John Deere for Service call 1-336-969-0110 at Industrial Electronics Repair

John Deere Service & Repair Forum

Hi there, we have a John Deere RE43902 7MRT2JD02 controller that stopped working and we need a replacement. Could you please provide us with the repair information for this part? We need a quick solution. Thank you!

—> Purchase or Repair:

— Posted by RJ GARCIA on 2014-02-15

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "John Deere"

John Deere → John Deere RE66821 7AT6JD01 ↗
John Deere → John Deere RE64583 7SUD5JD04 ↗
John Deere → John Deere MOTOROLA RE64583 ↗
John Deere → John Deere RE63440 7SUD4JD03 ↗
John Deere → John Deere BALE TRAK PLUS RE159944 ↗

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 329 Comments

#John Deere by Danladi A Birdling on 2015-08-17 00:00

Assistance Required for John Deere A336395 Joystick ControllerHello ,Im reaching out on behalf of someone in the shop who needs help with the John Deere A336395 Joystick Controller. They mentioned that it's currently not working. Could you please provide guidance or assistance to resolve this issue?…Purchase or Repair:

#John Deere by AVELLANEDA on 2015-07-05 21:58

The John Deere RE49192 Tachometer is not working.

—> Purchase or Repair:

#John Deere by Mauro De Simone on 2014-04-04 22:29

The John Deere RE64583 7SUD3JD01 SCV Setup panel is not working in the shop.

—> Purchase or Repair:

#John Deere by cotrus on 2015-07-13 10:20

Please follow up immediately regarding the John Deere AT320355 AT320694 CAN Monitor Unit. It is still not functioning, and we need a resolution as soon as possible.

—> Purchase or Repair:

#John Deere by JiaJun Huo on 2015-03-31 08:04

Please provide an update on the status of my John Deere RE46704 7AT2JD01 with the issue of the Tach Display not turning on when cold. This problem needs immediate attention in order to get the unit back up and running. Your

—> Purchase or Repair:

#John Deere by brian egan on 2014-01-07 11:22

The John Deere RE64583 7SUD5JD04 is displaying ERROR CODE 305 - MOTOR CONTROL FAILURE. Equipment is currently down, urgent assistance needed.

—> Purchase or Repair:

#John Deere by Don Crawford on 2015-08-14 23:20

Hello, I need repair info for the John Deere RE66265 7MRT8JDO1E Digital Tachometer. It stopped working and we need a replacement. Please send details ASAP. Thank you!

—> Purchase or Repair:

#John Deere by SINGHAL on 2015-02-23 03:47

John Deere RE64583 7SUD5JD04 SCV Setup Panel not responding.

—> Purchase or Repair:

#John Deere by doug dakin on 2013-01-11 20:25

I need more information in order to help you effectively.

—> Purchase or Repair:

#John Deere by Petr on 2010-10-19 09:54

Experiencing display issues with my John Deere Motorola RE64583. Need help fixing it

—> Purchase or Repair:

#John Deere by Ferguson on 2013-02-10 16:39

The John Deere RE63440 7SUD4JD03 is the SCV setup Panel, but I am still learning about its function. I will pass along this information to the maintenance team for further assessment.

—> Purchase or Repair:

#John Deere by Johns on 2013-08-13 15:32

Hi there, we're needing repair info for a John Deere Bale Trak Plus RE159944 Bale Monitor. Can you help us out quickly? Thanks!

—> Purchase or Repair:

#John Deere by chris siberas on 2009-08-20 00:00

I am having issues with my John Deere AH2244250 Electronic Control unit. It is not responding to inputs or displaying any data. Looking for a repair service as soon as possible.

—> Purchase or Repair:

#John Deere by Michael Groll on 2025-06-03 19:00

I can definitely help you with that. I'll reach out to inquire about the support and availability of parts for the John Deere RE218346 controller.

—> Purchase or Repair:

#John Deere by gang on 2016-06-01 06:22

John Deere RE172237 7VMU0JD01 Vehicle Monitor Not displaying any data or responding to inputs.

