John Deere Service & Repair Forum

Can you please confirm if the John Deere RE66821 Analog Tachometer is still supported or if there are replacement parts available? Thank you.

—> Purchase or Repair: Ticket Image

— Posted by Vasileios on 2011-01-12

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by dennis noto on 2013-08-07 00:00
John Deere AE 48107 Bale-Trak Monitor not displaying any data. Need a repair technician to fix the issue

—> Purchase or Repair:
#John Deere by Fracassi Roberto on 2013-08-03 20:32
Equipment down due to error code SCV Setup panel on John Deere RE64583 7SUD5JD04. Need urgent assistance to troubleshoot and rectify.

—> Purchase or Repair:
#John Deere by Gary Wolfe on 2015-08-15 01:20
Hey there, could you please provide repair info for a John Deere RE64583 7SUD3JD01 SCV Setup Panel that stopped working? We need the replacement part urgently. Thank you!

—> Purchase or Repair:
#John Deere by Damien on 2013-07-24 09:32
The John Deere RE63440 7SUD4JD03 SCV setup Panel experienced a malfunction causing downtime on . Seeking quick resolution before the next shift, please advise on the issue. Thank you.

—> Purchase or Repair:
#John Deere by Arturo Arriaga Solorio on 2013-04-16 10:25
I've noticed that the SCV Setup panel on your John Deere RE64583 7SUD5JD04 is not functioning properly. It seems like something might have stopped working correctly. I recommend reaching out to a technician or consulting the user manual for troubleshooting guidance.

—> Purchase or Repair:
#John Deere by Garay on 2013-03-11 01:53
Hi team, the John Deere Bale Trak Plus RE159944 is down; need someone to check it out during the day. Thanks!

—> Purchase or Repair:
#John Deere by Mat Eicher on 2011-06-23 15:36
Can the John Deere RE66821 7AT6JD01 Analog Tachometer be repaired or replaced? I'm looking to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Martin Connor on 2015-07-30 07:20
I need assistance with my John Deere RE65483 7SUD5JD04 for the SCV Setup Panel. This unit caused downtime and I should report it as a shift supervisor. I need a quick answer regarding what happened and when before the next shift starts.

—> Purchase or Repair:
#John Deere by Nikita on 2013-07-23 20:32
SCV setup Panel on John Deere RE63440 7SUD4JD03 is not responding.

—> Purchase or Repair:
#John Deere by Chidester on 2015-08-08 01:20
The John Deere RE49192 7THM2JD03 Tachometer is not functioning as expected.

—> Purchase or Repair:
#John Deere by adesh on 2013-06-12 23:59
The SCV Setup panel on the John Deere RE64583 7SUD5JD04 is malfunctioning, impacting the production line. Urgent repair service is needed to resolve this issue

—> Purchase or Repair:
#John Deere by JR TECHNO PRODUCTS on 2015-08-07 20:20
Tach display on RE46704 not working when cold, likely due to a failed drive or board. Need to address this issue with troubleshooting.

—> Purchase or Repair:
#John Deere by DARLENE CARTER on 2013-09-12 07:28
I need repair info for a John Deere RE64583 SCV Setup panel. Can you assist with this inquiry? Thank you.

—> Purchase or Repair:
#John Deere by Geagea on 2015-07-26 04:20
Issue with John Deere RE46704 7AT2JD01 - Tach Display doesn't come on when cold. Likely a failed drive or board.

—> Purchase or Repair:
#John Deere by Bernd on 2011-11-15 16:47
I'm sorry to hear about the issue with your John Deere RE66821 7AT6JD01 Analog Tachometer. It seems like something may have stopped working properly. I recommend reaching out to a technician for a detailed evaluation.

—> Purchase or Repair:
#John Deere by s b sharma on 2015-07-31 05:20
I believe there's an issue with the digital tachometer on the John Deere RE66265 7MRT8JDO1E. It seems like the digital display has stopped working properly. Would you like me to investigate further or seek help from a technician?

