John Deere Service & Repair Forum

Can the John Deere RE66821 7AT6JD01 Analog Tachometer be repaired or replaced? I'm looking to check this off my to-do list.

—> Purchase or Repair: Ticket Image

— Posted by Mat Eicher on 2011-06-23

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by Leo McCarthy on 2015-08-11 04:20
Drive or board failure in John Deere AT320355 AT320694 CAN Monitor Unit. Action needed ASAP.

—> Purchase or Repair:
#John Deere by linville on 2015-08-01 00:20
Hello, I'm reaching out regarding the John Deere RE65483 7SUD5JD04 SCV Setup Panel. Could you please confirm if this can be repaired or needs to be replaced? I'm trying to address this

—> Purchase or Repair:
#John Deere by David Wilhelm on 2026-02-05 06:57
Request Service for John DeereModel/Part : Re208064 DisplayCrossed the battery leads which burned the fusable link. After that event the gauges work, but are not accurate or repeatable.

—> Purchase or Repair:
#John Deere by djabeur on 2015-07-28 19:20
Looking for repair assistance with a John Deere RE64583 SCV Setup Panel unit that isn't functioning properly. Need a qualified technician to diagnose and fix the issue

—> Purchase or Repair:
#John Deere by ngom on 2015-07-12 23:32
Hello, I am interested in purchasing the John Deere RE66265 7MRT8JDO1E Digital Tachometer. Could you please provide information regarding the pricing and availability? Also, I would appreciate it if you could confirm if this is the correct model. I am looking to source one quickly. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by balli aulakh on 2015-08-05 18:20
The unit with part numbers AT320355 and AT320694, which is the CAN Monitor Unit, is behaving abnormally. It is not functioning as it normally does and appears to be acting strangely.

—> Purchase or Repair:
#John Deere by Teri High on 2013-02-18 07:49
Hi, we are currently experiencing an issue with the John Deere RE64583 7SUD5JD04 displaying error code SCV Setup panel. Equipment is down, needing immediate attention. Thank you.

—> Purchase or Repair:
#John Deere by Don Crawford on 2015-08-14 23:20
Hello, I need repair info for the John Deere RE66265 7MRT8JDO1E Digital Tachometer. It stopped working and we need a replacement. Please send details ASAP. Thank you!

—> Purchase or Repair:
#John Deere by DAVID LEHMANN /ZIONS on 2013-12-27 17:43
Please provide an update on the John Deere RE64583 7SUD5JD04 SCV setup panel issue. The unit is still down. We need immediate attention on this matter.

—> Purchase or Repair:
The John Deere RE63440 7SUD4JD03 is not working. The issue seems to be related to the SCV setup panel. That's all the information I have at the moment.

—> Purchase or Repair:
#John Deere by G K SEYMOUR on 2015-07-18 08:20
Can the John Deere RE64583 7SUD3JD01 SCV Setup Panel be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Derek Baker on 2016-03-23 17:19
John Deere 120974T AT167497 Monitor is malfunctioning, impacting production line efficiency. Urgent repair needed to resume operations

—> Purchase or Repair:
#John Deere by fatah on 2015-07-12 16:20
Hi there, we have a John Deere RE66265 Digital Tachometer that needs repair or replacement. Can you provide guidance on how to fix it or where to find a replacement part? Please reply ASAP. Thank you!

—> Purchase or Repair:
#John Deere by Foot Young on 2015-07-23 20:20
John Deere RE64583 7SUD3JD01 SCV Setup Panel is displaying an error message and preventing production from going online.

—> Purchase or Repair:
#John Deere by Ha on 2026-05-25 19:18
Request Service for John DeereModel/Part : Re173829 Baler Unit

—> Purchase or Repair:
#John Deere by Al Schrock on 2013-08-13 10:35
Could you please confirm if the John Deere RE64583 7SUD5JD04 SCV setup panel is still supported and if replacement parts are available? Your

—> Purchase or Repair:
#John Deere by Bud Gibson on 2013-09-09 00:00
Experiencing malfunction with John Deere AH2244250 electronic control unit. Device not responding to commands or displaying error codes. Urgent repair needed.

