John Deere Service & Repair Forum

John Deere Motorola RE64583 unit down - digital display issue. Needs attention ASAP. Night shift maintenance crew.

—> Purchase or Repair: Ticket Image

— Posted by Yoram Friedman on 2010-11-18

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by Stith on 2014-12-25 19:06
Experiencing issues with my John Deere RE43902 7MRT2JD02 controller unit. Need repairs or troubleshooting assistance.

—> Purchase or Repair:
#John Deere by Jacob Bergen on 2024-08-23 10:45
I have a John Deere RE219402 controller that is not functioning properly. The unit fails to power on and does not respond to any input commands. I have attempted to troubleshoot the issue by checking all connections and ensuring proper power supply, but the problem persists. Based on my assessment, …Purchase or Repair: Ticket Image...
Show More
#John Deere by Leonardo Jose Fueyo on 2015-07-30 01:20
Can you please assist in checking whether the John Deere AT320355 AT320694 CAN Monitor Unit is still supported or if replacement parts are available? It's an older unit, and we are unsure about its manufacturer. Thank you.

—> Purchase or Repair:
#John Deere by Len Minor on 2013-04-10 20:34
John Deere Bale Trak Plus RE159944 board/drive failure on Bale Monitor. Needs immediate attention to restore functionality.

—> Purchase or Repair:
#John Deere by Leo McCarthy on 2015-08-11 04:20
Drive or board failure in John Deere AT320355 AT320694 CAN Monitor Unit. Action needed ASAP.

—> Purchase or Repair:
#John Deere by Rita McCrory on 2015-07-11 15:20
Can the John Deere RE46704 7AT2JD01 Tach Display be repaired or replaced? Trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Nikita on 2013-07-23 20:32
SCV setup Panel on John Deere RE63440 7SUD4JD03 is not responding.

—> Purchase or Repair:
#John Deere by Marcy Berry on 2015-02-06 01:31
Can the John Deere AT320355 AT320694 CAN Monitor Unit be repaired or purchased as a replacement? I'm trying to address this

—> Purchase or Repair:
#John Deere by tuan truong on 2015-01-12 12:41
The CAN Monitor Unit on the John Deere AT320355 AT320694 is malfunctioning, causing a disruption in the production line. Immediate attention is needed to resolve this issue efficiently and resume operations swiftly.

—> Purchase or Repair:
#John Deere by VIJAY PATEL on 2015-07-23 11:43
The John Deere RE66265 7MRT8JDO1E Digital Tachometer is displaying abnormal behavior - it is not functioning as expected.

—> Purchase or Repair:
#John Deere by Leslie on 2013-11-30 12:36
Hello, following up on my previous message regarding the John Deere RE64583 unit. It's still down. I urgently need assistance to resolve the issue. Please respond

—> Purchase or Repair:
#John Deere by Gauthier on 2015-07-11 20:32
The John Deere RE65483 7SUD5JD04 unit, described as the SCV Setup Panel, is not working according to the maintenance team.

—> Purchase or Repair:
#John Deere by Secor on 2013-08-12 03:32
I'm sorry to hear about the issue with your John Deere RE64583 7SUD5JD04. It seems like there might be a problem with the SCV setup panel. I recommend contacting a technician for a detailed inspection and repair.

—> Purchase or Repair:
#John Deere by Joshua McCoy on 2014-02-14 09:58
Hi, do you have a John Deere RE64583 7SUD5JD04 motor control unit available for sale or repair? Our production is down, and we need to get it fixed quickly to keep operations running smoothly. Thank you.

—> Purchase or Repair:
#John Deere by Ivan Alarcon on 2014-12-25 05:06
It seems like there may be an issue with the motor control on your John Deere RE64583. Something seems to have stopped working properly, but I'll do my best to help you figure out what's going on. Let's work together to troubleshoot and get your machine back in good working order. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Bud Gibson on 2013-09-09 00:00
Experiencing malfunction with John Deere AH2244250 electronic control unit. Device not responding to commands or displaying error codes. Urgent repair needed.

