L-Tec Service & Repair Forum
Hi, I have a L-TEC brand plasma cutter pcm-7501, p/n 32905, serial a93b41632 and was wondering if I could ask you a question or three about it?My questions are,it will power up fine, and when you select air test, that function works as well. There is no fault light on, but the problem is that the unit will not do a thing when you push the trigger. We have tried changing the tip consumables out with new parts, and checked the trigger also. It tested fine. Is there anything that I could do or test before I bring it in to get it tested? Is there a common problem with these machines that maby i could fix? and lastly, If the circuit board is bad, how much for one and is it even worth fixing this machine.Sorry for the long post and thank you for your help!Ken
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "L-Tec"
- L-Tec → pregunta ↗
- L-TEC → L-Tec PCM-VPI 31746 ↗
- L-Tec → Zundgerat ↗
- L-Tec → L-Tec PCM-32I 680536 ↗
- L-Tec → L-tec PCM-Vpi ↗
- L-Tec → L-TEC PMC 750 ↗
- L-Tec → L-tec PCM750i ↗
- L-Tec → OLD Topic: L-Tec L-TEC Plasma Cutter ↗
- L-Tec → L-Tec 7501 plasma cutter ↗
- L-Tec → L-TEC PCM-VPI parts ↗
- L-Tec → L-Tec price to test & repair PC board ↗
- L-Tec → L-tec co2 welding and cutting equipment ↗
- L-Tec → L-Tec Plasma Machine ↗
- L-Tec → L-Tec Compact aircut 25 diagram ↗
- L-Tec → ENQUIRY # 6518 (MOST MOST URGENT)PLS SEND US QUOTE ↗
- L-Tec → i need encoders ↗
- L-Tec → L-Tec Tourch and cable ↗
- L-Tec → L-TEC 810 /UCNC -8 ↗
- L-Tec → Plasma cutter ↗
- L-Tec → pcm 32i ltech ↗
- L-Tec → L-Tec 810 ↗
- L-Tec → L-Tec troubleshoot ↗
- L-Tec → plasma cutter ↗
- L-Tec → l tec plasma PCM 750 / iec 974-1 ↗
- L-Tec → L-tec plasma cutter ↗
- L-Tec → L-Tec PCM-750i ↗
- L-Tec → ltec plasma cutter ↗
- L-Tec → L-Tec L-TEC Plasma Cutter ↗
- L-Tec → l-tec 810 ↗
- L-Tec → board repair ↗
If you need your L-Tec unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110
Recent 56 Comments
One of the drives or boards just failed on the L-Tec PCM-32i 680536 welding and cutting system. Urgent attention required!
—> Purchase or Repair:
—> Purchase or Repair:
Do you have any L-TEC PCM-VPi 31746 units available for sale or repair? Our welder is down, and we need to keep production running.
—> Purchase or Repair:
—> Purchase or Repair:
I have an L-Tec Plasma Cutter with a capacity of 1-1/2\" thick steel, 230V. It powers OK but the tourch not working. Please do you carry any.
—> Purchase or Repair:
—> Purchase or Repair:
The power turns on, air is going through, the fault light is on, fuse is good, arcs at the gun but will not cut. I have already stuck $1,300.00 into this machine in repairs.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm interested in purchasing the L-TEC PCM-VPi 31746 welder. Could you please provide information on pricing and availability? I'm trying to source one quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The L-Tec PCM-32i 680536 welding unit experienced a breakdown during yesterday's afternoon shift at around 330 pm, causing significant downtime in our operations. Your
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with my L-Tec PCM-32i 680536 welding and cutting system. In need of repair or maintenance services, as the unit is currently out of order. Any recommendations for technicians who can assist with this industrial equipment?
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if you have the L-Tec PCM-32i 680536 welding and cutting system available for sale or repair? Our production is currently affected and we need to get it resolved as soon as possible. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
My L-Tec PCM-32i 680536 industrial unit is malfunctioning during welding and cutting operations. I need a reliable technician to quickly diagnose and repair the issues. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The L-Tec PCM-32i 680536 unit is not working. Maintenance team needs to check it.
—> Purchase or Repair:
—> Purchase or Repair:
i need manual for this Plasma Machine , Model:- PCM-100Plasma Arc,L-TecHope to receive the same.
—> Purchase or Repair:
—> Purchase or Repair:
The problem is probably in the trigger or broken wiring back through the leads. If you have any of the electrical drawings, they should show where to close the connection inside the power supply to fire the torch. If it fires that way your problem is in the leads or trigger.
—> Purchase or Repair:
—> Purchase or Repair:
Kindly tell me how to repair the L-TEC- CB7WB , Model VI502 , there is problem in the holder and also the plasma cutter holder is not available in the local market ,second the holder fot the co2 welding also not working can i purchase it form u thanks give me a call 00923339500248—> …Purchase or Repair: 
...
