John Deere Service & Repair Forum

The John Deere RE46704 7AT2JD01 is still down. Please address the issue and provide an update

—> Purchase or Repair: Ticket Image

— Posted by Engiz on 2015-07-20

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by Jacob Bergen on 2024-08-23 10:45
I have a John Deere RE219402 controller that is not functioning properly. The unit fails to power on and does not respond to any input commands. I have attempted to troubleshoot the issue by checking all connections and ensuring proper power supply, but the problem persists. Based on my assessment, …Purchase or Repair: Ticket Image...
Show More
#John Deere by wes wilhour on 2011-12-25 18:07
the John Deere RE66821 7AT6JD01 Analog Tachometer unit went down mid-shift. Needs attention ASAP!

—> Purchase or Repair:
#John Deere by Miguel Reyes on 2011-09-09 07:35
Please provide me with more information about the John Deere RE66821 7AT6JD01 Analog Tachometer. I need to know if it is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:
#John Deere by Leslie on 2013-11-30 12:36
Hello, following up on my previous message regarding the John Deere RE64583 unit. It's still down. I urgently need assistance to resolve the issue. Please respond

—> Purchase or Repair:
#John Deere by Zavir on 2014-11-21 13:12
Could you please confirm if the John Deere RE64583 7SUD5JD04 motor control unit is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#John Deere by Les Abend on 2015-08-08 05:20
Could you please provide repair information for a John Deere RE64583 7SUD5JD04 SCV Setup Panel? We need a replacement part urgently, but can't locate one. Your

—> Purchase or Repair:
#John Deere by breslin on 2013-08-12 02:32
Equipment down with error code displayed on John Deere RE64583 SCV Setup panel. Need urgent assistance troubleshooting issue to resume operation.

—> Purchase or Repair:
#John Deere by Garay on 2013-03-11 01:53
Hi team, the John Deere Bale Trak Plus RE159944 is down; need someone to check it out during the day. Thanks!

—> Purchase or Repair:
#John Deere by ilbay on 2014-11-01 20:57
Experiencing issues with my John Deere RE43902 7MRT2JD02 controller, not functioning properly. Looking for a skilled technician to diagnose and repair as soon as possible.

—> Purchase or Repair:
#John Deere by Eddie Samaniego on 2015-04-27 18:58
I can assist you with that. I will check if the John Deere RE66265 7MRT8JDO1E digital tachometer is still supported or if replacement parts are available.

—> Purchase or Repair:
#John Deere by Hopf on 2013-07-23 03:32
Please provide me with information on the availability of support or replacement parts for the John Deere RE64583 7SUD5JD04 SCV Setup panel. Thank you.

—> Purchase or Repair:
#John Deere by Nakata on 2013-10-30 18:58
I need an update on the John Deere RE64583 7SUD5JD04 SCV setup panel. The unit is still down. Please provide assistance immediately.

—> Purchase or Repair:
#John Deere by balli aulakh on 2015-08-05 18:20
The unit with part numbers AT320355 and AT320694, which is the CAN Monitor Unit, is behaving abnormally. It is not functioning as it normally does and appears to be acting strangely.

—> Purchase or Repair:
#John Deere by Edge on 2025-05-20 18:29
Hello, my John Deere BCU AL165751 controller is malfunctioning. Looking for repairs ASAP. Any technicians available? Thank you.

—> Purchase or Repair:
#John Deere by Fred Coster on 2013-04-28 13:18
The John Deere RE64583 7SUD5JD04 is not functioning properly. Please check the SCV Setup panel.

—> Purchase or Repair:
#John Deere by Martin Connor on 2015-07-30 07:20
I need assistance with my John Deere RE65483 7SUD5JD04 for the SCV Setup Panel. This unit caused downtime and I should report it as a shift supervisor. I need a quick answer regarding what happened and when before the next shift starts.

