Troubleshooting K.E.W: Common problems and repair info

K.E.W for Service call 1-336-969-0110 at Industrial Electronics Repair

K.E.W Service & Repair Forum

I am looking a the circuit board for my 0840HA hot water pressure washer. Mine burned out, the rest of the machine is nearly new. It would be a shame to trash it. KEW no longer makes this board.

— Posted by john farkas on 2011-10-26

Reply🗨️Ask a New Question Below❓

Recent 95 Comments

#K.E.W by David Kerr on 2009-06-12 19:28

Hi, Help please, i\'m in need of a new lance for my older Kew Hobby 2600, would you have this item in stock ?

➡️ Reply

#K.E.W by Arvid Hartsuiker on 2008-11-11 18:15

Front seal on pump leaking, looking for parts to repair and repair manual. Please give me a call or email. Thanks Arvid

➡️ Reply

#K.E.W by mark on 2014-10-21 13:50

hi could you tell me where I would get service manual for kew 1640hathanks mark

➡️ Reply

#K.E.W by ali on 2009-05-31 05:45

I\'m looking for the maintenance manual for this machine

➡️ Reply

#K.E.W by Tim on 2009-09-28 17:42

I am looking for a seal kit for the pump on this unit if you can get one please email me back.

➡️ Reply

#K.E.W by dan johnson on 2007-05-28 23:54

I am trying to find out any info on this Kew (0802v-56)steam washer. If someone has a manual available, that would be great.

➡️ Reply

#K.E.W by Garry S James on 2009-04-09 10:26

I have a KEW 1502V – Hot & Cold Pressure Washer. I will be running this of a Generator at the same time as a water pump which has a rating of 700w.1. Can you what is the start up current of the Pressure Washer.2. What size Generator should I be looking for to run the Pressure Water and the Water Pum…...
Show More

➡️ Reply

#K.E.W by thijs thissen on 2009-07-13 08:11

We have recently purchased an second hand KEW high pressure cleaner but it does not get the full cleaning pressure. Can I recieve an owners manual by email to see what parts may be broekn in order to fix the machine?Thank you in advance.best regards,Thijs.

➡️ Reply

#K.E.W by Clifford Brown on 2010-10-10 03:46

I still do not have all the details of what this machine is, but it appears to be a hot water pressure washer.. Would be interested in the instructions manual to see if I can get it going. Do not have all of the ID place numbers copied down yet though. The copper windings for the boiler look good fr…...
Show More

➡️ Reply

#K.E.W by Richard Lane on 2008-12-24 11:32

HelloI have a kew 1502 steam cleaner which has a problem with the burner. It will run for about 5 seconds then cut out, I have changed the diesel filter and cleaned the filter into the nozzle. Also I have checked that the electrodes are working properly. Its as if something is turning the diesel sup…...
Show More

➡️ Reply

#K.E.W by JAMES FARMER on 2016-05-02 19:22

the fuel will not pump, I don`t have the voltage coming out of the oil area of the board to open the solenoid on the fuel pump. I need a schematic to trace the problem, is there one available ?

➡️ Reply

#K.E.W by lyndon hammill on 2006-11-06 19:24

All the lights on the temp gauge lit means that the fuel tankis empty. If there is fuel in the tank, there may not be enoughto activate the tank sensor. put more fuel in.If the tank is full,the tank sender is faulty. It will need replacing.In the meentime you can bypass the tank sender by shorting o…...
Show More

➡️ Reply

#K.E.W by Bodengien on 2017-12-18 08:27

HelloBought a secand hand KEW38A2VA and overhauld and cleanend the machine. The boiler doesnt start however. Can I get a manual for the machine ?? Thanks in advance. Bodengien.

➡️ Reply

#K.E.W by m j cars on 2011-03-17 11:08

when i turn the machine on it trips the electrick

➡️ Reply

#K.E.W by brian breslin on 2009-10-14 19:43

where might I download a user manual for parts and maintenance of my 1640h Thanks Brian

➡️ Reply

#K.E.W by Jeff Osborn on 2009-11-23 21:46

I have recently acquired a K.E.W. Pressure washer and am trying to find information about it. It appears to be from Denmark and in the Model box it just says Hobby. Another box on the ID plate says 62 bar. The gauge on the machine reads 0 to 150 and on the face of the dial it says X 1000. THAT WOULD…...
Show More

➡️ Reply

#K.E.W by reidar kvalvik on 2010-04-19 13:53

Hi.I need reper manual for KEW royalBest regards Reidar Kvalvik

➡️ Reply

#K.E.W by john farkas on 2011-10-26 18:38

I am looking a the circuit board for my 0840HA hot water pressure washer. Mine burned out, the rest of the machine is nearly new. It would be a shame to trash it. KEW no longer makes this board.

➡️ Reply

#K.E.W by Bože Gudelj on 2021-01-28 20:56

KEW 1502 V-66 user manual , service manual

➡️ Reply

#K.E.W by maria helena on 2010-03-17 22:12

i need manual for kew 1640ha

➡️ Reply

#K.E.W by PAUL GALLAGHER on 2008-11-17 21:50

HI,I HAVE JUST PURCHASED A KEW 38A2VA POWER WASHER. IS IT POSSIBLE TO GET A MANUAL FOR THIS MACHINE? ALSO WHAT GOES IN THE TANK MARKED WITH A SNOWFLAKE?THANKS PAUL.

