John Deere Service & Repair Forum

The John Deere RE46704 7AT2JD01 experienced downtime due to the tach display not turning on when cold. To address this issue

—> Purchase or Repair: Ticket Image

— Posted by Dag on 2015-02-23

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by Josip on 2015-08-08 08:20
The John Deere AT320355 AT320694 CAN Monitor Unit malfunctioned yesterday during the night shift, causing unexpected downtime. Can you quickly provide an update on what went wrong and when it started? It's important to address this before the next shift begins.

—> Purchase or Repair:
#John Deere by Suliman on 2015-03-09 12:13
Looking for repair for John Deere RE66265 digital tachometer. The unit is not displaying any readings and seems completely dead. Need assistance from a professional technician.

—> Purchase or Repair:
#John Deere by Naranjo on 2013-01-15 12:27
Please ensure someone attends to the John Deere RE64583 7SUD5JD04 SCV setup panel issue

—> Purchase or Repair:
#John Deere by Fracassi Roberto on 2013-08-03 20:32
Equipment down due to error code SCV Setup panel on John Deere RE64583 7SUD5JD04. Need urgent assistance to troubleshoot and rectify.

—> Purchase or Repair:
#John Deere by George Hostutler on 2013-04-05 19:37
The John Deere RE64583 7SUD5JD04 is displaying error code E342. The SCV setup panel is unresponsive, preventing operation of the equipment. Please advise on troubleshooting steps or necessary repairs. Thank you.

—> Purchase or Repair:
#John Deere by balli aulakh on 2015-08-05 18:20
The unit with part numbers AT320355 and AT320694, which is the CAN Monitor Unit, is behaving abnormally. It is not functioning as it normally does and appears to be acting strangely.

—> Purchase or Repair:
#John Deere by Nathan Arnold on 2016-01-15 22:00
The John Deere RE172237 7VMU0JD01 Vehicle Monitor is failing to display critical information, causing delays in monitoring production processes. Immediate repair is needed to ensure optimal functioning of the production line.

—> Purchase or Repair:
#John Deere by adesh on 2013-06-12 23:59
The SCV Setup panel on the John Deere RE64583 7SUD5JD04 is malfunctioning, impacting the production line. Urgent repair service is needed to resolve this issue

—> Purchase or Repair:
#John Deere by Wuolewu on 2014-05-07 00:20
Equipment down due to error code 7SUD3JD01 displayed on John Deere RE64583 SCV Setup panel. Unable to operate machine. Need urgent assistance to troubleshoot and resolve issue.

—> Purchase or Repair:
#John Deere by Basson on 2013-03-20 09:49
The Bale Trak Plus RE159944 is displaying error code E01.

—> Purchase or Repair:
#John Deere by Robert Schmitt on 2013-12-30 19:27
Could you please provide some guidance and information regarding troubleshooting and repairing a John Deere RE64583 7SUD5JD04 SCV setup panel? My client is experiencing issues with it and requires assistance. Thank you for your support.

—> Purchase or Repair:
#John Deere by Leonardo Jose Fueyo on 2015-07-30 01:20
Can you please assist in checking whether the John Deere AT320355 AT320694 CAN Monitor Unit is still supported or if replacement parts are available? It's an older unit, and we are unsure about its manufacturer. Thank you.

—> Purchase or Repair:
#John Deere by Zavir on 2014-11-21 13:12
Could you please confirm if the John Deere RE64583 7SUD5JD04 motor control unit is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#John Deere by Paris Mihai on 2015-01-01 03:54
I'm currently experiencing an issue with the SCV Setup Panel on my John Deere RE64583 7SUD5JD04 machine. It seems that this feature has stopped working and I'm unsure of what the exact problem is. Your assistance in diagnosing and fixing this issue would be greatly appreciated. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Frank Taylor on 2015-07-17 09:20
I'm currently experiencing some issues with the SCV Setup Panel on my John Deere RE65483 7SUD5JD04. Something seems to have stopped working and I'm not sure how to fix it. Your assistance in resolving this matter would be greatly appreciated.

