John Deere for Service call 1-336-969-0110 at Industrial Electronics Repair

John Deere Service & Repair Forum

I can assist you with that. I will check if the John Deere RE66265 7MRT8JDO1E digital tachometer is still supported or if replacement parts are available.

—> Purchase or Repair:

— Posted by Eddie Samaniego on 2015-04-27

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "John Deere"

John Deere → John Deere RE63440 7SUD4JD03 ↗
John Deere → John Deere MOTOROLA RE64583 ↗
John Deere → John Deere RE66821 7AT6JD01 ↗
John Deere → John Deere BALE TRAK PLUS RE159944 ↗
John Deere → John Deere RE64583 7SUD5JD04 ↗

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 327 Comments

#John Deere by Jacob Bergen on 2024-08-23 10:45

I have a John Deere RE219402 controller that is not functioning properly. The unit fails to power on and does not respond to any input commands. I have attempted to troubleshoot the issue by checking all connections and ensuring proper power supply, but the problem persists. Based on my assessment, …Purchase or Repair:

#John Deere by Frank Taylor on 2015-07-17 09:20

I'm currently experiencing some issues with the SCV Setup Panel on my John Deere RE65483 7SUD5JD04. Something seems to have stopped working and I'm not sure how to fix it. Your assistance in resolving this matter would be greatly appreciated.

—> Purchase or Repair:

#John Deere by Suliman on 2015-03-09 12:13

Looking for repair for John Deere RE66265 digital tachometer. The unit is not displaying any readings and seems completely dead. Need assistance from a professional technician.

—> Purchase or Repair:

#John Deere by bouzid on 2015-02-23 05:47

Equipment down due to faulty tachometer (John Deere RE49192 7THM2JD03). No display on screen, possible internal connection issue. Need urgent repair.

—> Purchase or Repair:

#John Deere by Bernd on 2011-11-15 16:47

I'm sorry to hear about the issue with your John Deere RE66821 7AT6JD01 Analog Tachometer. It seems like something may have stopped working properly. I recommend reaching out to a technician for a detailed evaluation.

—> Purchase or Repair:

#John Deere by Dittrick on 2015-12-29 09:36

Can the John Deere RE64583 7SUD3JD01 SCV Setup Panel be repaired or bought to fix the issue you are experiencing? I'm trying to address this on my to-do list.

—> Purchase or Repair:

#John Deere by Gastón Godoy L. on 2013-08-22 14:32

The John Deere Bale Trak Plus RE159944 unit in the warehouse is displaying unusual behavior.

—> Purchase or Repair:

#John Deere by FERNANDO ALVAREZ on 2016-12-10 13:00

The John Deere RE172237 7VMU0JD01 Vehicle Monitor isn't working properly.

—> Purchase or Repair:

#John Deere by Garay on 2013-03-11 01:53

Hi team, the John Deere Bale Trak Plus RE159944 is down; need someone to check it out during the day. Thanks!

—> Purchase or Repair:

#John Deere by ARUMOY CHATTERJEE on 2011-04-07 15:48

John Deere RE66821 7AT6JD01 Analog Tachometer issue Drive or board failure. Requires immediate troubleshooting and replacement.

—> Purchase or Repair:

#John Deere by Carmelo Cocuzza on 2013-08-16 04:01

Hello, I am interested in purchasing the John Deere RE64583 7SUD5JD04 SCV Setup panel. Could you please provide information regarding pricing and availability? I am trying to source one quickly. Thank you.

—> Purchase or Repair:

#John Deere by Wisnu R Maulana on 2015-03-10 05:13

Please provide an update on the status of my John Deere RE66265 7MRT8JDO1E Digital Tachometer. This issue needs

—> Purchase or Repair:

#John Deere by TINE on 2015-07-17 07:20

John Deere RE64583 7SUD5JD04 experienced downtime due to an issue with the SCV Setup Panel on . Need resolution before the next shift, appreciate a fast response.

—> Purchase or Repair:

#John Deere by Anand Palkar on 2014-12-19 05:44

Hi, our John Deere RE43902 7MRT2JD02 is down and displaying error code E102. Need urgent assistance to diagnose and fix the issue. Please advise on next steps. Thank you.