—> Purchase or Repair:

#John Deere by Preston on 2015-09-30 01:00

The tach display on the John Deere RE46704 7AT2JD01 is not functioning when cold. This issue needs urgent attention to avoid disruptions to production. Please address the failing tach display

—> Purchase or Repair:

#John Deere by Kanishka Weerathunge on 2015-04-23 21:05

John Deere RE65483 7SUD5JD04 showing error message "SCV Setup Panel Malfunction" - production halted.

—> Purchase or Repair:

#John Deere by LEPOINT on 2013-03-16 14:15

I have a John Deere Bale Trak Plus RE159944 that is not displaying any information on the monitor. Looking for a repair specialist who can troubleshoot and fix the issue

—> Purchase or Repair:

#John Deere by Leung on 2015-08-05 10:20

The John Deere RE64583 7SUD5JD04 is a SCV Setup Panel that isn't working. The maintenance team needs to take a look at it.

—> Purchase or Repair:

#John Deere by colvin on 2016-09-06 08:36

Hello, I'm interested in purchasing a John Deere RE69212 7TCU5JD01 Controller. I'm not 100% certain if this is the right model, but my team recommended reaching out to inquire. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you.—> …Purchase or Repair:

#John Deere by Ravikumar Jadhav on 2013-11-07 23:37

Unit John Deere RE64583 7SUD5JD04 experienced downtime due to a malfunction in the SCV Setup panel. The issue occurred at 1030 AM today, and we are currently awaiting an analysis to determine the cause. Please advise

—> Purchase or Repair:

#John Deere by larry palmer on 2025-06-08 07:22

Do you have a John Deere RE218346 controller available for sale or for repair? Need it urgently to keep production running.

—> Purchase or Repair:

#John Deere by Arturo Arriaga Solorio on 2013-04-16 10:25

I've noticed that the SCV Setup panel on your John Deere RE64583 7SUD5JD04 is not functioning properly. It seems like something might have stopped working correctly. I recommend reaching out to a technician or consulting the user manual for troubleshooting guidance.

—> Purchase or Repair:

#John Deere by Hjeresen on 2015-07-23 06:43

The John Deere RE64583 7SUD5JD04 SCV Setup Panel unit isn't working.

—> Purchase or Repair:

#John Deere by VIJAY PATEL on 2015-07-23 11:43

The John Deere RE66265 7MRT8JDO1E Digital Tachometer is displaying abnormal behavior - it is not functioning as expected.

—> Purchase or Repair:

#John Deere by vbaskar on 2011-06-13 13:22

John Deere RE66821 7AT6JD01 Analog Tachometer drive or board just failed. Needs replacement ASAP.

—> Purchase or Repair:

#John Deere by John Richards on 2014-02-12 02:58

The unit RE64583 7SUD3JD01 is not working properly. It is related to the SCV Setup panel.

—> Purchase or Repair:

#John Deere by Swanepoel on 2011-04-11 19:20

The John Deere RE66821 7AT6JD01 analog tachometer unit is not working.

—> Purchase or Repair:

#John Deere by Jimmi on 2013-08-12 23:32

The SCV Setup panel on John Deere RE64583 7SUD5JD04 is malfunctioning, affecting the line. Urgently need repair service to address the issue and get production back on track.

—> Purchase or Repair:

#John Deere by Roslin on 2025-06-03 23:52

Can the John Deere RE551415 controller be repaired, or should it be replaced? I'm trying to get this fixed or replaced to check it off my to-do list. Thank you.

—> Purchase or Repair:

#John Deere by christian lahoud on 2013-07-13 23:57

Do you have a replacement John Deere RE63440 7SUD4JD03 SCV setup Panel available? It's critical for keeping production running smoothly. Thank you.

—> Purchase or Repair:

#John Deere by Goecker on 2014-11-21 21:12

Looking for repair services for my John Deere RE43902 7MRT2JD02 controller. The unit is failing to power up properly and needs immediate attention. Thank you.

—> Purchase or Repair:

#John Deere by Derek Baker on 2016-03-23 17:19

John Deere 120974T AT167497 Monitor is malfunctioning, impacting production line efficiency. Urgent repair needed to resume operations

—> Purchase or Repair:

#John Deere by breslin on 2013-08-12 02:32

Equipment down with error code displayed on John Deere RE64583 SCV Setup panel. Need urgent assistance troubleshooting issue to resume operation.