—> Purchase or Repair:
#John Deere by George Hostutler on 2013-04-05 19:37
The John Deere RE64583 7SUD5JD04 is displaying error code E342. The SCV setup panel is unresponsive, preventing operation of the equipment. Please advise on troubleshooting steps or necessary repairs. Thank you.

—> Purchase or Repair:
#John Deere by Frank Taylor on 2015-07-17 09:20
I'm currently experiencing some issues with the SCV Setup Panel on my John Deere RE65483 7SUD5JD04. Something seems to have stopped working and I'm not sure how to fix it. Your assistance in resolving this matter would be greatly appreciated.

—> Purchase or Repair:
#John Deere by rami on 2015-07-13 01:32
Equipment Down John Deere RE64583 7SUD3JD01Issue SCV Setup Panel not functioningSymptom Not responding to inputsPlease advise on possible error codes or alarms.

—> Purchase or Repair:
#John Deere by Suliman on 2015-03-09 12:13
Looking for repair for John Deere RE66265 digital tachometer. The unit is not displaying any readings and seems completely dead. Need assistance from a professional technician.

—> Purchase or Repair:
#John Deere by Sehm on 2015-07-15 04:20
Hi there, the John Deere RE66265 Digital Tachometer is displaying error code E4. Equipment is not registering engine RPMs accurately. Kindly advise on troubleshooting steps needed for proper diagnosis and repair. Thank you.

—> Purchase or Repair:
#John Deere by Leung on 2015-08-05 10:20
The John Deere RE64583 7SUD5JD04 is a SCV Setup Panel that isn't working. The maintenance team needs to take a look at it.

—> Purchase or Repair:
#John Deere by Senthil on 2015-08-09 23:20
The John Deere RE64583 7SUD5JD04 SCV Setup Panel is not functioning as expected. The unit is displaying unusual behavior, which is different from its normal operation.

—> Purchase or Repair:
#John Deere by Nikolay Georgiev on 2015-07-17 21:20
The tachometer on John Deere RE49192 7THM2JD03 is not working.

—> Purchase or Repair:
#John Deere by Paulo Da Silva on 2013-05-23 14:58
The John Deere Bale Trak Plus RE159944 Bale Monitor is not working in the shop.

—> Purchase or Repair:
#John Deere by Gary Denemark on 2015-07-28 14:20
Hello, we have a John Deere part AT320355 AT320694, the CAN Monitor Unit, that needs repair but we can't find a replacement. Please provide repair information or options as soon as possible. Thank you.

—> Purchase or Repair:
#John Deere by Ha on 2026-05-25 19:18
Request Service for John DeereModel/Part : Re173829 Baler Unit

—> Purchase or Repair:
#John Deere by Kanishka Weerathunge on 2015-04-23 21:05
John Deere RE65483 7SUD5JD04 showing error message "SCV Setup Panel Malfunction" - production halted.

—> Purchase or Repair:
#John Deere by runyan on 2010-09-09 19:51
The digital display on the John Deere Motorola RE64583 is malfunctioning, disrupting the production line. Urgent repair is required to restore operations

—> Purchase or Repair:
#John Deere by Ivan Alarcon on 2014-12-25 05:06
It seems like there may be an issue with the motor control on your John Deere RE64583. Something seems to have stopped working properly, but I'll do my best to help you figure out what's going on. Let's work together to troubleshoot and get your machine back in good working order. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by Bernd on 2011-11-15 16:47
I'm sorry to hear about the issue with your John Deere RE66821 7AT6JD01 Analog Tachometer. It seems like something may have stopped working properly. I recommend reaching out to a technician for a detailed evaluation.

—> Purchase or Repair:
#John Deere by radu on 2014-02-15 13:58
The John Deere RE64583 7SUD5JD04 is down due to a MOTOR CONTROL issue. Please follow up during the day. Thank you.