—> Purchase or Repair:

#John Deere by Torp on 2015-01-10 05:41

I understand that the CAN Monitor Unit in your John Deere AT320355 AT320694 is not functioning properly. The exact issue with the machine is unclear, but we will do our best to assist you and resolve the problem as soon as possible. Thank you for bringing this to our attention. —> …Purchase or Repair:

#John Deere by Leslie on 2013-11-30 12:36

Hello, following up on my previous message regarding the John Deere RE64583 unit. It's still down. I urgently need assistance to resolve the issue. Please respond

—> Purchase or Repair:

#John Deere by Al Schrock on 2013-08-13 10:35

Could you please confirm if the John Deere RE64583 7SUD5JD04 SCV setup panel is still supported and if replacement parts are available? Your

—> Purchase or Repair:

#John Deere by Robert Schmitt on 2013-12-30 19:27

Could you please provide some guidance and information regarding troubleshooting and repairing a John Deere RE64583 7SUD5JD04 SCV setup panel? My client is experiencing issues with it and requires assistance. Thank you for your support.

—> Purchase or Repair:

#John Deere by Gary Wolfe on 2015-08-15 01:20

Hey there, could you please provide repair info for a John Deere RE64583 7SUD3JD01 SCV Setup Panel that stopped working? We need the replacement part urgently. Thank you!

—> Purchase or Repair:

#John Deere by Tran Minh on 2013-02-25 12:48

Hello, I've noticed that the John Deere Bale Trak Plus RE159944 is displaying abnormal behavior. Instead of functioning as usual, it seems to be acting strangely. Thank you for looking into this issue for me.

—> Purchase or Repair:

#John Deere by Bruno Arca on 2013-08-13 20:35

Do you have a John Deere Bale Trak Plus RE159944 available for sale or repair? Our unit has gone down, and we need to get production up and running quickly.

—> Purchase or Repair:

#John Deere by Zia on 2013-10-21 12:49

I believe there might be an issue with the SCV setup panel on your John Deere RE64583. It seems like something has stopped working, but I'm not exactly sure what it does. I would recommend getting it checked by a professional to diagnose the problem accurately.

—> Purchase or Repair:

#John Deere by Shaliah AM on 2015-07-12 03:32

The issue with the John Deere RE46704 7AT2JD01 is that the Tach Display fails to come on when cold. This is affecting the production line as it hinders visibility and monitoring. Immediate attention is required to resolve this issue

—> Purchase or Repair:

#John Deere by Mon Torres on 2015-02-17 20:24

I need assistance with my John Deere AT320355 AT320694, which is a CAN Monitor Unit. It's an older unit, and we're unsure of the manufacturer. Can you please confirm if it's still supported or if replacement parts are available?

—> Purchase or Repair:

#John Deere by Eli on 2014-12-04 12:23

I would like to inquire about the availability of support or replacement parts for the John Deere RE64583 7SUD5JD04 motor control unit.

—> Purchase or Repair:

#John Deere by bill whitacre on 2013-07-29 02:32

Looks like we've got a problem with the SCV setup panel on the John Deere RE64583 7SUD5JD04. Drive or board failure, need immediate attention.

—> Purchase or Repair:

#John Deere by Mulinge on 2014-02-15 11:58

Hello, the John Deere RE64583 7SUD3JD01 is displaying error code 7SUD3JD01 on the SCV Setup panel. The equipment is currently down and not functioning. Please advise on next steps to resolve the issue

—> Purchase or Repair:

#John Deere by Nakata on 2013-10-30 18:58

I need an update on the John Deere RE64583 7SUD5JD04 SCV setup panel. The unit is still down. Please provide assistance immediately.

—> Purchase or Repair:

#John Deere by Richard Byrd on 2013-04-30 03:05

I'm experiencing an issue with the SCV setup panel on my John Deere RE64583 7SUD5JD04. Something seems to have stopped working, and I'm not sure what the exact problem is. Any guidance or assistance would be greatly appreciated.

—> Purchase or Repair:

#John Deere by Dimitar on 2013-02-05 12:30

Please provide more details about the John Deere RE63440 7SUD4JD03 SCV setup Panel so that we can check if it's still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:

#John Deere by Hohmann on 2013-07-27 21:32

I need assistance with the John Deere RE64583 7SUD5JD04 SCV Setup panel unit. It's not functioning properly.

—> Purchase or Repair:

#John Deere by Mat Eicher on 2011-06-23 15:36

Can the John Deere RE66821 7AT6JD01 Analog Tachometer be repaired or replaced? I'm looking to check this off my to-do list.

