John Deere Service & Repair Forum

The SCV Setup Panel on the John Deere RE64583 7SUD5JD04 is malfunctioning, affecting the production line. Urgent repair service support is needed to resolve the issue

—> Purchase or Repair: Ticket Image

— Posted by wilfran caballero on 2016-12-17

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by David Wilhelm on 2026-02-05 06:57
Request Service for John DeereModel/Part : Re208064 DisplayCrossed the battery leads which burned the fusable link. After that event the gauges work, but are not accurate or repeatable.

—> Purchase or Repair:
#John Deere by Amanda Waters on 2013-07-06 00:09
The John Deere RE63440 7SUD4JD03 SCV setup panel is not functioning as expected. It seems to be acting unusual and not performing its usual functions.

—> Purchase or Repair:
#John Deere by s b sharma on 2015-07-31 05:20
I believe there's an issue with the digital tachometer on the John Deere RE66265 7MRT8JDO1E. It seems like the digital display has stopped working properly. Would you like me to investigate further or seek help from a technician?

—> Purchase or Repair:
#John Deere by TT on 2014-04-03 16:29
The John Deere RE43902 7MRT2JD02 Controller is malfunctioning, causing a halt in production. Urgent repair is needed to get the line running smoothly again.

—> Purchase or Repair:
#John Deere by Strohmenger on 2015-08-04 13:19
The digital tachometer on the John Deere RE66265 7MRT8JDO1E is malfunctioning, affecting the production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#John Deere by John Richards on 2014-02-12 02:58
The unit RE64583 7SUD3JD01 is not working properly. It is related to the SCV Setup panel.

—> Purchase or Repair:
#John Deere by Su on 2013-12-12 20:58
John Deere RE63440 7SUD4JD03 SCV setup Panel unit went down mid-shift. Needs attention ASAP.

—> Purchase or Repair:
#John Deere by Hemal Shah on 2016-06-17 18:28
The John Deere RE172237 7VMU0JD01 Vehicle Monitor is failing to display critical data, causing delays and disruptions in our production line. Immediate repair service is urgently needed to prevent further downtime.

—> Purchase or Repair:
#John Deere by audrey on 2014-12-28 13:06
John Deere RE43902 7MRT2JD02 controller not powering on.

—> Purchase or Repair:
#John Deere by larry palmer on 2025-06-08 07:22
Do you have a John Deere RE218346 controller available for sale or for repair? Need it urgently to keep production running.

—> Purchase or Repair:
#John Deere by Senthil on 2015-08-09 23:20
The John Deere RE64583 7SUD5JD04 SCV Setup Panel is not functioning as expected. The unit is displaying unusual behavior, which is different from its normal operation.

—> Purchase or Repair:
#John Deere by AVELLANEDA on 2015-07-05 21:58
The John Deere RE49192 Tachometer is not working.

—> Purchase or Repair:
#John Deere by christian lahoud on 2013-07-13 23:57
Do you have a replacement John Deere RE63440 7SUD4JD03 SCV setup Panel available? It's critical for keeping production running smoothly. Thank you.

—> Purchase or Repair:
#John Deere by Kanishka Weerathunge on 2015-04-23 21:05
John Deere RE65483 7SUD5JD04 showing error message "SCV Setup Panel Malfunction" - production halted.

—> Purchase or Repair:
#John Deere by Mario Orta on 2014-12-18 14:44
Hello, I'm reaching out on behalf of my client who needs assistance with a John Deere RE64583 7SUD5JD04. The description mentions an issue with the motor control. Can you provide more information on troubleshooting or repairing this part? Thank you.

—> Purchase or Repair:
#John Deere by Pierre Guex on 2015-07-20 13:20
Can the John Deere AT320355 AT320694 CAN Monitor Unit be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by fida hussain on 2011-09-20 03:26
John Deere RE66821 7AT6JD01 is down, not functioning correctly. Analog Tachometer not working, no response to any input. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:
#John Deere by Leo McCarthy on 2015-08-11 04:20
Drive or board failure in John Deere AT320355 AT320694 CAN Monitor Unit. Action needed ASAP.

—> Purchase or Repair:
#John Deere by Darek on 2015-07-09 17:32
Please provide details on the repair service for John Deere parts AT320355 and AT320694, described as CAN Monitor Units. Thank you.

—> Purchase or Repair:
#John Deere by Marius on 2015-01-05 22:41
John Deere RE64583 7SUD5JD04 SCV Setup Panel down. Needs attention ASAP. Please check and repair in the morning. Thank you!

—> Purchase or Repair:
#John Deere by marlon on 2015-07-20 02:20
Experiencing issues with my John Deere RE64583 7SUD5JD04 SCV Setup Panel. Need a skilled technician to repair it

—> Purchase or Repair:
#John Deere by Jashid P.T. on 2015-07-18 06:20
My John Deere RE64583 7SUD3JD01 SCV Setup Panel is malfunctioning, not responding to commands. Urgently seeking an experienced technician to diagnose the issue and perform necessary repairs. Thank you.

—> Purchase or Repair:
#John Deere by Stoil on 2010-09-04 01:47
I'm experiencing some issues with the John Deere Motorola RE64583. The digital display seems to have stopped working. I'm not entirely sure what the problem might be, but I wanted to bring it to your attention.

—> Purchase or Repair:
#John Deere by James Cowart on 2013-02-11 00:39
I'm experiencing an issue with the SCV setup panel on the John Deere RE64583 7SUD5JD04. It seems like something has stopped working, and I'm not completely sure what the problem is. I'll need some help figuring this out.

—> Purchase or Repair:
#John Deere by REALI on 2015-08-06 21:20
The John Deere RE64583 7SUD3JD01 SCV Setup Panel is displaying abnormal behavior in the warehouse.

