John Deere for Service call 1-336-969-0110 at Industrial Electronics Repair

John Deere Service & Repair Forum

Can you please confirm if the John Deere 120974T AT167497 monitor is still supported, and if it is, are replacement parts available for it? Thank you.

—> Purchase or Repair:

— Posted by annamaria paliotti on 2016-11-07

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "John Deere"

John Deere → John Deere RE64583 7SUD5JD04 ↗
John Deere → John Deere BALE TRAK PLUS RE159944 ↗
John Deere → John Deere RE66821 7AT6JD01 ↗
John Deere → John Deere RE63440 7SUD4JD03 ↗
John Deere → John Deere MOTOROLA RE64583 ↗

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 331 Comments

#John Deere by VERAIN on 2015-07-27 22:20

The John Deere RE49192 7THM2JD03 tachometer is displaying inconsistent readings and is fluctuating erratically, making it difficult to accurately measure engine RPM. It may need to be inspected and possibly replaced to ensure proper functioning.

—> Purchase or Repair:

#John Deere by Doug Crosby on 2013-03-25 23:32

Having issues with my John Deere RE64583 7SUD5JD04 SCV setup panel. Need a repair expert to fix it

—> Purchase or Repair:

#John Deere by S.RAVINDRANATH on 2013-03-25 15:32

I am following up on my previous message regarding the John Deere RE63440 7SUD4JD03 unit being down. Please provide assistance

—> Purchase or Repair:

#John Deere by claudia on 2014-12-16 15:44

Please advise if the John Deere RE43902 7MRT2JD02 controller is still supported or if replacement parts are available for this unit. Thank you.

—> Purchase or Repair:

#John Deere by Basson on 2013-03-20 09:49

The Bale Trak Plus RE159944 is displaying error code E01.

—> Purchase or Repair:

#John Deere by stephen spaner on 2015-07-25 02:20

The John Deere RE65483 7SUD5JD04 is not functioning properly, acting in an unusual way. Please provide more details so we can better assist you.

—> Purchase or Repair:

#John Deere by Darek on 2015-07-09 17:32

Please provide details on the repair service for John Deere parts AT320355 and AT320694, described as CAN Monitor Units. Thank you.

—> Purchase or Repair:

#John Deere by sergio garcia on 2019-08-23 21:44

: Our industrial oven has stopped working properly. It will turn on but won't heat up consistently and is fluctuating between high and low temperature ranges. This issue prevents us from completing our baking tasks efficiently, which significantly impacts production deadlines and quality control. Ba…Purchase or Repair:

#John Deere by roger moutal on 2015-02-02 18:39

I'm interested in buying the John Deere RE65483 7SUD5JD04 SCV Setup Panel. Could you please provide information on pricing and availability? We're looking to source one quickly. Thank you.

—> Purchase or Repair:

#John Deere by ketan. raval on 2013-04-20 22:05

John Deere Bale Trak Plus RE159944 not lighting up or displaying any information on the monitor.

—> Purchase or Repair:

#John Deere by Mulinge on 2014-02-15 11:58

Hello, the John Deere RE64583 7SUD3JD01 is displaying error code 7SUD3JD01 on the SCV Setup panel. The equipment is currently down and not functioning. Please advise on next steps to resolve the issue

—> Purchase or Repair:

#John Deere by Su on 2013-12-12 20:58

John Deere RE63440 7SUD4JD03 SCV setup Panel unit went down mid-shift. Needs attention ASAP.

—> Purchase or Repair:

#John Deere by Eleanor on 2015-01-08 11:41

the John Deere RE66265 7MRT8JDO1E digital tachometer unit went down mid-shift. Needs attention ASAP.

—> Purchase or Repair:

#John Deere by Johns on 2013-08-13 15:32

Hi there, we're needing repair info for a John Deere Bale Trak Plus RE159944 Bale Monitor. Can you help us out quickly? Thanks!

—> Purchase or Repair:

#John Deere by Teri High on 2013-02-18 07:49

Hi, we are currently experiencing an issue with the John Deere RE64583 7SUD5JD04 displaying error code SCV Setup panel. Equipment is down, needing immediate attention. Thank you.