➡️ Reply

#K.E.W by ryan on 2011-04-02 17:51

I have a 1979 kew power washer and am looking for some pump parts or info on where to get parts it is mostly all in good shape put the pump needs work any info would be greatly apresated thanks ryan

➡️ Reply

#K.E.W by Six B Construction on 2008-10-02 15:28

I need a operation manuel for K.E.W. 3803V-103

➡️ Reply

#K.E.W by Amin on 2011-12-28 06:46

I have Kew 1640h i need operating manual,

➡️ Reply

#K.E.W by marcondes on 2010-03-17 22:11

my machine stop work hot water and pressure no good work

➡️ Reply

#K.E.W by Odyssey Winery on 2010-08-23 21:14

I have a KEW pressure washer, model 0840HA. I am receiving intermittant F2 error codes and C4 error codes. I have taken it into my dealer for \"repair\" however the problem continues. Any ideas?

➡️ Reply

#K.E.W by Kevin Gonneau on 2007-05-07 19:40

Looking for parts manual of help with parts for Unit Model #3803V-103 1985/40No.# 2104067 240v/1/30 ampAny help would be greatly appreciated.

➡️ Reply

#K.E.W by cindy janeski on 2009-05-28 18:35

I am looking for a shop that carries replacement parts for a KEW pressure washer, the hose has sprung a leak and need to replace it the spray nozzle is also attached to the hose as a all in one unit

➡️ Reply

#K.E.W by Tom Duclos on 2016-05-31 14:22

Need transformer for above unit part number #3819901 can you help me..

➡️ Reply

#K.E.W by Anthony blair rowland on 2012-06-04 19:58

Please can you help i have a kew 1502v it will run fine cold, as soon as i demand heat it runs for 5 seconds and switches off if you switch it on & off,it runs for 5seconds and it will do this all day. what is the solution please

➡️ Reply

#K.E.W by john farkas on 2011-10-26 18:47

For any KEW products call Chris Gerber in S.C. (877)322-2586. Very knowledgable and helpfull. He is the US service rep.

➡️ Reply

#K.E.W by frank welch on 2010-12-02 13:46

just want to know how old this machine is and if it can still be repaired,i have no knowledge of what year it was made and know of no place to get it repaired

➡️ Reply

#K.E.W by Gerald Mansfield on 2007-10-01 00:46

I purchased a K.E.W. 1500 unit on a sale and would like to get an owners manual/service manual for it. It\'s an electric unit. Thank you, Gerry Mansfield

➡️ Reply

#K.E.W by Serge on 2013-06-13 13:06

HelloI have just purchased a KEW 38A2VA power washer with a faulty heater. Is it possible to get a manual and an exploded view drawing over this machine?Thanks!

➡️ Reply

#K.E.W by William Knee on 2009-03-21 12:25

HI I check all and no start and I am a Electrician

➡️ Reply

#K.E.W by Scott A Wilson I on 2012-07-24 12:43

Hi there.I have A Kew steam cleaner model #0802v-56 And would like to see about getting these manual\'s for this cleaner . Please and thank you . Scott

➡️ Reply

#K.E.W by Owen Torgerson on 2012-03-22 19:12

Great machine, had since new, recently experiencing difficulties acquiring heat.Lots of kerosene, lots of pressure on cold, new fuel spray nozzle...Help

➡️ Reply

#K.E.W by AUSTIN GIBBONS on 2010-03-30 14:40

CAN I BUY A SPARE PART FOR THE ABOVE, IE, THE PRESSURE WASHER AT THE END OF THE LANCE.?WITH THANKS AUSTIN GIBBONS

➡️ Reply

#K.E.W by Martin Ferguson on 2009-07-10 14:10

No comments

➡️ Reply

#K.E.W by dan lucas on 2013-03-13 22:08

hi i brought this k.e.w h1500 steam cleaner some year ago,i put it away after it was working ok over 12month ago.i lent it to my brother and it will not pressure up.....his any one out there i can ring to get parts so i can fix it thx 07779666678

➡️ Reply

#K.E.W by mark on 2008-07-06 07:56

clean out the disel jet, clean out fillter under the fan, make sure u have good tight flexi hose connection, good luck

➡️ Reply

#K.E.W by Joe Duran on 2008-06-13 23:41

Can I find a manual ?I was given one of these to me by a customer. I think I need a special water hose??

➡️ Reply

#K.E.W by sandy stevens on 2009-09-28 13:03

Is there anyway to get a takedown of the pump on my kew steam cleaner the model # 08022-56? A parts book would be good.

➡️ Reply

#K.E.W by mario yasin on 2012-12-04 21:44

i need to fix my pei kew 4503kb pumbe kit and throtecan you fix itthank you

➡️ Reply

#K.E.W by REYGAN on 2008-11-06 11:58

my steam cleaner 1640h is showing alarm F1 could anybody help me to find out the reason or send me manual of this machine thanksreygan bernard

➡️ Reply

#K.E.W by holmeside garage lee scott on 2012-02-13 22:01

i have a kew 1640ha which i am having a bit trouble with reacently when whent to use it it cum up with the fault L1 and now the machine will not start,i was wundering if you could give me a bit help THANKS

➡️ Reply

#K.E.W by leo on 2012-10-14 09:11

DO YOU HAVE A SOLUTION FOR THE OIL VALVE FROM THE BURNERIT WILL NOT GO ON BY WORKING WITH THE MACHINEPRESSION KONTAKTS ARE OKE

➡️ Reply

#K.E.W by Dale on 2009-04-08 00:10

Hi, put a oring kit in pump an still get only tap pressure everything looks good ,keyway on pump motor fine. any ideas. Thanks,

➡️ Reply

#K.E.W by Blair on 2007-08-15 01:10

call windy city equipment located in Elgin, Illinois

➡️ Reply

#K.E.W by gary appleton on 2008-06-10 15:53

i need new hose