—> Purchase or Repair:

#John Deere by Juan Galvez on 2016-10-07 03:24

John Deere 120974T AT167497 Monitor not displaying any data.

—> Purchase or Repair:

#John Deere by Abdulkader on 2015-08-06 06:20

The John Deere RE64583 7SUD5JD04 experienced downtime due to issues with the SCV Setup Panel. The incident occurred during our shift. Please provide insights on what went wrong before the next shift begins.

—> Purchase or Repair:

#John Deere by Frank Taylor on 2015-07-17 09:20

I'm currently experiencing some issues with the SCV Setup Panel on my John Deere RE65483 7SUD5JD04. Something seems to have stopped working and I'm not sure how to fix it. Your assistance in resolving this matter would be greatly appreciated.

—> Purchase or Repair:

#John Deere by wargin on 2015-08-13 10:20

Equipment down with John Deere RE66265 Digital Tachometer displaying error code E003. Need immediate assistance to troubleshoot and resolve issue.

—> Purchase or Repair:

#John Deere by George Hostutler on 2013-04-05 19:37

The John Deere RE64583 7SUD5JD04 is displaying error code E342. The SCV setup panel is unresponsive, preventing operation of the equipment. Please advise on troubleshooting steps or necessary repairs. Thank you.

—> Purchase or Repair:

#John Deere by Mutha on 2013-05-17 11:54

Could you please confirm if the John Deere RE63440 7SUD4JD03 SCV setup Panel is still supported or if replacement parts are available? Thank you!

—> Purchase or Repair:

#John Deere by Randy Opperman on 2013-08-15 14:01

Hi there, we are in need of repair info for a John Deere RE64583 7SUD5JD04 SCV Setup panel. Can you please provide us with assistance on this as soon as possible? Thank you!

—> Purchase or Repair:

#John Deere by sergio garcia on 2019-08-23 21:44

: Our industrial oven has stopped working properly. It will turn on but won't heat up consistently and is fluctuating between high and low temperature ranges. This issue prevents us from completing our baking tasks efficiently, which significantly impacts production deadlines and quality control. Ba…Purchase or Repair:

#John Deere by wes wilhour on 2011-12-25 18:07

the John Deere RE66821 7AT6JD01 Analog Tachometer unit went down mid-shift. Needs attention ASAP!

—> Purchase or Repair:

#John Deere by Thomas wood on 2015-03-26 11:20

The John Deere RE66265 Digital Tachometer is not working.

—> Purchase or Repair:

#John Deere by Dan Arrington on 2014-10-31 23:57

Hi there, could you please provide repair info for a John Deere RE64583 7SUD5JD04 motor control? It stopped working and we need to find a replacement. Thanks!

—> Purchase or Repair:

#John Deere by Miguel Reyes on 2011-09-09 07:35

Please provide me with more information about the John Deere RE66821 7AT6JD01 Analog Tachometer. I need to know if it is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:

#John Deere by Martin Connor on 2015-07-30 07:20

I need assistance with my John Deere RE65483 7SUD5JD04 for the SCV Setup Panel. This unit caused downtime and I should report it as a shift supervisor. I need a quick answer regarding what happened and when before the next shift starts.

—> Purchase or Repair:

#John Deere by dewi puspa on 2015-12-11 13:15

The Tach Display on John Deere RE46704 7AT2JD01 doesn't come on when cold.

—> Purchase or Repair:

#John Deere by Mario Orta on 2014-12-18 14:44

Hello, I'm reaching out on behalf of my client who needs assistance with a John Deere RE64583 7SUD5JD04. The description mentions an issue with the motor control. Can you provide more information on troubleshooting or repairing this part? Thank you.

—> Purchase or Repair:

#John Deere by perea on 2015-02-22 19:47

Do you have a John Deere RE64583 7SUD3JD01 SCV Setup Panel available for purchase or repair? Need it urgently to keep production running smoothly.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.