John Deere Service & Repair Forum

I have a John Deere RE219402 controller that is not functioning properly. The unit fails to power on and does not respond to any input commands. I have attempted to troubleshoot the issue by checking all connections and ensuring proper power supply, but the problem persists. Based on my assessment, the controller likely needs to be replaced. The estimated cost for a replacement John Deere RE219402 controller is approximately $300 to $500 based on current market rates. I am seeking repair service to address this issue

—> Purchase or Repair: Ticket Image

— Posted by Jacob Bergen on 2024-08-23

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by Vasileios on 2011-01-12 08:23
Can you please confirm if the John Deere RE66821 Analog Tachometer is still supported or if there are replacement parts available? Thank you.

—> Purchase or Repair:
#John Deere by Don Crawford on 2015-08-14 23:20
Hello, I need repair info for the John Deere RE66265 7MRT8JDO1E Digital Tachometer. It stopped working and we need a replacement. Please send details ASAP. Thank you!

—> Purchase or Repair:
#John Deere by audrey on 2014-12-28 13:06
John Deere RE43902 7MRT2JD02 controller not powering on.

—> Purchase or Repair:
#John Deere by Stith on 2014-12-25 19:06
Experiencing issues with my John Deere RE43902 7MRT2JD02 controller unit. Need repairs or troubleshooting assistance.

—> Purchase or Repair:
#John Deere by Edwin B. Tolentino on 2015-07-19 02:20
Please provide assistance with John Deere part number RE64583 7SUD5JD04 for the SCV Setup Panel. Thank you.

—> Purchase or Repair:
#John Deere by bill whitacre on 2013-07-29 02:32
Looks like we've got a problem with the SCV setup panel on the John Deere RE64583 7SUD5JD04. Drive or board failure, need immediate attention.

—> Purchase or Repair:
#John Deere by Abdulkader on 2015-08-06 06:20
The John Deere RE64583 7SUD5JD04 experienced downtime due to issues with the SCV Setup Panel. The incident occurred during our shift. Please provide insights on what went wrong before the next shift begins.

—> Purchase or Repair:
#John Deere by IVAN PUCH MEX on 2013-08-13 04:35
My John Deere Bale Trak Plus RE159944 isn't displaying any data or responding. Looking for a technician who can troubleshoot and repair it

—> Purchase or Repair:
#John Deere by V S yadav on 2015-07-28 08:20
Hello, I'm interested in the John Deere RE46704 7AT2JD01 part for a tach display. Could you please provide information on pricing and availability? I'm looking to source this unit quickly. Thank you.

—> Purchase or Repair:
#John Deere by RJ GARCIA on 2014-02-15 23:58
Hi there, we have a John Deere RE43902 7MRT2JD02 controller that stopped working and we need a replacement. Could you please provide us with the repair information for this part? We need a quick solution. Thank you!

—> Purchase or Repair:
#John Deere by XU on 2011-05-03 23:33
The John Deere RE66821 7AT6JD01 is an Analog Tachometer unit, but I'm new on the job and not fully familiar with its functions. Maintenance team reported it's not working.

—> Purchase or Repair:
#John Deere by Chidester on 2015-08-08 01:20
The John Deere RE49192 7THM2JD03 Tachometer is not functioning as expected.

—> Purchase or Repair:
#John Deere by Miguel Reyes on 2011-09-09 07:35
Please provide me with more information about the John Deere RE66821 7AT6JD01 Analog Tachometer. I need to know if it is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:
#John Deere by Kendra on 2014-07-29 05:24
RE43902 7MRT2JD02 showing error code 2143 Controller malfunction. Governor signal not received.

—> Purchase or Repair:
#John Deere by Marcy Berry on 2015-02-06 01:31
Can the John Deere AT320355 AT320694 CAN Monitor Unit be repaired or purchased as a replacement? I'm trying to address this

—> Purchase or Repair:
#John Deere by Johns on 2013-08-13 15:32
Hi there, we're needing repair info for a John Deere Bale Trak Plus RE159944 Bale Monitor. Can you help us out quickly? Thanks!

