John Deere Service & Repair Forum

I believe there's an issue with the digital tachometer on the John Deere RE66265 7MRT8JDO1E. It seems like the digital display has stopped working properly. Would you like me to investigate further or seek help from a technician?

—> Purchase or Repair: Ticket Image

— Posted by s b sharma on 2015-07-31

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by hejl on 2011-08-15 22:09
Could you please provide details on troubleshooting and repairing a John Deere RE66821 7AT6JD01 Analog Tachometer? My client is experiencing issues with it. Thank you.

—> Purchase or Repair:
#John Deere by roger moutal on 2015-02-02 18:39
I'm interested in buying the John Deere RE65483 7SUD5JD04 SCV Setup Panel. Could you please provide information on pricing and availability? We're looking to source one quickly. Thank you.

—> Purchase or Repair:
#John Deere by Caps on 2016-11-22 14:01
Drive or board failure on John Deere RE66264 7MRT6JD01 digital tachometer. Need to troubleshoot and replace to get it back up and running.

—> Purchase or Repair:
#John Deere by Al Schrock on 2013-05-25 15:24
Our John Deere RE64583 7SUD5JD04 is still down. Please provide assistance and get back to me as soon as possible. Thank you.

—> Purchase or Repair:
#John Deere by Kanishka Weerathunge on 2015-04-23 21:05
John Deere RE65483 7SUD5JD04 showing error message "SCV Setup Panel Malfunction" - production halted.

—> Purchase or Repair:
#John Deere by Wisnu R Maulana on 2015-03-10 05:13
Please provide an update on the status of my John Deere RE66265 7MRT8JDO1E Digital Tachometer. This issue needs

—> Purchase or Repair:
#John Deere by S.RAVINDRANATH on 2013-03-25 15:32
I am following up on my previous message regarding the John Deere RE63440 7SUD4JD03 unit being down. Please provide assistance

—> Purchase or Repair:
#John Deere by Eddie Samaniego on 2015-04-27 18:58
I can assist you with that. I will check if the John Deere RE66265 7MRT8JDO1E digital tachometer is still supported or if replacement parts are available.

—> Purchase or Repair:
#John Deere by ahmed gomaa on 2015-07-08 23:32
Hi, the John Deere RE64583 7SUD3JD01 is showing error code SCV Setup Panel. Equipment is currently down and in need of urgent repair. Thank you.

—> Purchase or Repair:
#John Deere by Muhammad khan Attari on 2015-03-09 06:13
The John Deere AT320355 AT320694 CAN Monitor Unit is not working as reported.

—> Purchase or Repair:
#John Deere by Vasileios on 2011-01-12 08:23
Can you please confirm if the John Deere RE66821 Analog Tachometer is still supported or if there are replacement parts available? Thank you.

—> Purchase or Repair:
#John Deere by Halder on 2014-02-12 23:58
John Deere RE43902 7MRT2JD02 controller malfunction causing production line downtime. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#John Deere by Osvaldo on 2013-08-11 03:35
Can the John Deere RE64583 7SUD5JD04 SCV Setup panel be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by Tj on 2015-07-21 11:20
The unit is described as SCV Setup Panel and it is not working as expected on the John Deere RE64583 7SUD5JD04.

—> Purchase or Repair:
#John Deere by john lowrey on 2015-07-12 13:32
We experienced downtime with the John Deere RE65483 7SUD5JD04 due to issues with the SCV Setup Panel. The incident occurred during our shift yesterday from 10 AM to 2 PM. Please provide feedback or instructions before the next shift begins. Thank you.

—> Purchase or Repair:
#John Deere by Ron Geiser on 2013-08-15 10:32
Could you please confirm if the John Deere RE64583 7SUD5JD04 SCV Setup panel is still supported or if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#John Deere by Stith on 2014-12-25 19:06
Experiencing issues with my John Deere RE43902 7MRT2JD02 controller unit. Need repairs or troubleshooting assistance.

