—> Purchase or Repair:
#John Deere by DARLENE CARTER on 2013-09-12 07:28
I need repair info for a John Deere RE64583 SCV Setup panel. Can you assist with this inquiry? Thank you.

—> Purchase or Repair:
#John Deere by Pennington on 2015-07-09 18:21
Can the John Deere RE49192 Tachometer be repaired or purchased? I'm looking to check this off my to-do list.

—> Purchase or Repair:
#John Deere by nguyen kim son on 2015-08-11 16:20
Could you please provide information on the John Deere parts AT320355 and AT320694? They are CAN Monitor Units requiring some service. Thank you.

—> Purchase or Repair:
#John Deere by Ferguson on 2013-02-10 16:39
The John Deere RE63440 7SUD4JD03 is the SCV setup Panel, but I am still learning about its function. I will pass along this information to the maintenance team for further assessment.

—> Purchase or Repair:
#John Deere by FRED WALTHALL on 2016-03-19 18:03
Can the John Deere RE172237 7VMU0JD01 Vehicle Monitor be repaired or replaced? Trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#John Deere by Jerry Fields on 2013-08-19 06:32
SCV Setup panel on John Deere RE64583 7SUD5JD04 is malfunctioning, halting the production line. Urgent repair service required to restore operation immediately.

—> Purchase or Repair:
#John Deere by Mathias on 2013-07-26 02:32
John Deere RE63440 7SUD4JD03 SCV setup Panel down mid-shift. Please check it out in the morning.

—> Purchase or Repair:
#John Deere by perea on 2015-02-22 19:47
Do you have a John Deere RE64583 7SUD3JD01 SCV Setup Panel available for purchase or repair? Need it urgently to keep production running smoothly.

—> Purchase or Repair:
#John Deere by Stan Novak on 2015-04-23 20:05
Can the John Deere RE65483 7SUD5JD04 SCV Setup Panel be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Mahesh Menon on 2013-12-25 12:17
Looking for repair services for a malfunctioning John Deere RE64583 unit. Issue SCV Setup panel not functioning correctly. Seeking immediate assistance to get this industrial unit back in operation.

—> Purchase or Repair:
#John Deere by Aguiniga on 2016-02-29 12:47
John Deere RE64583 7SUD5JD04 - SCV Setup Panel failure alert during rounds. Investigating drive or board issue now.

—> Purchase or Repair:
#John Deere by wargin on 2015-08-13 10:20
Equipment down with John Deere RE66265 Digital Tachometer displaying error code E003. Need immediate assistance to troubleshoot and resolve issue.

—> Purchase or Repair:
#John Deere by Leslie on 2013-11-30 12:36
Hello, following up on my previous message regarding the John Deere RE64583 unit. It's still down. I urgently need assistance to resolve the issue. Please respond

—> Purchase or Repair:
#John Deere by Ondracek on 2015-07-29 20:20
The issue affecting the John Deere RE46704 7AT2JD01 is that the Tach Display doesn't turn on when cold. This is impacting production and needs immediate attention to ensure smooth operations. Please prioritize this repair to avoid any further disruptions to the line.

—> Purchase or Repair:
#John Deere by Torp on 2015-01-10 05:41
I understand that the CAN Monitor Unit in your John Deere AT320355 AT320694 is not functioning properly. The exact issue with the machine is unclear, but we will do our best to assist you and resolve the problem as soon as possible. Thank you for bringing this to our attention. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Randy Ridgaway on 2014-01-03 09:07
Can the John Deere RE64583 7SUD3JD01 SCV Setup panel be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Lee Wei How (Wellson) on 2013-02-22 10:13
Please provide me with more information about the pricing and availability of the John Deere RE64583 7SUD5JD04 SCV Setup panel. I am interested in sourcing one quickly. Thank you.

—> Purchase or Repair:
#John Deere by Nikita on 2013-07-23 20:32
SCV setup Panel on John Deere RE63440 7SUD4JD03 is not responding.

—> Purchase or Repair:
#John Deere by Malay Mandal on 2015-07-11 03:20
It seems like there might be an issue with the CAN Monitor Unit on the John Deere AT320355 AT320694. I'm not entirely sure what that part does specifically, but it looks like it may have stopped working. We should probably have a technician take a look to diagnose the problem accurately. —> …Purchase or Repair: Ticket Image...
Show More

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.