John Deere Service & Repair Forum
The John Deere RE172237 7VMU0JD01 Vehicle Monitor is failing to display critical data, causing delays and disruptions in our production line. Immediate repair service is urgently needed to prevent further downtime.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "John Deere"
- John Deere → John Deere RE66821 7AT6JD01 ↗
- John Deere → John Deere BALE TRAK PLUS RE159944 ↗
- John Deere → John Deere RE64583 7SUD5JD04 ↗
- John Deere → John Deere MOTOROLA RE64583 ↗
- John Deere → John Deere RE63440 7SUD4JD03 ↗
If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 327 Comments
I've noticed that the digital display on the John Deere Motorola RE64583 seems to have stopped working. The machine is experiencing some issues, and I'm not exactly sure what it does, but I wanted to bring it to your attention. Thank you for looking into this matter.
—> Purchase or Repair:
—> Purchase or Repair:
Please provide assistance with John Deere part number RE64583 7SUD5JD04 for the SCV Setup Panel. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, we have a John Deere RE64583 7SUD5JD04 with a description of SCV setup panel that needs repair. Could you please provide us with repair information as soon as possible? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Can you please assist in checking whether the John Deere AT320355 AT320694 CAN Monitor Unit is still supported or if replacement parts are available? It's an older unit, and we are unsure about its manufacturer. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
John Deere ECU 70842 displaying error code A-0530G12, unable to power on or communicate with equipment properly. Need repairs on the controller unit urgently.
—> Purchase or Repair:
—> Purchase or Repair:
I experienced downtime with the John Deere RE63440 7SUD4JD03 due to an issue with the SCV setup Panel. This occurred on . Need quick clarification before the next shift begins.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, we have a John Deere part AT320355 AT320694, the CAN Monitor Unit, that needs repair but we can't find a replacement. Please provide repair information or options as soon as possible. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE64583 7SUD5JD04 is a SCV Setup Panel that isn't working. The maintenance team needs to take a look at it.
—> Purchase or Repair:
—> Purchase or Repair:
Unit RE65483 7SUD5JD04 is down due to SCV Setup Panel issue. Please check and fix it during the day shift. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
John Deere RE66265 7MRT8JDO1E Digital Tachometer not displaying any readings.
—> Purchase or Repair:
—> Purchase or Repair:
John Deere RE64583 7SUD5JD04 - SCV Setup Panel not responding, halting production.
—> Purchase or Repair:
—> Purchase or Repair:
Looking for repair for John Deere RE66265 digital tachometer. The unit is not displaying any readings and seems completely dead. Need assistance from a professional technician.
—> Purchase or Repair:
—> Purchase or Repair:
Drive or board failure on John Deere RE66265 Digital Tachometer, need immediate maintenance. Heading to next machine, will troubleshoot further upon return.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, the John Deere RE64583 7SUD3JD01 is displaying error code 7SUD3JD01 on the SCV Setup panel. The equipment is currently down and not functioning. Please advise on next steps to resolve the issue
—> Purchase or Repair:
—> Purchase or Repair:
Assistance Required for John Deere A336395 Joystick ControllerHello ,Im reaching out on behalf of someone in the shop who needs help with the John Deere A336395 Joystick Controller. They mentioned that it's currently not working. Could you please provide guidance or assistance to resolve this issue?…Purchase or Repair: 
...
Show More
Show More
Hello, I'm reaching out on behalf of a client who is having an issue with a John Deere RE64583 part located in the SCV Setup panel of their equipment. They are encountering some problems and would like to get more information on troubleshooting and repairing this part. Would you be able to assist wi…Purchase or Repair: 
...
Show More
Show More
Hello, I need repair info for John Deere RE63440 7SUD4JD03 SCV Setup Panel. It's not working and we need a replacement. Please advise. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
I'm sorry to hear that your John Deere RE43902 7MRT2JD02 controller is no longer functioning properly. It seems like there might be an issue with its operation. I recommend reaching out to a technician for a closer look and assessment.