—> Purchase or Repair:
#John Deere by nguyen kim son on 2015-08-11 16:20
Could you please provide information on the John Deere parts AT320355 and AT320694? They are CAN Monitor Units requiring some service. Thank you.

—> Purchase or Repair:
#John Deere by Robert J. Stark on 2015-07-15 07:20
John Deere RE64583 7SUD5JD04 - SCV Setup Panel not responding, halting production.

—> Purchase or Repair:
#John Deere by FRED WALTHALL on 2016-03-19 18:03
Can the John Deere RE172237 7VMU0JD01 Vehicle Monitor be repaired or replaced? Trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#John Deere by TREJO on 2010-01-31 21:46
Do you have a John Deere Motorola RE64583 Digital Display available for sale or repair? The unit went down and production needs to keep running.

—> Purchase or Repair:
#John Deere by Chidester on 2015-08-08 01:20
The John Deere RE49192 7THM2JD03 Tachometer is not functioning as expected.

—> Purchase or Repair:
#John Deere by Torsten on 2013-08-17 12:01
The John Deere Bale Trak Plus RE159944 is down. Need to check and fix it before day shift.

—> Purchase or Repair:
#John Deere by Geagea on 2015-07-26 04:20
Issue with John Deere RE46704 7AT2JD01 - Tach Display doesn't come on when cold. Likely a failed drive or board.

—> Purchase or Repair:
#John Deere by Ronnebaum on 2015-01-07 11:41
The John Deere AT320355 AT320694 is a CAN Monitor Unit that is currently not working.

—> Purchase or Repair:
#John Deere by Marius on 2015-01-05 22:41
John Deere RE64583 7SUD5JD04 SCV Setup Panel down. Needs attention ASAP. Please check and repair in the morning. Thank you!

—> Purchase or Repair:
#John Deere by Eleanor on 2015-01-08 11:41
the John Deere RE66265 7MRT8JDO1E digital tachometer unit went down mid-shift. Needs attention ASAP.

—> Purchase or Repair:
#John Deere by p.srinivasu on 2015-07-29 10:20
Can you please provide information on whether the John Deere AT320355 AT320694 CAN Monitor Unit is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#John Deere by Carini on 2015-07-19 01:20
We experienced downtime with the John Deere RE65483 7SUD5JD04 due to issues with the SCV Setup Panel. The incident occurred earlier today during the morning shift. Please provide details on what happened. Thank you.

—> Purchase or Repair:
#John Deere by donald messier on 2015-02-23 13:47
Equipment down due to John Deere RE65483 SCV Setup Panel issue. Error code 7SUD5JD04. Need immediate assistance to resolve.

—> Purchase or Repair:
#John Deere by jianxin on 2013-07-17 10:55
Hello, I'm interested in purchasing the John Deere RE63440 7SUD4JD03 SCV setup Panel. Could you provide information about pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#John Deere by Randy Hamilton on 2013-11-01 19:52
Experiencing SCV setup panel issues on John Deere RE63440 7SUD4JD03 suspect a drive or board failure. Need immediate inspection and replacement.

—> Purchase or Repair:
#John Deere by Gary Wolfe on 2015-08-15 01:20
Hey there, could you please provide repair info for a John Deere RE64583 7SUD3JD01 SCV Setup Panel that stopped working? We need the replacement part urgently. Thank you!

—> Purchase or Repair:
#John Deere by James Cowart on 2013-02-11 00:39
I'm experiencing an issue with the SCV setup panel on the John Deere RE64583 7SUD5JD04. It seems like something has stopped working, and I'm not completely sure what the problem is. I'll need some help figuring this out.

—> Purchase or Repair:
#John Deere by Halder on 2014-02-12 23:58
John Deere RE43902 7MRT2JD02 controller malfunction causing production line downtime. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#John Deere by SINGHAL on 2015-02-23 03:47
John Deere RE64583 7SUD5JD04 SCV Setup Panel not responding.