—> Purchase or Repair:
#John Deere by sergio garcia on 2019-08-23 21:44
: Our industrial oven has stopped working properly. It will turn on but won't heat up consistently and is fluctuating between high and low temperature ranges. This issue prevents us from completing our baking tasks efficiently, which significantly impacts production deadlines and quality control. Ba…Purchase or Repair: Ticket Image...
Show More
#John Deere by Nikita on 2013-07-23 20:32
SCV setup Panel on John Deere RE63440 7SUD4JD03 is not responding.

—> Purchase or Repair:
#John Deere by bill whitacre on 2013-07-29 02:32
Looks like we've got a problem with the SCV setup panel on the John Deere RE64583 7SUD5JD04. Drive or board failure, need immediate attention.

—> Purchase or Repair:
#John Deere by Bruno Arca on 2013-08-13 20:35
Do you have a John Deere Bale Trak Plus RE159944 available for sale or repair? Our unit has gone down, and we need to get production up and running quickly.

—> Purchase or Repair:
#John Deere by Su on 2013-12-12 20:58
John Deere RE63440 7SUD4JD03 SCV setup Panel unit went down mid-shift. Needs attention ASAP.

—> Purchase or Repair:
#John Deere by Doug Crosby on 2013-03-25 23:32
Having issues with my John Deere RE64583 7SUD5JD04 SCV setup panel. Need a repair expert to fix it

—> Purchase or Repair:
#John Deere by THOMAS WHITE on 2015-01-07 08:41
The John Deere RE64583 7SUD5JD04 experienced downtime due to an issue with the SCV Setup Panel. The incident occurred earlier this shift, and I am seeking a quick answer before the next shift begins. Thank you for your

—> Purchase or Repair:
#John Deere by film on 2015-07-28 12:20
Unit RE46704 7AT2JD01 experienced downtime due to the Tach Display not coming on when cold. This issue occurred during the night shift and is currently affecting production. Please advise on a solution before the next shift starts.

—> Purchase or Repair:
#John Deere by Siddiqui on 2015-01-12 19:41
Please provide an update on the repair status of the John Deere RE66265 Digital Tachometer (7MRT8JDO1E) immediately. Your

—> Purchase or Repair:
#John Deere by Chidester on 2015-08-08 01:20
The John Deere RE49192 7THM2JD03 Tachometer is not functioning as expected.

—> Purchase or Repair:
#John Deere by Basson on 2013-03-20 09:49
The Bale Trak Plus RE159944 is displaying error code E01.

—> Purchase or Repair:
#John Deere by brian egan on 2014-01-07 11:22
The John Deere RE64583 7SUD5JD04 is displaying ERROR CODE 305 - MOTOR CONTROL FAILURE. Equipment is currently down, urgent assistance needed.

—> Purchase or Repair:
#John Deere by Nathan Arnold on 2016-01-15 22:00
The John Deere RE172237 7VMU0JD01 Vehicle Monitor is failing to display critical information, causing delays in monitoring production processes. Immediate repair is needed to ensure optimal functioning of the production line.

—> Purchase or Repair:
#John Deere by Marius on 2015-01-05 22:41
John Deere RE64583 7SUD5JD04 SCV Setup Panel down. Needs attention ASAP. Please check and repair in the morning. Thank you!

—> Purchase or Repair:
#John Deere by calvin haines on 2010-08-15 13:28
The unit with the digital display (John Deere Motorola RE64583) in the warehouse is exhibiting abnormal behavior. The display is flickering intermittently, and some of the buttons are not responding properly. It seems to be freezing up occasionally as well.

—> Purchase or Repair:
#John Deere by darren kotzur on 2011-06-07 19:38
Can the John Deere RE66821 7AT6JD01 Analog Tachometer be repaired or purchased to resolve the issue? Checking this off my to-do list.