—> Purchase or Repair:

#John Deere by AZLI SIJAM on 2005-03-27 00:00

John Deere RE522528 experiencing engine control issues, need repair ASAP.

—> Purchase or Repair:

#John Deere by Jakubowski on 2010-09-15 08:35

The John Deere Motorola RE64583 is displaying error code E342, indicating a communication issue with the engine control module. The equipment is currently non-operational, and a technician is needed for immediate assistance.

—> Purchase or Repair:

#John Deere by djabeur on 2015-07-28 19:20

Looking for repair assistance with a John Deere RE64583 SCV Setup Panel unit that isn't functioning properly. Need a qualified technician to diagnose and fix the issue

—> Purchase or Repair:

#John Deere by GONDAL on 2013-03-03 03:30

Hello, I'm reaching out on behalf of a client who is having an issue with a John Deere RE64583 part located in the SCV Setup panel of their equipment. They are encountering some problems and would like to get more information on troubleshooting and repairing this part. Would you be able to assist wi…Purchase or Repair:

#John Deere by Roiger on 2015-01-09 04:41

Can the John Deere RE65483 7SUD5JD04 SCV Setup Panel be repaired or replaced? Just trying to check this off my to-do list.

—> Purchase or Repair:

#John Deere by Addams on 2015-07-14 08:20

Please provide an update on the John Deere RE64583 7SUD3JD01 SCV Setup Panel issue. The unit is still not working, and we need a response as soon as possible.

—> Purchase or Repair:

#John Deere by fida hussain on 2011-09-20 03:26

John Deere RE66821 7AT6JD01 is down, not functioning correctly. Analog Tachometer not working, no response to any input. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:

#John Deere by Pat Rumsey on 2014-12-22 03:44

The John Deere RE64583 7SUD3JD01 SCV Setup panel is not working.

—> Purchase or Repair:

#John Deere by deepakshinde on 2013-04-30 15:33

I experienced downtime with the John Deere RE63440 7SUD4JD03 due to an issue with the SCV setup Panel. This occurred on . Need quick clarification before the next shift begins.

—> Purchase or Repair:

#John Deere by Engiz on 2015-07-20 08:20

The John Deere RE46704 7AT2JD01 is still down. Please address the issue and provide an update

—> Purchase or Repair:

#John Deere by Mon Torres on 2015-02-17 20:24

I need assistance with my John Deere AT320355 AT320694, which is a CAN Monitor Unit. It's an older unit, and we're unsure of the manufacturer. Can you please confirm if it's still supported or if replacement parts are available?

—> Purchase or Repair:

#John Deere by Kelly B Adams on 2015-07-27 09:20

The John Deere RE65483 7SUD5JD04 unit is related to the SCV Setup Panel and is currently not functioning as expected. That's the information I have at the moment.

—> Purchase or Repair:

#John Deere by Alexandre Moreira on 2014-12-28 20:06

The John Deere RE64583 7SUD5JD04 unit went down mid-shift due to a MOTOR CONTROL issue. Please have someone address it during the day shift. Thanks!

—> Purchase or Repair:

#John Deere by Clay Wingo/ Farrow Fabricating on 2013-07-19 06:55

The John Deere RE63440 7SUD4JD03 is not working. The issue seems to be related to the SCV setup panel. That's all the information I have at the moment.

—> Purchase or Repair:

#John Deere by annmarie on 2014-11-01 01:57

Are you able to repair the John Deere RE64583 7SUD5JD04 motor control unit, or do you have a replacement available for sale? It's urgent to keep production running.

—> Purchase or Repair:

#John Deere by Fred Coster on 2013-04-28 13:18

The John Deere RE64583 7SUD5JD04 is not functioning properly. Please check the SCV Setup panel.

—> Purchase or Repair:

#John Deere by wargin on 2015-08-13 10:20

Equipment down with John Deere RE66265 Digital Tachometer displaying error code E003. Need immediate assistance to troubleshoot and resolve issue.

—> Purchase or Repair:

#John Deere by Ansarudi on 2014-12-15 19:44

Please provide an update on our John Deere RE64583 7SUD3JD01 with the SCV Setup panel. The unit is still down. We need assistance urgently.