—> Purchase or Repair:
—> Purchase or Repair:
John Deere Bale Trak Plus RE159944 board/drive failure on Bale Monitor. Needs immediate attention to restore functionality.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm inquiring about an issue with part number RE46704 7AT2JD01. The tach display doesn't come on when cold. Can you please provide information on troubleshooting and potential solutions? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hey, the John Deere Bale Trak Plus RE159944 monitor unit went down mid-shift. Needs attention before next use. Please check and fix asap. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I need assistance with John Deere parts AT320355 and AT320694, which are CAN Monitor Units. Can you provide information on troubleshooting and repairs for these parts? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
: Our industrial oven has stopped working properly. It will turn on but won't heat up consistently and is fluctuating between high and low temperature ranges. This issue prevents us from completing our baking tasks efficiently, which significantly impacts production deadlines and quality control. Ba…Purchase or Repair: 
...
Show More
Show More
Experiencing SCV setup panel issues on John Deere RE63440 7SUD4JD03 suspect a drive or board failure. Need immediate inspection and replacement.
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, the John Deere RE66265 Digital Tachometer is displaying error code E4. Equipment is not registering engine RPMs accurately. Kindly advise on troubleshooting steps needed for proper diagnosis and repair. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE63440 7SUD4JD03 SCV setup panel is not functioning as expected. It seems to be acting unusual and not performing its usual functions.
—> Purchase or Repair:
—> Purchase or Repair:
Equipment Down John Deere RE64583 7SUD3JD01Issue SCV Setup Panel not functioningSymptom Not responding to inputsPlease advise on possible error codes or alarms.
—> Purchase or Repair:
—> Purchase or Repair:
I am following up on my previous message regarding the John Deere RE63440 7SUD4JD03 unit being down. Please provide assistance
—> Purchase or Repair:
—> Purchase or Repair:
Do you have a John Deere RE49192 7THM2JD03 tachometer available for sale or repair? Our unit stopped functioning, and we need to keep production running smoothly.
—> Purchase or Repair:
—> Purchase or Repair:
John Deere RE64583 7SUD5JD04 - SCV Setup Panel failure alert during rounds. Investigating drive or board issue now.
—> Purchase or Repair:
—> Purchase or Repair:
I want to check off fixing or replacing my John Deere Motorola RE64583, a Digital Display. Can it be repaired or purchased as a new item?
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm interested in the John Deere Motorola RE64583 digital display unit. I'm trying to purchase one quickly but not 100% sure if this is the right model. Can you please provide information on pricing and availability? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
John Deere RE63440 7SUD4JD03 SCV setup Panel down mid-shift. Please check it out in the morning.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere Motorola RE64583 is displaying error code E342, indicating a communication issue with the engine control module. The equipment is currently non-operational, and a technician is needed for immediate assistance.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere Bale Trak Plus RE159944 is failing to display accurate bale counts and is not registering bale sizes correctly. This issue is affecting the production line efficiency and needs immediate attention to prevent further delays.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE66821 7AT6JD01 Analog Tachometer unit is displaying erratic behavior. It is not functioning as it normally does and requires further inspection to determine the issue.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE46704 7AT2JD01 experienced downtime due to the tach display not turning on when cold. To address this issue
—> Purchase or Repair:
—> Purchase or Repair:
Our John Deere RE64583 7SUD5JD04 is still down. Please provide assistance and get back to me as soon as possible. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
John Deere Bale Trak Plus RE159944 is down. Need checking during the day shift.
—> Purchase or Repair:
—> Purchase or Repair:
the John Deere RE66265 7MRT8JDO1E digital tachometer unit went down mid-shift. Needs attention ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
the John Deere RE66821 7AT6JD01 Analog Tachometer unit went down mid-shift. Needs attention ASAP!
—> Purchase or Repair:
—> Purchase or Repair:
We experienced unexpected downtime on the John Deere RE64583 7SUD5JD04 due to issues with the motor control. The incident occurred during the night shift yesterday. Please provide urgent feedback before the next shift begins.
—> Purchase or Repair:
—> Purchase or Repair:
Unit RE46704 7AT2JD01 experienced downtime due to the Tach Display not coming on when cold. This issue occurred during the night shift and is currently affecting production. Please advise on a solution before the next shift starts.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE63440 7SUD4JD03 is the SCV setup Panel, but I am still learning about its function. I will pass along this information to the maintenance team for further assessment.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE64583 7SUD3JD01 SCV Setup Panel is displaying abnormal behavior in the warehouse.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE64583 7SUD5JD04 is displaying error code E342. The SCV setup panel is unresponsive, preventing operation of the equipment. Please advise on troubleshooting steps or necessary repairs. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: