John Deere Service & Repair Forum

I have a John Deere RE219402 controller that is not functioning properly. The unit fails to power on and does not respond to any input commands. I have attempted to troubleshoot the issue by checking all connections and ensuring proper power supply, but the problem persists. Based on my assessment, the controller likely needs to be replaced. The estimated cost for a replacement John Deere RE219402 controller is approximately $300 to $500 based on current market rates. I am seeking repair service to address this issue

—> Purchase or Repair: Ticket Image

— Posted by Jacob Bergen on 2024-08-23

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by ketan. raval on 2013-04-20 22:05
John Deere Bale Trak Plus RE159944 not lighting up or displaying any information on the monitor.

—> Purchase or Repair:
#John Deere by Bruno Arca on 2013-08-13 20:35
Do you have a John Deere Bale Trak Plus RE159944 available for sale or repair? Our unit has gone down, and we need to get production up and running quickly.

—> Purchase or Repair:
#John Deere by Alexandre Moreira on 2014-12-28 20:06
The John Deere RE64583 7SUD5JD04 unit went down mid-shift due to a MOTOR CONTROL issue. Please have someone address it during the day shift. Thanks!

—> Purchase or Repair:
#John Deere by JR TECHNO PRODUCTS on 2015-08-07 20:20
Tach display on RE46704 not working when cold, likely due to a failed drive or board. Need to address this issue with troubleshooting.

—> Purchase or Repair:
#John Deere by Steve Block on 2015-07-16 10:20
Hello, I am inquiring about the John Deere RE66265 7MRT8JDO1E Digital Tachometer. Our team is looking for information on whether this unit is still supported and if replacement parts are available. Could you please provide us with information regarding the current status of this model? Thank you. —>…Purchase or Repair: Ticket Image...
Show More
#John Deere by Jimmi on 2013-08-12 23:32
The SCV Setup panel on John Deere RE64583 7SUD5JD04 is malfunctioning, affecting the line. Urgently need repair service to address the issue and get production back on track.

—> Purchase or Repair:
#John Deere by Bateman on 2014-01-18 03:45
The John Deere RE43902 controller is not working. Please check and repair as needed.

—> Purchase or Repair:
#John Deere by Sehm on 2015-07-15 04:20
Hi there, the John Deere RE66265 Digital Tachometer is displaying error code E4. Equipment is not registering engine RPMs accurately. Kindly advise on troubleshooting steps needed for proper diagnosis and repair. Thank you.

—> Purchase or Repair:
#John Deere by bayo on 2015-08-14 07:20
John Deere RE66265 7MRT8JDO1E Digital Tachometer not displaying any readings.

—> Purchase or Repair:
#John Deere by Garay on 2013-03-11 01:53
Hi team, the John Deere Bale Trak Plus RE159944 is down; need someone to check it out during the day. Thanks!

—> Purchase or Repair:
#John Deere by ARUMOY CHATTERJEE on 2011-04-07 15:48
John Deere RE66821 7AT6JD01 Analog Tachometer issue Drive or board failure. Requires immediate troubleshooting and replacement.

—> Purchase or Repair:
#John Deere by VERAIN on 2015-07-27 22:20
The John Deere RE49192 7THM2JD03 tachometer is displaying inconsistent readings and is fluctuating erratically, making it difficult to accurately measure engine RPM. It may need to be inspected and possibly replaced to ensure proper functioning.

—> Purchase or Repair:
#John Deere by steven schmit on 2013-05-02 02:50
The John Deere Bale Trak Plus RE159944 is displaying error code E001. The bale monitor is not detecting any bales although they are passing through. Need urgent assistance to troubleshoot and resolve this issue. Thank you.

—> Purchase or Repair:
#John Deere by Shaliah AM on 2015-07-12 03:32
The issue with the John Deere RE46704 7AT2JD01 is that the Tach Display fails to come on when cold. This is affecting the production line as it hinders visibility and monitoring. Immediate attention is required to resolve this issue

—> Purchase or Repair:
#John Deere by LEPOINT on 2013-03-16 14:15
I have a John Deere Bale Trak Plus RE159944 that is not displaying any information on the monitor. Looking for a repair specialist who can troubleshoot and fix the issue

—> Purchase or Repair:
#John Deere by Aguiniga on 2016-02-29 12:47
John Deere RE64583 7SUD5JD04 - SCV Setup Panel failure alert during rounds. Investigating drive or board issue now.