—> Purchase or Repair:

#John Deere by ian pierce on 2005-02-02 00:00

Hello, I am reaching out on behalf of my client regarding an issue with part number RE64583 7SUD3JD01 on their John Deere equipment. The problem seems to involve the SCV Setup panel. Can you please provide more information or guidance on how to address this issue? Thank you.

—> Purchase or Repair:

#John Deere by Mario Orta on 2014-12-18 14:44

Hello, I'm reaching out on behalf of my client who needs assistance with a John Deere RE64583 7SUD5JD04. The description mentions an issue with the motor control. Can you provide more information on troubleshooting or repairing this part? Thank you.

—> Purchase or Repair:

#John Deere by mixon on 2014-12-22 11:44

Can the John Deere RE64583 7SUD5JD04 motor control be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:

#John Deere by TOO on 2013-07-01 14:47

The John Deere RE64583 SCV Setup panel unit is displaying unusual behavior. The panel is not functioning as expected and is acting strangely.

—> Purchase or Repair:

#John Deere by runyan on 2010-09-09 19:51

The digital display on the John Deere Motorola RE64583 is malfunctioning, disrupting the production line. Urgent repair is required to restore operations

—> Purchase or Repair:

#John Deere by IVAN PUCH MEX on 2013-08-13 04:35

My John Deere Bale Trak Plus RE159944 isn't displaying any data or responding. Looking for a technician who can troubleshoot and repair it

—> Purchase or Repair:

#John Deere by Carini on 2015-07-19 01:20

We experienced downtime with the John Deere RE65483 7SUD5JD04 due to issues with the SCV Setup Panel. The incident occurred earlier today during the morning shift. Please provide details on what happened. Thank you.

—> Purchase or Repair:

#John Deere by Thang on 2015-07-05 17:58

Hello, I am interested in the John Deere RE49192 7THM2JD03 Tachometer. Could you please let me know the pricing and availability? I am trying to source one quickly. Thank you.

—> Purchase or Repair:

#John Deere by Slava Berenshteyn on 2015-07-19 15:20

the John Deere RE49192 7THM2JD03 tachometer unit went down mid-shift. Please check it out and troubleshoot first thing in the morning. Thanks!

—> Purchase or Repair:

#John Deere by roger moutal on 2015-02-02 18:39

I'm interested in buying the John Deere RE65483 7SUD5JD04 SCV Setup Panel. Could you please provide information on pricing and availability? We're looking to source one quickly. Thank you.

—> Purchase or Repair:

#John Deere by Geagea on 2015-07-26 04:20

Issue with John Deere RE46704 7AT2JD01 - Tach Display doesn't come on when cold. Likely a failed drive or board.

—> Purchase or Repair:

#John Deere by Mathias on 2013-07-26 02:32

John Deere RE63440 7SUD4JD03 SCV setup Panel down mid-shift. Please check it out in the morning.

—> Purchase or Repair:

#John Deere by Parand on 2015-06-22 18:12

Hello, I am reaching out on behalf of my client who has a John Deere RE66265 Digital Tachometer with the following issue 7MRT8JDO1E. Can you please provide more information or assistance with this part? Thank you.

—> Purchase or Repair:

#John Deere by JMartins on 2015-01-10 04:41

Do you have a John Deere RE66265 7MRT8JDO1E Digital Tachometer available for repair or purchase? Need one urgently to keep production running smoothly.

—> Purchase or Repair:

#John Deere by TFI on 2015-03-16 06:25

Hello, we're in need of repair information for a John Deere AT320355 AT320694. It's a CAN Monitor Unit that stopped working. Can you please provide the details as soon as possible? Thank you.

—> Purchase or Repair:

#John Deere by Joshua McCoy on 2014-02-14 09:58

Hi, do you have a John Deere RE64583 7SUD5JD04 motor control unit available for sale or repair? Our production is down, and we need to get it fixed quickly to keep operations running smoothly. Thank you.

—> Purchase or Repair:

#John Deere by Zavir on 2014-11-21 13:12

Could you please confirm if the John Deere RE64583 7SUD5JD04 motor control unit is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:

#John Deere by JiaJun Huo on 2015-03-31 08:04

Please provide an update on the status of my John Deere RE46704 7AT2JD01 with the issue of the Tach Display not turning on when cold. This problem needs immediate attention in order to get the unit back up and running. Your

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.