—> Purchase or Repair:
#John Deere by Strohmenger on 2015-08-04 13:19
The digital tachometer on the John Deere RE66265 7MRT8JDO1E is malfunctioning, affecting the production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#John Deere by IVAN PUCH MEX on 2013-08-13 04:35
My John Deere Bale Trak Plus RE159944 isn't displaying any data or responding. Looking for a technician who can troubleshoot and repair it

—> Purchase or Repair:
#John Deere by Mon Torres on 2015-02-17 20:24
I need assistance with my John Deere AT320355 AT320694, which is a CAN Monitor Unit. It's an older unit, and we're unsure of the manufacturer. Can you please confirm if it's still supported or if replacement parts are available?

—> Purchase or Repair:
#John Deere by Ginsburg on 2013-02-19 06:27
I will send a message regarding the non-functioning John Deere RE64583 7SUD5JD04 unit.

—> Purchase or Repair:
#John Deere by Baleras on 2015-07-07 15:32
Can the SCV Setup Panel for the John Deere RE65483 7SUD5JD04 be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Pennington on 2015-07-09 18:21
Can the John Deere RE49192 Tachometer be repaired or purchased? I'm looking to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Ferguson on 2013-02-10 16:39
The John Deere RE63440 7SUD4JD03 is the SCV setup Panel, but I am still learning about its function. I will pass along this information to the maintenance team for further assessment.

—> Purchase or Repair:
#John Deere by calvin haines on 2010-08-15 13:28
The unit with the digital display (John Deere Motorola RE64583) in the warehouse is exhibiting abnormal behavior. The display is flickering intermittently, and some of the buttons are not responding properly. It seems to be freezing up occasionally as well.

—> Purchase or Repair:
#John Deere by john lowrey on 2015-07-12 13:32
We experienced downtime with the John Deere RE65483 7SUD5JD04 due to issues with the SCV Setup Panel. The incident occurred during our shift yesterday from 10 AM to 2 PM. Please provide feedback or instructions before the next shift begins. Thank you.

—> Purchase or Repair:
#John Deere by RJ GARCIA on 2014-02-15 23:58
Hi there, we have a John Deere RE43902 7MRT2JD02 controller that stopped working and we need a replacement. Could you please provide us with the repair information for this part? We need a quick solution. Thank you!

—> Purchase or Repair:
#John Deere by benmerkhi on 2013-08-01 10:32
John Deere RE64583 7SUD5JD04 SCV Setup panel not responding.

—> Purchase or Repair:
#John Deere by Randy Opperman on 2013-08-15 14:01
Hi there, we are in need of repair info for a John Deere RE64583 7SUD5JD04 SCV Setup panel. Can you please provide us with assistance on this as soon as possible? Thank you!

—> Purchase or Repair:
#John Deere by Lou Pennacchia on 2018-08-19 00:00
Repair Inquiry for John Deere Greenstar ControllerDear Repair Shop,I am reaching out on behalf of my client who is experiencing an issue with their John Deere Greenstar Controller. The part number is not specified, but they are encountering functionality problems with the controller.Could you please…Purchase or Repair: Ticket Image...
Show More
#John Deere by Suliman on 2015-03-09 12:13
Looking for repair for John Deere RE66265 digital tachometer. The unit is not displaying any readings and seems completely dead. Need assistance from a professional technician.

—> Purchase or Repair:
#John Deere by vbaskar on 2011-06-13 13:22
John Deere RE66821 7AT6JD01 Analog Tachometer drive or board just failed. Needs replacement ASAP.

—> Purchase or Repair:
#John Deere by Bruno Arca on 2013-08-13 20:35
Do you have a John Deere Bale Trak Plus RE159944 available for sale or repair? Our unit has gone down, and we need to get production up and running quickly.

—> Purchase or Repair:
#John Deere by Cesar Mendez on 2016-06-01 17:22
The John Deere RE66221 7EHH6JD01 electronic hitch is showing error code E306. Equipment not lifting as programmed. Need immediate assistance troubleshooting and resolving the issue to minimize downtime.