—> Purchase or Repair:
#John Deere by Mike Ferrell on 2015-07-26 00:20
I need assistance with John Deere part number RE49192 7THM2JD03, which is a Tachometer. My client is having issues with this part. Can you provide me with more information or an estimate for repair/replacement? Thank you.

—> Purchase or Repair:
#John Deere by Richard Byrd on 2013-04-30 03:05
I'm experiencing an issue with the SCV setup panel on my John Deere RE64583 7SUD5JD04. Something seems to have stopped working, and I'm not sure what the exact problem is. Any guidance or assistance would be greatly appreciated.

—> Purchase or Repair:
#John Deere by KHAN on 2013-07-29 09:32
Do you have a replacement John Deere RE64583 7SUD5JD04 SCV setup panel available for sale or repair? It's urgent to keep production running.

—> Purchase or Repair:
#John Deere by John Richards on 2014-02-12 02:58
The unit RE64583 7SUD3JD01 is not working properly. It is related to the SCV Setup panel.

—> Purchase or Repair:
#John Deere by Tran Minh on 2013-02-25 12:48
Hello, I've noticed that the John Deere Bale Trak Plus RE159944 is displaying abnormal behavior. Instead of functioning as usual, it seems to be acting strangely. Thank you for looking into this issue for me.

—> Purchase or Repair:
#John Deere by HELLENIC on 2013-05-13 23:20
Can you please provide information on whether the John Deere RE64583 7SUD5JD04 SCV setup panel is still supported and if replacement parts are available at this time? Thank you.

—> Purchase or Repair:
#John Deere by Wayne Alderman on 2015-07-31 15:20
Do you have a John Deere RE49192 7THM2JD03 Tachometer available for sale or repair? Our unit is down, and we need to keep production running.

—> Purchase or Repair:
#John Deere by Jakubowski on 2010-09-15 08:35
The John Deere Motorola RE64583 is displaying error code E342, indicating a communication issue with the engine control module. The equipment is currently non-operational, and a technician is needed for immediate assistance.

—> Purchase or Repair:
#John Deere by BRIAN STIGLIC on 2013-04-06 01:57
Do you have a John Deere RE63440 7SUD4JD03 SCV setup Panel available for sale or repair? Production is currently down and we need to get it up and running as soon as possible. Thank you.

—> Purchase or Repair:
#John Deere by Fracassi Roberto on 2013-08-03 20:32
Equipment down due to error code SCV Setup panel on John Deere RE64583 7SUD5JD04. Need urgent assistance to troubleshoot and rectify.

—> Purchase or Repair:
#John Deere by Mike Martinelli on 2014-12-25 11:06
John Deere RE43902 7MRT2JD02 is down. Issue with the controller. Check and fix during the day.

—> Purchase or Repair:
#John Deere by Mon Torres on 2015-02-17 20:24
I need assistance with my John Deere AT320355 AT320694, which is a CAN Monitor Unit. It's an older unit, and we're unsure of the manufacturer. Can you please confirm if it's still supported or if replacement parts are available?

—> Purchase or Repair:
#John Deere by brian egan on 2014-01-07 11:22
The John Deere RE64583 7SUD5JD04 is displaying ERROR CODE 305 - MOTOR CONTROL FAILURE. Equipment is currently down, urgent assistance needed.

—> Purchase or Repair:
#John Deere by Kelly B Adams on 2015-07-27 09:20
The John Deere RE65483 7SUD5JD04 unit is related to the SCV Setup Panel and is currently not functioning as expected. That's the information I have at the moment.

—> Purchase or Repair:
#John Deere by john lowrey on 2015-07-12 13:32
We experienced downtime with the John Deere RE65483 7SUD5JD04 due to issues with the SCV Setup Panel. The incident occurred during our shift yesterday from 10 AM to 2 PM. Please provide feedback or instructions before the next shift begins. Thank you.

