K Service & Repair Forum

If you need your K tested or repaired then give us a call. We offer free estimates and offer extended warranties. You can contact us at 1-(336)-969-0110 Shipping/Receiving Industrial Electronic Repair 931-E S. Main St #204, Kernersville, NC 27284 Phone: (336) 969-0110 We repair industrial electronic devices If you have an industrial electronic device that needs repair, Feel free to contact us!

β€” Posted by Sales on 2005-05-09

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "K"

If you need your K unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 626 Comments

#Kuhnke by Duperron on 2025-05-18 19:09
Unit Kuhnke 86 850 1000 01 down. Unknown issue. Needs attention. Follow up in the morning.

β€”> Purchase or Repair:
#K.E.W by Richard Lane on 2008-12-24 11:32
HelloI have a kew 1502 steam cleaner which has a problem with the burner. It will run for about 5 seconds then cut out, I have changed the diesel filter and cleaned the filter into the nozzle. Also I have checked that the electrodes are working properly. Its as if something is turning the diesel sup…...
Show More
#Krom Schroder by Craig Pickenpaugh on 2010-02-10 05:00
Hello, I'm reaching out on behalf of a client who is in need of assistance with a Krom Schroder IFS 285T-5/2R 84620440 Burner Control. Could you please provide information or guidance on resolving the issue with this part? Thank you.

β€”> Purchase or Repair:
#Keys Health by KENNY BOUDREAUX on 2015-08-04 14:20
Hi there, can you please provide repair information for a Keys Health AE02 08-0051 treadmill? Thank you!

β€”> Purchase or Repair:
#Klockner-Moeller by Charles A. Bulluck on 2022-04-10 18:34
Inquiry about Pricing and Availability for Klockner-Moeller MI4-471-TC1Hello ,I hope this message finds you well. I am interested in purchasing a Klockner-Moeller MI4-471-TC1 Operator Interface Touch Panel for a repair project I am working on. However, I would like to inquire about the pricing and a…Purchase or Repair: Ticket Image...
Show More
#K.E.W by cindy janeski on 2009-05-28 18:35
I am looking for a shop that carries replacement parts for a KEW pressure washer, the hose has sprung a leak and need to replace it the spray nozzle is also attached to the hose as a all in one unit
#Kds Systems by adam bruneau on 2008-11-21 06:02
quote for mailing me a replacement cable. it has a flaw in the vga+ power cable. now while i would have no problem splicing the cable my wife requests that i purchase the cable call or email me please.

β€”> Purchase or Repair:
#Kensol by mishra on 2015-07-19 00:00
Machine not responding to input commands. Production halted. Need urgent repair to Control Unit.

β€”> Purchase or Repair:
#Krom Schroder by mrajamouli on 2010-03-26 11:03
I need urgent support for the Krom Schroder IFS 285T-5/2R 84620440 burner control unit. It caused downtime during our shift. Can you provide a brief explanation of what happened and when? Help needed ASAP before the next shift starts.

β€”> Purchase or Repair:
#Kw Battery Company by Cal Nichols on 2009-08-27 13:44
I have a Clark EC50 FL andand looking for a battery pack36 v20\"d x 32 7/8\" w x 25\" L

β€”> Purchase or Repair:
#K.E.W by Hartono on 2011-10-19 06:46
Dear AllPlease give me the information about Services center KEW 0901V In indonesia , for your best cooperation i would to say many thanks
#Klockner-Bartelt by Ray Loera on 2008-07-29 22:47
Machine # 1:Hopper agitator not working. Machine #2: timing belt for pouches is incorrect
#Kw Battery Company by Wendell Werner on 2012-05-11 16:30
I am looking for a replacement timer for a KW battery charger.The model is 18-600F3B-21, serial K8126, spec B8720T F. Do you sell parts for this charger, or do you know where I can purchase parts?

β€”> Purchase or Repair:
#K.E.W by larry on 2009-03-26 07:25
need to find out how to change the unit from 110 volts to 220 volts. thanks
#Kaiser Systems by John Kennedy on 2013-05-07 23:27
Can the Kaiser Systems LS202LV1 1101503 Power Supply be repaired or purchased? I'm trying to check this off my to-do list. Thank you.