—> Purchase or Repair:
#John Deere by Osvaldo on 2013-08-11 03:35
Can the John Deere RE64583 7SUD5JD04 SCV Setup panel be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Jarrett on 2013-02-05 13:30
The John Deere Bale Trak Plus RE159944 is displaying error code E001. The monitor is unresponsive and not displaying any bale tracking information. Need urgent assistance to troubleshoot and resolve the issue.

—> Purchase or Repair:
#John Deere by Senthil on 2015-08-09 23:20
The John Deere RE64583 7SUD5JD04 SCV Setup Panel is not functioning as expected. The unit is displaying unusual behavior, which is different from its normal operation.

—> Purchase or Repair:
#John Deere by Eddie Samaniego on 2015-04-27 18:58
I can assist you with that. I will check if the John Deere RE66265 7MRT8JDO1E digital tachometer is still supported or if replacement parts are available.

—> Purchase or Repair:
#John Deere by Jonathan Collie on 2013-08-07 02:32
Hey, the John Deere Bale Trak Plus RE159944 monitor unit went down mid-shift. Needs attention before next use. Please check and fix asap. Thanks!

—> Purchase or Repair:
#John Deere by Torp on 2015-01-10 05:41
I understand that the CAN Monitor Unit in your John Deere AT320355 AT320694 is not functioning properly. The exact issue with the machine is unclear, but we will do our best to assist you and resolve the problem as soon as possible. Thank you for bringing this to our attention. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Fred Coster on 2013-04-28 13:18
The John Deere RE64583 7SUD5JD04 is not functioning properly. Please check the SCV Setup panel.

—> Purchase or Repair:
#John Deere by Edwin B. Tolentino on 2015-07-19 02:20
Please provide assistance with John Deere part number RE64583 7SUD5JD04 for the SCV Setup Panel. Thank you.

—> Purchase or Repair:
#John Deere by Pat Rumsey on 2014-12-22 03:44
The John Deere RE64583 7SUD3JD01 SCV Setup panel is not working.

—> Purchase or Repair:
#John Deere by Len Minor on 2013-04-10 20:34
John Deere Bale Trak Plus RE159944 board/drive failure on Bale Monitor. Needs immediate attention to restore functionality.

—> Purchase or Repair:
#John Deere by Leslie on 2013-11-30 12:36
Hello, following up on my previous message regarding the John Deere RE64583 unit. It's still down. I urgently need assistance to resolve the issue. Please respond

—> Purchase or Repair:
#John Deere by Braun on 2014-04-14 09:32
The John Deere RE64583 7SUD3JD01 SCV Setup panel is displaying erratic behavior and not functioning as expected.

—> Purchase or Repair:
#John Deere by Jimmi on 2013-08-12 23:32
The SCV Setup panel on John Deere RE64583 7SUD5JD04 is malfunctioning, affecting the line. Urgently need repair service to address the issue and get production back on track.

—> Purchase or Repair:
#John Deere by Edge on 2025-05-20 18:29
Hello, my John Deere BCU AL165751 controller is malfunctioning. Looking for repairs ASAP. Any technicians available? Thank you.

—> Purchase or Repair:
#John Deere by LEPOINT on 2013-03-16 14:15
I have a John Deere Bale Trak Plus RE159944 that is not displaying any information on the monitor. Looking for a repair specialist who can troubleshoot and fix the issue

—> Purchase or Repair:
#John Deere by sergio garcia on 2019-08-23 21:44
: Our industrial oven has stopped working properly. It will turn on but won't heat up consistently and is fluctuating between high and low temperature ranges. This issue prevents us from completing our baking tasks efficiently, which significantly impacts production deadlines and quality control. Ba…Purchase or Repair: Ticket Image...
Show More
#John Deere by Filippelli on 2013-04-09 08:52
The John Deere RE64583 7SUD5JD04 SCV Setup panel is not working.

—> Purchase or Repair:
#John Deere by Neill on 2013-08-03 03:32
The John Deere RE64583 7SUD5JD04 SCV setup panel seems to be experiencing unusual behavior in the warehouse. It is not functioning as it normally does, displaying strange actions that are out of the ordinary.