—> Purchase or Repair:
#John Deere by Chidester on 2015-08-08 01:20
The John Deere RE49192 7THM2JD03 Tachometer is not functioning as expected.

—> Purchase or Repair:
#John Deere by Patrick Van Ouse on 2013-12-13 12:52
Experiencing issues with my John Deere RE64583 7SUD5JD04 with the SCV Setup panel. Need a technician to diagnose and repair ASAP.

—> Purchase or Repair:
#John Deere by Jerry Fields on 2013-08-19 06:32
SCV Setup panel on John Deere RE64583 7SUD5JD04 is malfunctioning, halting the production line. Urgent repair service required to restore operation immediately.

—> Purchase or Repair:
#John Deere by darren kotzur on 2011-06-07 19:38
Can the John Deere RE66821 7AT6JD01 Analog Tachometer be repaired or purchased to resolve the issue? Checking this off my to-do list.

—> Purchase or Repair:
#John Deere by Kohlbrenner Chris on 2013-08-11 11:35
I noticed the John Deere RE64583 7SUD5JD04 SCV Setup panel is displaying unusual behavior. It's not functioning as expected and seems to be acting erratically.

—> Purchase or Repair:
#John Deere by Suliman on 2015-03-09 12:13
Looking for repair for John Deere RE66265 digital tachometer. The unit is not displaying any readings and seems completely dead. Need assistance from a professional technician.

—> Purchase or Repair:
#John Deere by Enzo lezzi on 2020-02-08 00:00
Urgent Repair Needed for John Deere RE81075 ControllerHi, we are experiencing issues with our John Deere RE81075 - the controller is not responding and displaying error code E123. Equipment is currently down, affecting operations. Please advise on urgent repair action required. Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Swanepoel on 2011-04-11 19:20
The John Deere RE66821 7AT6JD01 analog tachometer unit is not working.

—> Purchase or Repair:
#John Deere by s b sharma on 2015-07-31 05:20
I believe there's an issue with the digital tachometer on the John Deere RE66265 7MRT8JDO1E. It seems like the digital display has stopped working properly. Would you like me to investigate further or seek help from a technician?

—> Purchase or Repair:
#John Deere by Engiz on 2015-07-20 08:20
The John Deere RE46704 7AT2JD01 is still down. Please address the issue and provide an update

—> Purchase or Repair:
#John Deere by FERNANDO ALVAREZ on 2016-12-10 13:00
The John Deere RE172237 7VMU0JD01 Vehicle Monitor isn't working properly.

—> Purchase or Repair:
#John Deere by marlon on 2015-07-20 02:20
Experiencing issues with my John Deere RE64583 7SUD5JD04 SCV Setup Panel. Need a skilled technician to repair it

—> Purchase or Repair:
#John Deere by Dimitar on 2013-02-05 12:30
Please provide more details about the John Deere RE63440 7SUD4JD03 SCV setup Panel so that we can check if it's still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:
#John Deere by Nakata on 2013-10-30 18:58
I need an update on the John Deere RE64583 7SUD5JD04 SCV setup panel. The unit is still down. Please provide assistance immediately.

—> Purchase or Repair:
#John Deere by Nikita on 2013-07-23 20:32
SCV setup Panel on John Deere RE63440 7SUD4JD03 is not responding.

—> Purchase or Repair:
#John Deere by rumanto on 2014-07-18 14:24
Hello, could you please provide repair info for a John Deere RE64583 7SUD3JD01 SCV Setup panel? It needs to be replaced, but we can't find one. Thank you!

—> Purchase or Repair:
#John Deere by VIJAY PATEL on 2015-07-23 11:43
The John Deere RE66265 7MRT8JDO1E Digital Tachometer is displaying abnormal behavior - it is not functioning as expected.

—> Purchase or Repair:
#John Deere by Michael Read on 2011-02-13 01:59
The John Deere RE66821 7AT6JD01 analog tachometer unit is not working. Please check and repair during the day shift.

—> Purchase or Repair:
#John Deere by Stith on 2014-12-25 19:06
Experiencing issues with my John Deere RE43902 7MRT2JD02 controller unit. Need repairs or troubleshooting assistance.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.