β€”> Purchase or Repair:
One of the drives or boards on the Kiddie Rides USA MSW-100 DM2030 hand dryer just failed. Will investigate and repair ASAP to keep it operational.

β€”> Purchase or Repair:
#KSI by J. Perkins on 2014-02-13 16:58
The KSI S20-100-200 1101104-2 power supply unit went down during the night shift. Please investigate further and address the issue

β€”> Purchase or Repair:
#Kaiser by Brian Thomason on 2013-08-11 17:32
Kaiser LS202LV1 1101503 not working.

β€”> Purchase or Repair:
#K.E.W by dan lucas on 2013-03-13 22:08
hi i brought this k.e.w h1500 steam cleaner some year ago,i put it away after it was working ok over 12month ago.i lent it to my brother and it will not pressure up.....his any one out there i can ring to get parts so i can fix it thx 07779666678
#KSI by Anthony Woods on 2014-11-02 02:57
The KSI S20-100-200 1101104-2 Power Supply is causing a major disruption in production. Immediate repair service is crucial to avoid further downtime. Please address this issue urgently to restore operations.

β€”> Purchase or Repair:
#KME by NISSAR WANI on 2008-02-09 05:37
KME 00 26S12M004/A monitor not displaying any image.

β€”> Purchase or Repair:
#Krom Schroder by Larry Ringhand on 2010-01-31 08:03
Hello, I'm inquiring about a Krom Schroder IFS 285T-5/2R 84620440, which is a Burner Control unit. My client is experiencing some issues with it. Could you please provide information regarding troubleshooting and repair options for this specific part? Thank you.

β€”> Purchase or Repair:
#Komatsu by Troy Walker on 2011-07-25 10:49
issue with the Komatsu PC.100.120 controller (part number 7824-30-1100) - drive or board failure. Heading to check it out now.

β€”> Purchase or Repair:
#K.E.W by reidar kvalvik on 2010-04-19 13:53
Hi.I need reper manual for KEW royalBest regards Reidar Kvalvik
#Kouwa by Ying on 2019-05-28 02:56
Dear all :We are looking control Board, P/N : NAYUTA NB-584 01855B = 1 unit. Pls advice your price + freight cost + lead time to us.Best regards,Ms. Ying

β€”> Purchase or Repair:
#Kouwa by Menissier on 2020-04-24 08:49
bonjour je recherche un compresseur R407C KOUWA LIQUD TUNER KMV-150-M14TARIF + FRAIS DE PORT ET DELAISSALUTAITONS

β€”> Purchase or Repair:
#KEB by Morgen on 2025-05-26 17:36
Hello, following up on my previous message about the KEB 10.S4.D30-4102 unit still being down. Please provide assistance

β€”> Purchase or Repair:
#K.E.W by REYGAN on 2008-11-06 11:58
my steam cleaner 1640h is showing alarm F1 could anybody help me to find out the reason or send me manual of this machine thanksreygan bernard
#Komatsu-Dresser by tim marshall on 2010-01-25 04:43
Hi there,Do you happen to have a controller for a komastu pc 150. The serial number is pc150-K30272 or the serial number of the controller is 21230 or part 7834-24-2001?Look forward to your reply.Thanks\\Tim
#Klaus Rothenburg by FΓ‘bio on 2021-01-29 21:46
Helo, my name is FΓ‘bio.I working into graphics industries and need informations and eletric diagram for a LED DISPLAY.In Eleltronics Boards have word "KLAUS ROTHENBURG GmBH".You could help me?Thanks for attentions
#K.E.W by Grant Neeley on 2012-01-24 13:44
I have a KEW 23A2V pressure washer that the boiler Coil is completely shot now. I have welded some hole back together, but now it is beyond repair. Does anyone know where I can get a replacement coil?
#Kouwa by Myles Opheim on 2011-01-21 17:59
Check to see if you have a Sanyo, model number C-2RN153H3A-tse or possibly a Toshiba TH207JA / TG240X2-FLwww.smallchiller.com

β€”> Purchase or Repair:
#Kaiser by Raffy Valdriz on 2013-07-24 12:32
Please confirm if the Kaiser LS202LV1 1101503 high volt power supply unit is still supported or if replacement parts are available. Thank you.