—> Purchase or Repair:
#John Deere by VIVEK AGARWAL on 2021-06-21 00:00
Experiencing issues with the Cluster Gauge Assembly on my John Deere AL77111E. Need a repair technician to address the malfunction.

—> Purchase or Repair:
#John Deere by Richard Byrd on 2013-04-30 03:05
I'm experiencing an issue with the SCV setup panel on my John Deere RE64583 7SUD5JD04. Something seems to have stopped working, and I'm not sure what the exact problem is. Any guidance or assistance would be greatly appreciated.

—> Purchase or Repair:
#John Deere by Neill on 2013-08-03 03:32
The John Deere RE64583 7SUD5JD04 SCV setup panel seems to be experiencing unusual behavior in the warehouse. It is not functioning as it normally does, displaying strange actions that are out of the ordinary.

—> Purchase or Repair:
#John Deere by Derek Baker on 2016-03-23 17:19
John Deere 120974T AT167497 Monitor is malfunctioning, impacting production line efficiency. Urgent repair needed to resume operations

—> Purchase or Repair:
#John Deere by bayo on 2015-08-14 07:20
John Deere RE66265 7MRT8JDO1E Digital Tachometer not displaying any readings.

—> Purchase or Repair:
#John Deere by KHAN on 2013-07-29 09:32
Do you have a replacement John Deere RE64583 7SUD5JD04 SCV setup panel available for sale or repair? It's urgent to keep production running.

—> Purchase or Repair:
#John Deere by Ronnebaum on 2015-01-07 11:41
The John Deere AT320355 AT320694 is a CAN Monitor Unit that is currently not working.

—> Purchase or Repair:
#John Deere by Baleras on 2015-07-07 15:32
Can the SCV Setup Panel for the John Deere RE65483 7SUD5JD04 be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by steven schmit on 2013-05-02 02:50
The John Deere Bale Trak Plus RE159944 is displaying error code E001. The bale monitor is not detecting any bales although they are passing through. Need urgent assistance to troubleshoot and resolve this issue. Thank you.

—> Purchase or Repair:
#John Deere by tuan truong on 2015-01-12 12:41
The CAN Monitor Unit on the John Deere AT320355 AT320694 is malfunctioning, causing a disruption in the production line. Immediate attention is needed to resolve this issue efficiently and resume operations swiftly.

—> Purchase or Repair:
#John Deere by Miguel Reyes on 2011-09-09 07:35
Please provide me with more information about the John Deere RE66821 7AT6JD01 Analog Tachometer. I need to know if it is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:
#John Deere by Zia on 2013-10-21 12:49
I believe there might be an issue with the SCV setup panel on your John Deere RE64583. It seems like something has stopped working, but I'm not exactly sure what it does. I would recommend getting it checked by a professional to diagnose the problem accurately.

—> Purchase or Repair:
#John Deere by Martin Connor on 2015-07-30 07:20
I need assistance with my John Deere RE65483 7SUD5JD04 for the SCV Setup Panel. This unit caused downtime and I should report it as a shift supervisor. I need a quick answer regarding what happened and when before the next shift starts.

—> Purchase or Repair:
#John Deere by Mon Torres on 2015-02-17 20:24
I need assistance with my John Deere AT320355 AT320694, which is a CAN Monitor Unit. It's an older unit, and we're unsure of the manufacturer. Can you please confirm if it's still supported or if replacement parts are available?

—> Purchase or Repair:
#John Deere by Ron Geiser on 2013-08-15 10:32
Could you please confirm if the John Deere RE64583 7SUD5JD04 SCV Setup panel is still supported or if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#John Deere by Carini on 2015-07-19 01:20
We experienced downtime with the John Deere RE65483 7SUD5JD04 due to issues with the SCV Setup Panel. The incident occurred earlier today during the morning shift. Please provide details on what happened. Thank you.

—> Purchase or Repair:
#John Deere by Swanepoel on 2011-04-11 19:20
The John Deere RE66821 7AT6JD01 analog tachometer unit is not working.

—> Purchase or Repair:
#John Deere by DARLENE CARTER on 2013-09-12 07:28
I need repair info for a John Deere RE64583 SCV Setup panel. Can you assist with this inquiry? Thank you.

—> Purchase or Repair:
#John Deere by Vasileios on 2011-01-12 08:23
Can you please confirm if the John Deere RE66821 Analog Tachometer is still supported or if there are replacement parts available? Thank you.

—> Purchase or Repair:
#John Deere by Robert Price on 2013-06-27 17:23
Can the John Deere RE63440 7SUD4JD03 SCV setup Panel be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Jimmy Ng on 2015-08-12 20:20
Hello, do you have a John Deere RE64583 7SUD3JD01 SCV Setup Panel available for sale or repair? Our production is currently down, and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#John Deere by Fracassi Roberto on 2013-08-03 20:32
Equipment down due to error code SCV Setup panel on John Deere RE64583 7SUD5JD04. Need urgent assistance to troubleshoot and rectify.

—> Purchase or Repair:
#John Deere by Al Schrock on 2013-05-25 15:24
Our John Deere RE64583 7SUD5JD04 is still down. Please provide assistance and get back to me as soon as possible. Thank you.

—> Purchase or Repair:
#John Deere by ketan. raval on 2013-04-20 22:05
John Deere Bale Trak Plus RE159944 not lighting up or displaying any information on the monitor.

—> Purchase or Repair:
#John Deere by Bryan Sutherland on 2013-08-12 11:32
Do you have a John Deere RE64583 7SUD5JD04 SCV setup panel available for sale or repair? It's urgent as we need to keep production running smoothly. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.