John Deere Service & Repair Forum

Hello, we're in need of repair information for a John Deere AT320355 AT320694. It's a CAN Monitor Unit that stopped working. Can you please provide the details as soon as possible? Thank you.

—> Purchase or Repair: Ticket Image

— Posted by TFI on 2015-03-16

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by Dimitar on 2013-02-05 12:30
Please provide more details about the John Deere RE63440 7SUD4JD03 SCV setup Panel so that we can check if it's still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:
#John Deere by S.RAVINDRANATH on 2013-03-25 15:32
I am following up on my previous message regarding the John Deere RE63440 7SUD4JD03 unit being down. Please provide assistance

—> Purchase or Repair:
#John Deere by Mathias on 2013-07-26 02:32
John Deere RE63440 7SUD4JD03 SCV setup Panel down mid-shift. Please check it out in the morning.

—> Purchase or Repair:
#John Deere by Mulinge on 2014-02-15 11:58
Hello, the John Deere RE64583 7SUD3JD01 is displaying error code 7SUD3JD01 on the SCV Setup panel. The equipment is currently down and not functioning. Please advise on next steps to resolve the issue

—> Purchase or Repair:
#John Deere by Steve Block on 2015-07-16 10:20
Hello, I am inquiring about the John Deere RE66265 7MRT8JDO1E Digital Tachometer. Our team is looking for information on whether this unit is still supported and if replacement parts are available. Could you please provide us with information regarding the current status of this model? Thank you. —>…Purchase or Repair: Ticket Image...
Show More
#John Deere by Eleanor on 2015-01-08 11:41
the John Deere RE66265 7MRT8JDO1E digital tachometer unit went down mid-shift. Needs attention ASAP.

—> Purchase or Repair:
#John Deere by Ginsburg on 2013-02-19 06:27
I will send a message regarding the non-functioning John Deere RE64583 7SUD5JD04 unit.

—> Purchase or Repair:
#John Deere by IVAN PUCH MEX on 2013-08-13 04:35
My John Deere Bale Trak Plus RE159944 isn't displaying any data or responding. Looking for a technician who can troubleshoot and repair it

—> Purchase or Repair:
#John Deere by kian on 2015-01-11 12:41
Could this John Deere RE65483 7SUD5JD04 SCV Setup Panel be repaired or bought? Checking this off my to-do list.

—> Purchase or Repair:
#John Deere by brian egan on 2014-01-07 11:22
The John Deere RE64583 7SUD5JD04 is displaying ERROR CODE 305 - MOTOR CONTROL FAILURE. Equipment is currently down, urgent assistance needed.

—> Purchase or Repair:
#John Deere by Mario Orta on 2014-12-18 14:44
Hello, I'm reaching out on behalf of my client who needs assistance with a John Deere RE64583 7SUD5JD04. The description mentions an issue with the motor control. Can you provide more information on troubleshooting or repairing this part? Thank you.

—> Purchase or Repair:
#John Deere by Les Abend on 2015-08-08 05:20
Could you please provide repair information for a John Deere RE64583 7SUD5JD04 SCV Setup Panel? We need a replacement part urgently, but can't locate one. Your

—> Purchase or Repair:
#John Deere by Jonathan Collie on 2013-08-07 02:32
Hey, the John Deere Bale Trak Plus RE159944 monitor unit went down mid-shift. Needs attention before next use. Please check and fix asap. Thanks!

—> Purchase or Repair:
#John Deere by Nick Oshana on 2015-02-28 04:07
The John Deere RE64583 is displaying an SCV Setup Panel error. Unable to engage or control SCVs. Equipment is down. Need assistance urgently.

—> Purchase or Repair:
#John Deere by Tran Minh on 2013-02-25 12:48
Hello, I've noticed that the John Deere Bale Trak Plus RE159944 is displaying abnormal behavior. Instead of functioning as usual, it seems to be acting strangely. Thank you for looking into this issue for me.