—> Purchase or Repair:
#John Deere by fatih on 2016-02-18 12:03
We experienced downtime on the John Deere RE66264 7MRT6JD01 Digital Tachometer unit earlier today at 230 PM. Need to investigate the cause

—> Purchase or Repair:
#John Deere by Zia on 2013-10-21 12:49
I believe there might be an issue with the SCV setup panel on your John Deere RE64583. It seems like something has stopped working, but I'm not exactly sure what it does. I would recommend getting it checked by a professional to diagnose the problem accurately.

—> Purchase or Repair:
#John Deere by Richard Byrd on 2013-04-30 03:05
I'm experiencing an issue with the SCV setup panel on my John Deere RE64583 7SUD5JD04. Something seems to have stopped working, and I'm not sure what the exact problem is. Any guidance or assistance would be greatly appreciated.

—> Purchase or Repair:
#John Deere by LIM WEI SIANG on 2013-04-12 08:15
The John Deere Bale Trak Plus RE159944, which I believe is a Bale Monitor, seems to have stopped working. I'm not clear on the specifics of its functions, but it appears there is an issue that needs attention.

—> Purchase or Repair:
#John Deere by Bryan Sutherland on 2013-08-12 11:32
Do you have a John Deere RE64583 7SUD5JD04 SCV setup panel available for sale or repair? It's urgent as we need to keep production running smoothly. Thank you.

—> Purchase or Repair:
#John Deere by Josip on 2015-08-08 08:20
The John Deere AT320355 AT320694 CAN Monitor Unit malfunctioned yesterday during the night shift, causing unexpected downtime. Can you quickly provide an update on what went wrong and when it started? It's important to address this before the next shift begins.

—> Purchase or Repair:
#John Deere by MackMillions on 2013-08-18 15:32
The display on the John Deere Bale Trak Plus RE159944 Bale Monitor is flickering erratically, making it difficult to accurately monitor bale production. This issue needs immediate attention to prevent disruptions to the production line.

—> Purchase or Repair:
#John Deere by Les Abend on 2015-08-08 05:20
Could you please provide repair information for a John Deere RE64583 7SUD5JD04 SCV Setup Panel? We need a replacement part urgently, but can't locate one. Your

—> Purchase or Repair:
#John Deere by audrey on 2014-12-28 13:06
John Deere RE43902 7MRT2JD02 controller not powering on.

—> Purchase or Repair:
#John Deere by cotrus on 2015-07-13 10:20
Please follow up immediately regarding the John Deere AT320355 AT320694 CAN Monitor Unit. It is still not functioning, and we need a resolution as soon as possible.

—> Purchase or Repair:
#John Deere by Dorothy on 2015-08-14 01:20
Unit RE65483 7SUD5JD04 is down due to SCV Setup Panel issue. Please check and fix it during the day shift. Thank you!

—> Purchase or Repair:
#John Deere by Nadid Burbar on 2013-04-18 11:48
John Deere Bale Trak Plus RE159944 is down. Need checking during the day shift.

—> Purchase or Repair:
#John Deere by Hopf on 2013-07-23 03:32
Please provide me with information on the availability of support or replacement parts for the John Deere RE64583 7SUD5JD04 SCV Setup panel. Thank you.

—> Purchase or Repair:
#John Deere by ilbay on 2014-11-01 20:57
Experiencing issues with my John Deere RE43902 7MRT2JD02 controller, not functioning properly. Looking for a skilled technician to diagnose and repair as soon as possible.

—> Purchase or Repair:
#John Deere by Rheal Guilbault on 2013-08-13 01:32
Bale Trak Plus RE159944 unit malfunctioned mid-shift. Please check and repair tomorrow.

—> Purchase or Repair:
#John Deere by Peter Winter on 2010-04-15 20:57
Our John Deere Motorola RE64583 digital display unit is still down. Please provide a response at your earliest convenience. Thank you.

—> Purchase or Repair:
#John Deere by Robert Schmitt on 2013-12-30 19:27
Could you please provide some guidance and information regarding troubleshooting and repairing a John Deere RE64583 7SUD5JD04 SCV setup panel? My client is experiencing issues with it and requires assistance. Thank you for your support.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.