—> Purchase or Repair:
#John Deere by Allen Lamm on 2014-05-06 11:20
We experienced unexpected downtime on the John Deere RE64583 7SUD5JD04 due to issues with the motor control. The incident occurred during the night shift yesterday. Please provide urgent feedback before the next shift begins.

—> Purchase or Repair:
#John Deere by HELLENIC on 2013-05-13 23:20
Can you please provide information on whether the John Deere RE64583 7SUD5JD04 SCV setup panel is still supported and if replacement parts are available at this time? Thank you.

—> Purchase or Repair:
#John Deere by AVELLANEDA on 2015-07-05 21:58
The John Deere RE49192 Tachometer is not working.

—> Purchase or Repair:
#John Deere by Carmelo Cocuzza on 2013-08-16 04:01
Hello, I am interested in purchasing the John Deere RE64583 7SUD5JD04 SCV Setup panel. Could you please provide information regarding pricing and availability? I am trying to source one quickly. Thank you.

—> Purchase or Repair:
#John Deere by kian on 2015-01-11 12:41
Could this John Deere RE65483 7SUD5JD04 SCV Setup Panel be repaired or bought? Checking this off my to-do list.

—> Purchase or Repair:
#John Deere by Mon Torres on 2015-02-17 20:24
I need assistance with my John Deere AT320355 AT320694, which is a CAN Monitor Unit. It's an older unit, and we're unsure of the manufacturer. Can you please confirm if it's still supported or if replacement parts are available?

—> Purchase or Repair:
#John Deere by Martin Connor on 2015-07-30 07:20
I need assistance with my John Deere RE65483 7SUD5JD04 for the SCV Setup Panel. This unit caused downtime and I should report it as a shift supervisor. I need a quick answer regarding what happened and when before the next shift starts.

—> Purchase or Repair:
#John Deere by Tran Minh on 2013-02-25 12:48
Hello, I've noticed that the John Deere Bale Trak Plus RE159944 is displaying abnormal behavior. Instead of functioning as usual, it seems to be acting strangely. Thank you for looking into this issue for me.

—> Purchase or Repair:
#John Deere by adesh on 2013-06-12 23:59
The SCV Setup panel on the John Deere RE64583 7SUD5JD04 is malfunctioning, impacting the production line. Urgent repair service is needed to resolve this issue

—> Purchase or Repair:
#John Deere by Jerry Jos on 2014-12-15 09:44
Hello, I'm interested in purchasing the John Deere RE64583 7SUD3JD01 SCV Setup panel. Could you please provide me with information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#John Deere by Baleras on 2015-07-07 15:32
Can the SCV Setup Panel for the John Deere RE65483 7SUD5JD04 be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Eckmann on 2016-12-13 01:59
The John Deere RE172237 7VMU0JD01 Vehicle Monitor unit is not working.

—> Purchase or Repair:
#John Deere by Randy Opperman on 2013-08-15 14:01
Hi there, we are in need of repair info for a John Deere RE64583 7SUD5JD04 SCV Setup panel. Can you please provide us with assistance on this as soon as possible? Thank you!

—> Purchase or Repair:
#John Deere by JMartins on 2015-01-10 04:41
Do you have a John Deere RE66265 7MRT8JDO1E Digital Tachometer available for repair or purchase? Need one urgently to keep production running smoothly.

—> Purchase or Repair:
#John Deere by Mutha on 2013-05-17 11:54
Could you please confirm if the John Deere RE63440 7SUD4JD03 SCV setup Panel is still supported or if replacement parts are available? Thank you!

—> Purchase or Repair:
#John Deere by VERAIN on 2015-07-27 22:20
The John Deere RE49192 7THM2JD03 tachometer is displaying inconsistent readings and is fluctuating erratically, making it difficult to accurately measure engine RPM. It may need to be inspected and possibly replaced to ensure proper functioning.