—> Purchase or Repair:
#John Deere by msuya on 2015-02-14 05:13
Can the John Deere RE64583 7SUD5JD04 SCV Setup Panel be repaired or purchased? I am trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Ivan Alarcon on 2014-12-25 05:06
It seems like there may be an issue with the motor control on your John Deere RE64583. Something seems to have stopped working properly, but I'll do my best to help you figure out what's going on. Let's work together to troubleshoot and get your machine back in good working order. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Dorothy on 2015-08-14 01:20
Unit RE65483 7SUD5JD04 is down due to SCV Setup Panel issue. Please check and fix it during the day shift. Thank you!

—> Purchase or Repair:
#John Deere by HELLENIC on 2013-05-13 23:20
Can you please provide information on whether the John Deere RE64583 7SUD5JD04 SCV setup panel is still supported and if replacement parts are available at this time? Thank you.

—> Purchase or Repair:
#John Deere by FARHAT on 2013-04-12 00:15
Hello, I am inquiring about the John Deere RE64583 7SUD5JD04 SCV Setup panel. Is this unit still supported, and are replacement parts available for it? Thank you.

—> Purchase or Repair:
#John Deere by GONDAL on 2013-03-03 03:30
Hello, I'm reaching out on behalf of a client who is having an issue with a John Deere RE64583 part located in the SCV Setup panel of their equipment. They are encountering some problems and would like to get more information on troubleshooting and repairing this part. Would you be able to assist wi…Purchase or Repair: Ticket Image...
Show More
#John Deere by bill whitacre on 2013-07-29 02:32
Looks like we've got a problem with the SCV setup panel on the John Deere RE64583 7SUD5JD04. Drive or board failure, need immediate attention.

—> Purchase or Repair:
#John Deere by LIM WEI SIANG on 2013-04-12 08:15
The John Deere Bale Trak Plus RE159944, which I believe is a Bale Monitor, seems to have stopped working. I'm not clear on the specifics of its functions, but it appears there is an issue that needs attention.

—> Purchase or Repair:
#John Deere by sonnico on 2015-08-12 17:20
My client is experiencing an issue with part number RE46704 7AT2JD01 where the tach display doesn't come on when cold. Can you provide guidance on troubleshooting and potentially fixing this problem? Thank you.

—> Purchase or Repair:
#John Deere by FERNANDO ALVAREZ on 2016-12-10 13:00
The John Deere RE172237 7VMU0JD01 Vehicle Monitor isn't working properly.

—> Purchase or Repair:
#John Deere by fatah on 2015-07-12 16:20
Hi there, we have a John Deere RE66265 Digital Tachometer that needs repair or replacement. Can you provide guidance on how to fix it or where to find a replacement part? Please reply ASAP. Thank you!

—> Purchase or Repair:
#John Deere by vbaskar on 2011-06-13 13:22
John Deere RE66821 7AT6JD01 Analog Tachometer drive or board just failed. Needs replacement ASAP.

—> Purchase or Repair:
#John Deere by Ghanshyam on 2015-08-01 17:20
The John Deere RE66265 7MRT8JDO1E digital tachometer is displaying abnormal behavior. It is not functioning as it typically does.

—> Purchase or Repair:
#John Deere by Leslie on 2013-11-30 12:36
Hello, following up on my previous message regarding the John Deere RE64583 unit. It's still down. I urgently need assistance to resolve the issue. Please respond

—> Purchase or Repair:
#John Deere by Ravikumar Jadhav on 2013-11-07 23:37
Unit John Deere RE64583 7SUD5JD04 experienced downtime due to a malfunction in the SCV Setup panel. The issue occurred at 1030 AM today, and we are currently awaiting an analysis to determine the cause. Please advise

—> Purchase or Repair:
#John Deere by Enzo lezzi on 2020-02-08 00:00
Urgent Repair Needed for John Deere RE81075 ControllerHi, we are experiencing issues with our John Deere RE81075 - the controller is not responding and displaying error code E123. Equipment is currently down, affecting operations. Please advise on urgent repair action required. Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Stith on 2014-12-25 19:06
Experiencing issues with my John Deere RE43902 7MRT2JD02 controller unit. Need repairs or troubleshooting assistance.