—> Purchase or Repair:
#John Deere by S.RAVINDRANATH on 2013-03-25 15:32
I am following up on my previous message regarding the John Deere RE63440 7SUD4JD03 unit being down. Please provide assistance

—> Purchase or Repair:
#John Deere by Juan Galvez on 2016-10-07 03:24
John Deere 120974T AT167497 Monitor not displaying any data.

—> Purchase or Repair:
#John Deere by Wayne Alderman on 2015-07-31 15:20
Do you have a John Deere RE49192 7THM2JD03 Tachometer available for sale or repair? Our unit is down, and we need to keep production running.

—> Purchase or Repair:
#John Deere by ahmed gomaa on 2015-07-08 23:32
Hi, the John Deere RE64583 7SUD3JD01 is showing error code SCV Setup Panel. Equipment is currently down and in need of urgent repair. Thank you.

—> Purchase or Repair:
#John Deere by Secor on 2013-08-12 03:32
I'm sorry to hear about the issue with your John Deere RE64583 7SUD5JD04. It seems like there might be a problem with the SCV setup panel. I recommend contacting a technician for a detailed inspection and repair.

—> Purchase or Repair:
#John Deere by DARLENE CARTER on 2013-09-12 07:28
I need repair info for a John Deere RE64583 SCV Setup panel. Can you assist with this inquiry? Thank you.

—> Purchase or Repair:
#John Deere by christian lahoud on 2013-07-13 23:57
Do you have a replacement John Deere RE63440 7SUD4JD03 SCV setup Panel available? It's critical for keeping production running smoothly. Thank you.

—> Purchase or Repair:
#John Deere by V S yadav on 2015-07-28 08:20
Hello, I'm interested in the John Deere RE46704 7AT2JD01 part for a tach display. Could you please provide information on pricing and availability? I'm looking to source this unit quickly. Thank you.

—> Purchase or Repair:
#John Deere by nguyen kim son on 2015-08-11 16:20
Could you please provide information on the John Deere parts AT320355 and AT320694? They are CAN Monitor Units requiring some service. Thank you.

—> Purchase or Repair:
#John Deere by Al Schrock on 2013-08-13 10:35
Could you please confirm if the John Deere RE64583 7SUD5JD04 SCV setup panel is still supported and if replacement parts are available? Your

—> Purchase or Repair:
#John Deere by Slava Berenshteyn on 2015-07-19 15:20
the John Deere RE49192 7THM2JD03 tachometer unit went down mid-shift. Please check it out and troubleshoot first thing in the morning. Thanks!

—> Purchase or Repair:
#John Deere by fida hussain on 2011-09-20 03:26
John Deere RE66821 7AT6JD01 is down, not functioning correctly. Analog Tachometer not working, no response to any input. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:
#John Deere by Derek Baker on 2016-03-23 17:19
John Deere 120974T AT167497 Monitor is malfunctioning, impacting production line efficiency. Urgent repair needed to resume operations

—> Purchase or Repair:
#John Deere by rumanto on 2014-07-18 14:24
Hello, could you please provide repair info for a John Deere RE64583 7SUD3JD01 SCV Setup panel? It needs to be replaced, but we can't find one. Thank you!

—> Purchase or Repair:
#John Deere by Nathan Arnold on 2016-01-15 22:00
The John Deere RE172237 7VMU0JD01 Vehicle Monitor is failing to display critical information, causing delays in monitoring production processes. Immediate repair is needed to ensure optimal functioning of the production line.

—> Purchase or Repair:
#John Deere by Bernd on 2011-11-15 16:47
I'm sorry to hear about the issue with your John Deere RE66821 7AT6JD01 Analog Tachometer. It seems like something may have stopped working properly. I recommend reaching out to a technician for a detailed evaluation.

—> Purchase or Repair:
#John Deere by syarif hidayat on 2013-08-13 13:35
The John Deere Bale Trak Plus RE159944 is failing to display accurate bale counts and is not registering bale sizes correctly. This issue is affecting the production line efficiency and needs immediate attention to prevent further delays.