—> Purchase or Repair:
#John Deere by ARUMOY CHATTERJEE on 2011-04-07 15:48
John Deere RE66821 7AT6JD01 Analog Tachometer issue Drive or board failure. Requires immediate troubleshooting and replacement.

—> Purchase or Repair:
#John Deere by orhan on 2015-07-14 04:20
Hello, I need assistance with John Deere parts AT320355 and AT320694, which are CAN Monitor Units. Can you provide information on troubleshooting and repairs for these parts? Thank you.

—> Purchase or Repair:
#John Deere by cotrus on 2015-07-13 10:20
Please follow up immediately regarding the John Deere AT320355 AT320694 CAN Monitor Unit. It is still not functioning, and we need a resolution as soon as possible.

—> Purchase or Repair:
#John Deere by OliverAtmob on 2017-06-24 00:00
John Deere ECU 70842 displaying error code A-0530G12, unable to power on or communicate with equipment properly. Need repairs on the controller unit urgently.

—> Purchase or Repair:
#John Deere by David Wilhelm on 2026-02-05 06:57
Request Service for John DeereModel/Part : Re208064 DisplayCrossed the battery leads which burned the fusable link. After that event the gauges work, but are not accurate or repeatable.

—> Purchase or Repair:
#John Deere by Kelly B Adams on 2015-07-27 09:20
The John Deere RE65483 7SUD5JD04 unit is related to the SCV Setup Panel and is currently not functioning as expected. That's the information I have at the moment.

—> Purchase or Repair:
#John Deere by Ravikumar Jadhav on 2013-11-07 23:37
Unit John Deere RE64583 7SUD5JD04 experienced downtime due to a malfunction in the SCV Setup panel. The issue occurred at 1030 AM today, and we are currently awaiting an analysis to determine the cause. Please advise

—> Purchase or Repair:
#John Deere by Leonardo Jose Fueyo on 2015-07-30 01:20
Can you please assist in checking whether the John Deere AT320355 AT320694 CAN Monitor Unit is still supported or if replacement parts are available? It's an older unit, and we are unsure about its manufacturer. Thank you.

—> Purchase or Repair:
#John Deere by chris siberas on 2009-08-20 00:00
I am having issues with my John Deere AH2244250 Electronic Control unit. It is not responding to inputs or displaying any data. Looking for a repair service as soon as possible.

—> Purchase or Repair:
#John Deere by Fitim Cena on 2014-12-24 07:06
The John Deere RE64583 7SUD3JD01 is not functioning correctly. It relates to the SCV Setup panel, although I am unsure of its exact purpose as I am new to the role.

—> Purchase or Repair:
#John Deere by calvin haines on 2010-08-15 13:28
The unit with the digital display (John Deere Motorola RE64583) in the warehouse is exhibiting abnormal behavior. The display is flickering intermittently, and some of the buttons are not responding properly. It seems to be freezing up occasionally as well.

—> Purchase or Repair:
#John Deere by Secor on 2013-08-12 03:32
I'm sorry to hear about the issue with your John Deere RE64583 7SUD5JD04. It seems like there might be a problem with the SCV setup panel. I recommend contacting a technician for a detailed inspection and repair.

—> Purchase or Repair:
#John Deere by Arain on 2015-07-07 21:32
I have a John Deere RE49192 7THM2JD03 Tachometer that's not working and needs repair. Looking for a technician who can troubleshoot and fix the issue

—> Purchase or Repair:
#John Deere by claudia on 2014-12-16 15:44
Please advise if the John Deere RE43902 7MRT2JD02 controller is still supported or if replacement parts are available for this unit. Thank you.

—> Purchase or Repair:
#John Deere by Al Schrock on 2013-08-13 10:35
Could you please confirm if the John Deere RE64583 7SUD5JD04 SCV setup panel is still supported and if replacement parts are available? Your

—> Purchase or Repair:
#John Deere by Siddiqui on 2015-01-12 19:41
Please provide an update on the repair status of the John Deere RE66265 Digital Tachometer (7MRT8JDO1E) immediately. Your

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.