—> Purchase or Repair:
#John Deere by jianxin on 2013-07-17 10:55
Hello, I'm interested in purchasing the John Deere RE63440 7SUD4JD03 SCV setup Panel. Could you provide information about pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#John Deere by Van on 2021-06-18 00:00
Experiencing issues with my John Deere RE528702 controller - not responding. Need assistance ASAP.

—> Purchase or Repair:
#John Deere by Senthil on 2015-08-09 23:20
The John Deere RE64583 7SUD5JD04 SCV Setup Panel is not functioning as expected. The unit is displaying unusual behavior, which is different from its normal operation.

—> Purchase or Repair:
#John Deere by Fracassi Roberto on 2013-08-03 20:32
Equipment down due to error code SCV Setup panel on John Deere RE64583 7SUD5JD04. Need urgent assistance to troubleshoot and rectify.

—> Purchase or Repair:
#John Deere by Goecker on 2014-11-21 21:12
Looking for repair services for my John Deere RE43902 7MRT2JD02 controller. The unit is failing to power up properly and needs immediate attention. Thank you.

—> Purchase or Repair:
#John Deere by FRANK on 2015-07-14 15:20
Equipment down with error code SCV Setup Panel on John Deere RE65483 7SUD5JD04. Need urgent assistance to diagnose and fix the issue.

—> Purchase or Repair:
#John Deere by Ansarudi on 2014-12-15 19:44
Please provide an update on our John Deere RE64583 7SUD3JD01 with the SCV Setup panel. The unit is still down. We need assistance urgently.

—> Purchase or Repair:
#John Deere by Geagea on 2015-07-26 04:20
Issue with John Deere RE46704 7AT2JD01 - Tach Display doesn't come on when cold. Likely a failed drive or board.

—> Purchase or Repair:
#John Deere by Gary Wolfe on 2015-08-15 01:20
Hey there, could you please provide repair info for a John Deere RE64583 7SUD3JD01 SCV Setup Panel that stopped working? We need the replacement part urgently. Thank you!

—> Purchase or Repair:
#John Deere by Chris Norwood on 2013-08-07 09:32
Hello, I hope this message finds you well. I am interested in purchasing the John Deere RE64583 7SUD5JD04 SCV Setup panel. Could you please provide information on pricing and availability? I am looking to source one quickly and would appreciate any assistance you can offer. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Eleanor on 2015-01-08 11:41
the John Deere RE66265 7MRT8JDO1E digital tachometer unit went down mid-shift. Needs attention ASAP.

—> Purchase or Repair:
#John Deere by Basson on 2013-03-20 09:49
The Bale Trak Plus RE159944 is displaying error code E01.

—> Purchase or Repair:
#John Deere by Malay Mandal on 2015-07-11 03:20
It seems like there might be an issue with the CAN Monitor Unit on the John Deere AT320355 AT320694. I'm not entirely sure what that part does specifically, but it looks like it may have stopped working. We should probably have a technician take a look to diagnose the problem accurately. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Fred Coster on 2013-04-28 13:18
The John Deere RE64583 7SUD5JD04 is not functioning properly. Please check the SCV Setup panel.

—> Purchase or Repair:
#John Deere by linville on 2015-08-01 00:20
Hello, I'm reaching out regarding the John Deere RE65483 7SUD5JD04 SCV Setup Panel. Could you please confirm if this can be repaired or needs to be replaced? I'm trying to address this

—> Purchase or Repair:
#John Deere by annmarie on 2014-11-01 01:57
Are you able to repair the John Deere RE64583 7SUD5JD04 motor control unit, or do you have a replacement available for sale? It's urgent to keep production running.

—> Purchase or Repair:
#John Deere by christian lahoud on 2013-07-13 23:57
Do you have a replacement John Deere RE63440 7SUD4JD03 SCV setup Panel available? It's critical for keeping production running smoothly. Thank you.

—> Purchase or Repair:
#John Deere by annamaria paliotti on 2016-11-07 03:44
Can you please confirm if the John Deere 120974T AT167497 monitor is still supported, and if it is, are replacement parts available for it? Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.