β€”> Purchase or Repair:
#K.E.W by Chris bolton on 2009-07-10 15:22
My Kew is not building up pressure can you tell me why please
#Kontron by iHIV on 2011-12-02 00:30
Do you have a replacement Kontron 02004-0005-08-2 SBC available for purchase or repair? Our production is halted, and we need to get it running again quickly.

β€”> Purchase or Repair:
#Keba by bryan street on 2007-07-12 00:00
URGENT Follow-Up Needed Keba HT-401 Handterminal DownDear Team,I am following up on my previous message regarding the Keba HT-401 Handterminal that is still down. This issue needs immediate attention to avoid further disruptions. Can someone please provide an update on the status of the repair and w…Purchase or Repair: Ticket Image...
Show More
#KME by Gilberto Arbelaez on 2008-08-18 05:28
The KME 00 26S12M004/A monitor unit is not working.

β€”> Purchase or Repair:
#Klockner-Bartelt by Edwin Connor on 2006-12-13 03:31
New tech support rep for Alcoa pharma group, lookinf for info on your equipment blister and pouch equipment. Would also like operating principles common adjustment as it relates to registration and print.Thank youEdwin Connor
#Kaiser by Hesham Farouk Ibrahim on 2013-08-13 09:35
The Kaiser LS202LV1 1101503 unit isn't working. It's a high volt power supply.

β€”> Purchase or Repair:
#Kay-Ray by Welding on 2022-05-16 18:15
The Kay-Ray ACCU-PULSE SOLID machine is malfunctioning with error code E14 on the display. This is affecting the production line, causing delays and errors in the output. Immediate repair service is required to resolve the issue and get the production line back up and running efficiently.
#Kontron Electronix by kerry on 2005-12-21 12:47
The Kontron Electronix 3-114 2-A092-002 CNC Monitor & Computer is malfunctioning, impacting production on the line. Need immediate repair service to avoid further delays.

β€”> Purchase or Repair:
#Klockner-Ferromatik by paul andeson on 2012-02-14 11:23
i get set 12 which says locking pressure build up , pressure switche 27 must switch..i cant seem to resolve this problem, if there is anyway someone could help i would relived to sort this out.many thankspaul anderson
#Keys Health by Garagozov on 2011-05-28 15:17
Hello, I represent a client who needs assistance with the Keys Health part 08-0016 (power supply). Can you please provide information on repair options and estimated costs for this item? Thank you.

β€”> Purchase or Repair:
#Keb Antriebstechnik Gmbh by k.murugan on 2009-12-07 13:18
we want to repair a keb turbine drive for laser cutting machine

β€”> Purchase or Repair:
#Komatsu by PT. Richsindo Binatama on 2011-06-23 04:36
Hi, the Komatsu PC.100.120 is currently down due to an issue with the controller (part number 7824-30-1100). The equipment is displaying error code and is non-operational. Please advise on necessary steps for troubleshooting and repair. Thank you.

β€”> Purchase or Repair:
#KIP by Paul Carey on 2015-07-24 17:20
KIP MAIN CONTROLLER ASSEMBLY QM3-5819-000-RFB is experiencing a power supply failure, causing the machine not to power on.

β€”> Purchase or Repair:
#Kubota by Mark Jewell on 2007-03-30 00:00
Kubota 1J508-59051 controller not responding to inputs. Need immediate repair assistance.

β€”> Purchase or Repair:
#Klockner-Desma by Israel SΓ‘nchez on 2025-06-09 09:13
Hello, we have a Klockner-Desma R10C5233232X043 controller that needs repair. We can't find a replacement and we need repair info urgently. Can you assist us with this issue? Thank you.

β€”> Purchase or Repair:
#Kouwa by Kyle Weeks on 2022-03-16 12:57
Have an Eu alarm on a brand new Kouwa chiller unit on a Mazak ST550. can not clear. Any suggestions?

β€”> Purchase or Repair:
#K.E.W by SHABAN LIMANI on 2010-03-01 19:16
guten abent icsh bin ljimani cshaban aus macedonia tetovo icsh brauche eine pumpe for choch druck for kew 1502und kene cshiken in macedonia und kenen preis ceigen bite und in duetsh ich veis bite und in meine email cshriben bite filen dank fur das

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.