—> Purchase or Repair:
#John Deere by bouzid on 2015-02-23 05:47
Equipment down due to faulty tachometer (John Deere RE49192 7THM2JD03). No display on screen, possible internal connection issue. Need urgent repair.

—> Purchase or Repair:
#John Deere by Halder on 2014-02-12 23:58
John Deere RE43902 7MRT2JD02 controller malfunction causing production line downtime. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#John Deere by Ginsburg on 2013-02-19 06:27
I will send a message regarding the non-functioning John Deere RE64583 7SUD5JD04 unit.

—> Purchase or Repair:
#John Deere by larry palmer on 2025-06-08 07:22
Do you have a John Deere RE218346 controller available for sale or for repair? Need it urgently to keep production running.

—> Purchase or Repair:
#John Deere by J.den on 2013-07-10 00:32
The John Deere RE64583 7SUD5JD04 SCV setup panel is not working as reported by someone from the shop.

—> Purchase or Repair:
#John Deere by syarif hidayat on 2013-08-13 13:35
The John Deere Bale Trak Plus RE159944 is failing to display accurate bale counts and is not registering bale sizes correctly. This issue is affecting the production line efficiency and needs immediate attention to prevent further delays.

—> Purchase or Repair:
#John Deere by TT on 2014-04-03 16:29
The John Deere RE43902 7MRT2JD02 Controller is malfunctioning, causing a halt in production. Urgent repair is needed to get the line running smoothly again.

—> Purchase or Repair:
#John Deere by Bateman on 2014-01-18 03:45
The John Deere RE43902 controller is not working. Please check and repair as needed.

—> Purchase or Repair:
#John Deere by David Wilhelm on 2026-02-05 06:57
Request Service for John DeereModel/Part : Re208064 DisplayCrossed the battery leads which burned the fusable link. After that event the gauges work, but are not accurate or repeatable.

—> Purchase or Repair:
#John Deere by Jacob Bergen on 2024-08-23 10:45
I have a John Deere RE219402 controller that is not functioning properly. The unit fails to power on and does not respond to any input commands. I have attempted to troubleshoot the issue by checking all connections and ensuring proper power supply, but the problem persists. Based on my assessment, …Purchase or Repair: Ticket Image...
Show More
#John Deere by Neill on 2013-08-03 03:32
The John Deere RE64583 7SUD5JD04 SCV setup panel seems to be experiencing unusual behavior in the warehouse. It is not functioning as it normally does, displaying strange actions that are out of the ordinary.

—> Purchase or Repair:
#John Deere by Kohloff on 2013-08-07 08:32
John Deere RE63440 7SUD4JD03 is experiencing issues with the SCV setup Panel, causing a slowdown in production. Please address this urgently to minimize downtime.

—> Purchase or Repair:
#John Deere by Braun on 2014-04-14 09:32
The John Deere RE64583 7SUD3JD01 SCV Setup panel is displaying erratic behavior and not functioning as expected.

—> Purchase or Repair:
#John Deere by Roslin on 2025-06-03 23:52
Can the John Deere RE551415 controller be repaired, or should it be replaced? I'm trying to get this fixed or replaced to check it off my to-do list. Thank you.

—> Purchase or Repair:
#John Deere by gang on 2016-06-01 06:22
John Deere RE172237 7VMU0JD01 Vehicle Monitor Not displaying any data or responding to inputs.

—> Purchase or Repair:
#John Deere by wiebe on 2015-02-07 01:52
Could you please confirm if the John Deere RE64583 7SUD5JD04 SCV Setup Panel is still supported, and if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#John Deere by LIM WEI SIANG on 2013-04-12 08:15
The John Deere Bale Trak Plus RE159944, which I believe is a Bale Monitor, seems to have stopped working. I'm not clear on the specifics of its functions, but it appears there is an issue that needs attention.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.