—> Purchase or Repair:

#John Deere by Chris Norwood on 2013-08-07 09:32

Hello, I hope this message finds you well. I am interested in purchasing the John Deere RE64583 7SUD5JD04 SCV Setup panel. Could you please provide information on pricing and availability? I am looking to source one quickly and would appreciate any assistance you can offer. Thank you. —> …Purchase or Repair:

#John Deere by BRIAN STIGLIC on 2013-04-06 01:57

Do you have a John Deere RE63440 7SUD4JD03 SCV setup Panel available for sale or repair? Production is currently down and we need to get it up and running as soon as possible. Thank you.

—> Purchase or Repair:

#John Deere by JR TECHNO PRODUCTS on 2015-08-07 20:20

Tach display on RE46704 not working when cold, likely due to a failed drive or board. Need to address this issue with troubleshooting.

—> Purchase or Repair:

#John Deere by ahmed gomaa on 2015-07-08 23:32

Hi, the John Deere RE64583 7SUD3JD01 is showing error code SCV Setup Panel. Equipment is currently down and in need of urgent repair. Thank you.

—> Purchase or Repair:

#John Deere by steven schmit on 2013-05-02 02:50

The John Deere Bale Trak Plus RE159944 is displaying error code E001. The bale monitor is not detecting any bales although they are passing through. Need urgent assistance to troubleshoot and resolve this issue. Thank you.

—> Purchase or Repair:

#John Deere by Senthil on 2015-08-09 23:20

The John Deere RE64583 7SUD5JD04 SCV Setup Panel is not functioning as expected. The unit is displaying unusual behavior, which is different from its normal operation.

—> Purchase or Repair:

#John Deere by larry palmer on 2025-06-08 07:22

Do you have a John Deere RE218346 controller available for sale or for repair? Need it urgently to keep production running.

—> Purchase or Repair:

#John Deere by CHIRPpdm on 2011-03-07 06:51

Dear Supervisor,I need urgent support regarding the John Deere RE66821 7AT6JD01 Analog Tachometer. It malfunctioned this morning at 730 am, causing downtime on the production line. Can you please provide immediate assistance or instructions on how to address this issue before the next shift begins?T…Purchase or Repair:

#John Deere by Ronnebaum on 2015-01-07 11:41

The John Deere AT320355 AT320694 is a CAN Monitor Unit that is currently not working.

—> Purchase or Repair:

#John Deere by Hjeresen on 2015-07-23 06:43

The John Deere RE64583 7SUD5JD04 SCV Setup Panel unit isn't working.

—> Purchase or Repair:

#John Deere by Gastón Godoy L. on 2013-08-22 14:32

The John Deere Bale Trak Plus RE159944 unit in the warehouse is displaying unusual behavior.

—> Purchase or Repair:

#John Deere by Osvaldo on 2013-08-11 03:35

Can the John Deere RE64583 7SUD5JD04 SCV Setup panel be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:

#John Deere by Dorothy on 2015-08-14 01:20

Unit RE65483 7SUD5JD04 is down due to SCV Setup Panel issue. Please check and fix it during the day shift. Thank you!

—> Purchase or Repair:

#John Deere by TREJO on 2010-01-31 21:46

Do you have a John Deere Motorola RE64583 Digital Display available for sale or repair? The unit went down and production needs to keep running.

—> Purchase or Repair:

#John Deere by ian pierce on 2005-02-02 00:00

Hello, I am reaching out on behalf of my client regarding an issue with part number RE64583 7SUD3JD01 on their John Deere equipment. The problem seems to involve the SCV Setup panel. Can you please provide more information or guidance on how to address this issue? Thank you.

—> Purchase or Repair:

#John Deere by IVAN PUCH MEX on 2013-08-13 04:35

My John Deere Bale Trak Plus RE159944 isn't displaying any data or responding. Looking for a technician who can troubleshoot and repair it

—> Purchase or Repair:

#John Deere by Kohlbrenner Chris on 2013-08-11 11:35

I noticed the John Deere RE64583 7SUD5JD04 SCV Setup panel is displaying unusual behavior. It's not functioning as expected and seems to be acting erratically.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.