—> Purchase or Repair:
#John Deere by Danladi A Birdling on 2015-08-17 00:00
Assistance Required for John Deere A336395 Joystick ControllerHello ,Im reaching out on behalf of someone in the shop who needs help with the John Deere A336395 Joystick Controller. They mentioned that it's currently not working. Could you please provide guidance or assistance to resolve this issue?…Purchase or Repair: Ticket Image...
Show More
#John Deere by annmarie on 2014-11-01 01:57
Are you able to repair the John Deere RE64583 7SUD5JD04 motor control unit, or do you have a replacement available for sale? It's urgent to keep production running.

—> Purchase or Repair:
#John Deere by john lowrey on 2015-07-12 13:32
We experienced downtime with the John Deere RE65483 7SUD5JD04 due to issues with the SCV Setup Panel. The incident occurred during our shift yesterday from 10 AM to 2 PM. Please provide feedback or instructions before the next shift begins. Thank you.

—> Purchase or Repair:
#John Deere by Ghanshyam on 2015-08-01 17:20
The John Deere RE66265 7MRT8JDO1E digital tachometer is displaying abnormal behavior. It is not functioning as it typically does.

—> Purchase or Repair:
#John Deere by Abdulkader on 2015-08-06 06:20
The John Deere RE64583 7SUD5JD04 experienced downtime due to issues with the SCV Setup Panel. The incident occurred during our shift. Please provide insights on what went wrong before the next shift begins.

—> Purchase or Repair:
#John Deere by Gary Denemark on 2015-07-28 14:20
Hello, we have a John Deere part AT320355 AT320694, the CAN Monitor Unit, that needs repair but we can't find a replacement. Please provide repair information or options as soon as possible. Thank you.

—> Purchase or Repair:
#John Deere by brian egan on 2014-01-07 11:22
The John Deere RE64583 7SUD5JD04 is displaying ERROR CODE 305 - MOTOR CONTROL FAILURE. Equipment is currently down, urgent assistance needed.

—> Purchase or Repair:
#John Deere by wilfran caballero on 2016-12-17 00:50
The SCV Setup Panel on the John Deere RE64583 7SUD5JD04 is malfunctioning, affecting the production line. Urgent repair service support is needed to resolve the issue

—> Purchase or Repair:
#John Deere by ATIF ALI on 2013-08-15 07:01
The SCV setup Panel on John Deere RE63440 7SUD4JD03 is malfunctioning, affecting the line's productivity. Urgent repair service is needed to resolve the issue

—> Purchase or Repair:
#John Deere by Nathan Yehirai on 2015-02-23 10:47
The SCV Setup Panel on my John Deere RE64583 7SUD3JD01 is displaying an error message and is not responding to input commands.

—> Purchase or Repair:
#John Deere by annamaria paliotti on 2016-11-07 03:44
Can you please confirm if the John Deere 120974T AT167497 monitor is still supported, and if it is, are replacement parts available for it? Thank you.

—> Purchase or Repair:
#John Deere by george graw on 2015-04-27 19:58
Do you have a John Deere RE49192 7THM2JD03 tachometer available for sale or repair? Our unit stopped functioning, and we need to keep production running smoothly.

—> Purchase or Repair:
#John Deere by Dag on 2015-02-23 11:47
The John Deere RE46704 7AT2JD01 experienced downtime due to the tach display not turning on when cold. To address this issue

—> Purchase or Repair:
#John Deere by Jimmy Ng on 2015-08-12 20:20
Hello, do you have a John Deere RE64583 7SUD3JD01 SCV Setup Panel available for sale or repair? Our production is currently down, and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#John Deere by bouzid on 2015-02-23 05:47
Equipment down due to faulty tachometer (John Deere RE49192 7THM2JD03). No display on screen, possible internal connection issue. Need urgent repair.

—> Purchase or Repair:
#John Deere by fida hussain on 2011-09-20 03:26
John Deere RE66821 7AT6JD01 is down, not functioning correctly. Analog Tachometer not working, no response to any input. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.