—> Purchase or Repair:
#John Deere by Carmelo Cocuzza on 2013-08-16 04:01
Hello, I am interested in purchasing the John Deere RE64583 7SUD5JD04 SCV Setup panel. Could you please provide information regarding pricing and availability? I am trying to source one quickly. Thank you.

—> Purchase or Repair:
#John Deere by Torsten on 2013-08-17 12:01
The John Deere Bale Trak Plus RE159944 is down. Need to check and fix it before day shift.

—> Purchase or Repair:
#John Deere by adesh on 2013-06-12 23:59
The SCV Setup panel on the John Deere RE64583 7SUD5JD04 is malfunctioning, impacting the production line. Urgent repair service is needed to resolve this issue

—> Purchase or Repair:
#John Deere by Hohmann on 2013-07-27 21:32
I need assistance with the John Deere RE64583 7SUD5JD04 SCV Setup panel unit. It's not functioning properly.

—> Purchase or Repair:
#John Deere by Basson on 2013-03-20 09:49
The Bale Trak Plus RE159944 is displaying error code E01.

—> Purchase or Repair:
#John Deere by Jimmi on 2013-08-12 23:32
The SCV Setup panel on John Deere RE64583 7SUD5JD04 is malfunctioning, affecting the line. Urgently need repair service to address the issue and get production back on track.

—> Purchase or Repair:
#John Deere by Nathan Yehirai on 2015-02-23 10:47
The SCV Setup Panel on my John Deere RE64583 7SUD3JD01 is displaying an error message and is not responding to input commands.

—> Purchase or Repair:
#John Deere by Jarrett on 2013-02-05 13:30
The John Deere Bale Trak Plus RE159944 is displaying error code E001. The monitor is unresponsive and not displaying any bale tracking information. Need urgent assistance to troubleshoot and resolve the issue.

—> Purchase or Repair:
#John Deere by Senthil on 2015-08-09 23:20
The John Deere RE64583 7SUD5JD04 SCV Setup Panel is not functioning as expected. The unit is displaying unusual behavior, which is different from its normal operation.

—> Purchase or Repair:
#John Deere by Shaliah AM on 2015-07-12 03:32
The issue with the John Deere RE46704 7AT2JD01 is that the Tach Display fails to come on when cold. This is affecting the production line as it hinders visibility and monitoring. Immediate attention is required to resolve this issue

—> Purchase or Repair:
#John Deere by AVELLANEDA on 2015-07-05 21:58
The John Deere RE49192 Tachometer is not working.

—> Purchase or Repair:
#John Deere by David Wilhelm on 2026-02-05 06:57
Request Service for John DeereModel/Part : Re208064 DisplayCrossed the battery leads which burned the fusable link. After that event the gauges work, but are not accurate or repeatable.

—> Purchase or Repair:
#John Deere by TT on 2014-04-03 16:29
The John Deere RE43902 7MRT2JD02 Controller is malfunctioning, causing a halt in production. Urgent repair is needed to get the line running smoothly again.

—> Purchase or Repair:
#John Deere by XU on 2011-05-03 23:33
The John Deere RE66821 7AT6JD01 is an Analog Tachometer unit, but I'm new on the job and not fully familiar with its functions. Maintenance team reported it's not working.

—> Purchase or Repair:
#John Deere by christian lahoud on 2013-07-13 23:57
Do you have a replacement John Deere RE63440 7SUD4JD03 SCV setup Panel available? It's critical for keeping production running smoothly. Thank you.

—> Purchase or Repair:
#John Deere by perea on 2015-02-22 19:47
Do you have a John Deere RE64583 7SUD3JD01 SCV Setup Panel available for purchase or repair? Need it urgently to keep production running smoothly.

—> Purchase or Repair:
#John Deere by Carini on 2015-07-19 01:20
We experienced downtime with the John Deere RE65483 7SUD5JD04 due to issues with the SCV Setup Panel. The incident occurred earlier today during the morning shift. Please provide details on what happened. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.