—> Purchase or Repair:
#John Deere by Richard Gosche on 2015-08-05 23:20
Drive or board failure on John Deere RE66265 Digital Tachometer, need immediate maintenance. Heading to next machine, will troubleshoot further upon return.

—> Purchase or Repair:
#John Deere by Mark W Griffin on 2013-02-19 03:27
Do you have a replacement John Deere RE64583 SCV Setup panel available for purchase or repair? Production has been interrupted, and we need to keep things running smoothly.

—> Purchase or Repair:
#John Deere by Matt on 2013-08-18 17:32
Hello, I wanted to inquire about the pricing and availability of the John Deere Bale Trak Plus RE159944. I'm looking to source one quickly and would appreciate any assistance you can provide. Thank you.

—> Purchase or Repair:
#John Deere by Alexandre Moreira on 2014-12-28 20:06
The John Deere RE64583 7SUD5JD04 unit went down mid-shift due to a MOTOR CONTROL issue. Please have someone address it during the day shift. Thanks!

—> Purchase or Repair:
#John Deere by Haldor on 2013-11-16 23:30
The John Deere Bale Trak Plus RE159944 is not functioning properly and needs maintenance.

—> Purchase or Repair:
#John Deere by Thomas wood on 2015-03-26 11:20
The John Deere RE66265 Digital Tachometer is not working.

—> Purchase or Repair:
#John Deere by film on 2015-07-28 12:20
Unit RE46704 7AT2JD01 experienced downtime due to the Tach Display not coming on when cold. This issue occurred during the night shift and is currently affecting production. Please advise on a solution before the next shift starts.

—> Purchase or Repair:
#John Deere by John Demers on 2015-08-04 07:20
Hello, I'm inquiring about an issue with part number RE46704 7AT2JD01. The tach display doesn't come on when cold. Can you please provide information on troubleshooting and potential solutions? Thank you.

—> Purchase or Repair:
#John Deere by Caps on 2016-11-22 14:01
Drive or board failure on John Deere RE66264 7MRT6JD01 digital tachometer. Need to troubleshoot and replace to get it back up and running.

—> Purchase or Repair:
#John Deere by Kohloff on 2013-08-07 08:32
John Deere RE63440 7SUD4JD03 is experiencing issues with the SCV setup Panel, causing a slowdown in production. Please address this urgently to minimize downtime.

—> Purchase or Repair:
#John Deere by cotrus on 2015-07-13 10:20
Please follow up immediately regarding the John Deere AT320355 AT320694 CAN Monitor Unit. It is still not functioning, and we need a resolution as soon as possible.

—> Purchase or Repair:
#John Deere by Gary Denemark on 2015-07-28 14:20
Hello, we have a John Deere part AT320355 AT320694, the CAN Monitor Unit, that needs repair but we can't find a replacement. Please provide repair information or options as soon as possible. Thank you.

—> Purchase or Repair:
#John Deere by claudia on 2014-12-16 15:44
Please advise if the John Deere RE43902 7MRT2JD02 controller is still supported or if replacement parts are available for this unit. Thank you.

—> Purchase or Repair:
#John Deere by ARUMOY CHATTERJEE on 2011-04-07 15:48
John Deere RE66821 7AT6JD01 Analog Tachometer issue Drive or board failure. Requires immediate troubleshooting and replacement.

—> Purchase or Repair:
#John Deere by Nick Oshana on 2015-02-28 04:07
The John Deere RE64583 is displaying an SCV Setup Panel error. Unable to engage or control SCVs. Equipment is down. Need assistance urgently.

—> Purchase or Repair:
#John Deere by Edwin B. Tolentino on 2015-07-19 02:20
Please provide assistance with John Deere part number RE64583 7SUD5JD04 for the SCV Setup Panel. Thank you.

—> Purchase or Repair:
#John Deere by Dan Arrington on 2014-10-31 23:57
Hi there, could you please provide repair info for a John Deere RE64583 7SUD5JD04 motor control? It stopped working and we need to find a replacement. Thanks!

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.