—> Purchase or Repair:
#John Deere by Dave Lorenzo on 2013-02-27 10:47
Looking for repair help for my John Deere RE64583 7SUD5JD04 SCV Setup panel. The unit is not responding to inputs, causing operational issues. Need immediate assistance.

—> Purchase or Repair:
#John Deere by Bateman on 2014-01-18 03:45
The John Deere RE43902 controller is not working. Please check and repair as needed.

—> Purchase or Repair:
#John Deere by Gary Wolfe on 2015-08-15 01:20
Hey there, could you please provide repair info for a John Deere RE64583 7SUD3JD01 SCV Setup Panel that stopped working? We need the replacement part urgently. Thank you!

—> Purchase or Repair:
#John Deere by AVELLANEDA on 2015-07-05 21:58
The John Deere RE49192 Tachometer is not working.

—> Purchase or Repair:
#John Deere by Rheal Guilbault on 2013-08-13 01:32
Bale Trak Plus RE159944 unit malfunctioned mid-shift. Please check and repair tomorrow.

—> Purchase or Repair:
#John Deere by Nikolay Georgiev on 2015-07-17 21:20
The tachometer on John Deere RE49192 7THM2JD03 is not working.

—> Purchase or Repair:
#John Deere by Suliman on 2015-03-09 12:13
Looking for repair for John Deere RE66265 digital tachometer. The unit is not displaying any readings and seems completely dead. Need assistance from a professional technician.

—> Purchase or Repair:
#John Deere by tuan truong on 2015-01-12 12:41
The CAN Monitor Unit on the John Deere AT320355 AT320694 is malfunctioning, causing a disruption in the production line. Immediate attention is needed to resolve this issue efficiently and resume operations swiftly.

—> Purchase or Repair:
#John Deere by jackpot18 on 2013-02-08 03:18
Hello, I need repair info for John Deere RE63440 7SUD4JD03 SCV Setup Panel. It's not working and we need a replacement. Please advise. Thank you!

—> Purchase or Repair:
#John Deere by Martin Connor on 2015-07-30 07:20
I need assistance with my John Deere RE65483 7SUD5JD04 for the SCV Setup Panel. This unit caused downtime and I should report it as a shift supervisor. I need a quick answer regarding what happened and when before the next shift starts.

—> Purchase or Repair:
#John Deere by G K SEYMOUR on 2015-07-18 08:20
Can the John Deere RE64583 7SUD3JD01 SCV Setup Panel be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by luis Gregorio Almendarez on 2013-08-05 06:32
The John Deere Bale Trak Plus RE159944 unit is not working.

—> Purchase or Repair:
#John Deere by AZLI SIJAM on 2005-03-27 00:00
John Deere RE522528 experiencing engine control issues, need repair ASAP.

—> Purchase or Repair:
#John Deere by christian lahoud on 2013-07-13 23:57
Do you have a replacement John Deere RE63440 7SUD4JD03 SCV setup Panel available? It's critical for keeping production running smoothly. Thank you.

—> Purchase or Repair:
#John Deere by Fernandez on 2011-02-19 08:42
The John Deere RE66821 7AT6JD01 Analog Tachometer unit is displaying erratic behavior. It is not functioning as it normally does and requires further inspection to determine the issue.

—> Purchase or Repair:
#John Deere by Cornia/Desert on 2016-06-02 03:22
Can the John Deere RE64583 7SUD5JD04 SCV Setup Panel be repaired or purchased? I'm looking to check this off my to-do list. Thank you.

—> Purchase or Repair:
#John Deere by Michael Groll on 2025-06-03 19:00
I can definitely help you with that. I'll reach out to inquire about the support and availability of parts for the John Deere RE218346 controller.

—> Purchase or Repair:
#John Deere by wiebe on 2015-02-07 01:52
Could you please confirm if the John Deere RE64583 7SUD5JD04 SCV Setup Panel is still supported, and if replacement parts are available for it? Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.