Show More
Show More
Dear Sir,We would like to introduce ourselves as registered supplier/indenter of various types of machinery/tools/Raw Material/electronics items with many of government and private sector organizations in our territory. One of our customers would like to purchase below mentioned items on urgent basi…Purchase or Repair: 
...
Show More
Show More
The L-Tec PCM-32i 680536 unit in the warehouse is experiencing abnormal behavior. It is not functioning normally, although I'm unsure what this behavior is called.
—> Purchase or Repair:
—> Purchase or Repair:
Can the L-TEC PCM-VPi 31746 Welder be repaired or replaced? Trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
The L-Tec PCM-32i 680536 is displaying error code E-204. The arc is not initiating when the trigger is pressed. Need assistance ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
I have an L-Tec PCM750i plasma cutter, the power is on, air going through, the fault light on, fuse is good, arc\'s at the gun but will not cut.
—> Purchase or Repair:
—> Purchase or Repair:
Having issues with my L-Tec PCM-32i 680536 unit, used for welding and cutting. Need someone experienced in industrial unit repairs to take a look and fix it
—> Purchase or Repair:
—> Purchase or Repair:
My machine does not work and cannot use L-Tec 810 controller to to do anything.I just get black screen
—> Purchase or Repair:
—> Purchase or Repair:
Unit quit working and I would like to find out if it is worth repairing. I,m retired now and would like to use it once in a while.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have any L-Tec PCM-32i 680536 units available for sale or repair to keep our production running?
—> Purchase or Repair:
—> Purchase or Repair:
My L-Tec Plasma cutter PCM VPI has a short in the circuit board, i can bend it up and it start working fine but I can\'s fine the open circuit or lose wire, Could I sent only the board for repair or is this thing worth repairing, Thanks, Clyde
—> Purchase or Repair:
—> Purchase or Repair:
Hi I have L-Tec 7501 plasma cutter 220 single Ph was pluged into 440 is it repairable Thanks
—> Purchase or Repair:
—> Purchase or Repair:
tendran informacion de diagrama de tarjeta de plasma pcm-750i, numero de parte (8) 38008 ya que lo requiero.porque la estoy reparando favor de mandarme contestacion
—> Purchase or Repair:
—> Purchase or Repair:
my overload light is on everything esle seems to be working what do you think it is and or what can i try
—> Purchase or Repair:
—> Purchase or Repair:
The L-Tec PCM-32i #680536 unit experienced a malfunction today, causing downtime in the Welding & Cutting Systems. The issue occurred around 345 pm during shift. Can you provide insights on what went wrong and how to resolve it quickly before the next shift begins?
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an L-TEC PCM-VPi 31746 welder available for sale to replace the down unit? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
My L-TEC PCM-VPi 31746 welder is not functioning properly. Need a technician to repair it soon.
—> Purchase or Repair:
—> Purchase or Repair:
I have the subject plasma cutter and am trying to use it in a X-Y machine operated by my older computer. It works most of the time but it seems the high frequency start is killing the computer on occasion. Is there a way to disable the hi frequency start circuit ?Thank you Bill—> …Purchase or Repair: 
...
Show More
Show More
The L-Tec PCM-32i 680536 welding system is malfunctioning, causing delays in production. Please send a technician immediately to address the issue and ensure minimal downtime in our operations.
—> Purchase or Repair:
—> Purchase or Repair:
Board is an Esab componet that operates an Esab PCM 750-iplasma cutter. Esab (L-tec) Part # 838008 Rev. C.
—> Purchase or Repair:
—> Purchase or Repair:
I am looking for output diodes for the above unit. The console has a pn of 31746 and SN: a93a 31328.I spoke with Jamie @ esab. They can only come up with the doide \"module\" pn: 951902 and that part is obsolete.This unit has the individual output diodes, I believe two forward and two reverse polari…Purchase or Repair: ...
Show More
Show More
The L-Tec PCM-32i 680536 welding system is experiencing a critical issue on the production line. The system is failing to maintain consistent voltage levels during welding, resulting in frequent interruptions and defects in the welding process. Immediate repair service is required to ensure minimal …Purchase or Repair: 
...
Show More
Show More
I do not have existing Ductling II software. L-Tec 810 screen comes on with white dots filled and no instruction to do anything. Advise 202-438-0224
—> Purchase or Repair:
—> Purchase or Repair:
The L-TEC PCM-VPi 31746 welder is consistently overheating, causing frequent shutdowns and halting our production line. It requires immediate attention and repair to avoid further disruptions.
—> Purchase or Repair:
—> Purchase or Repair:
I have an L-TEC PCM-VPI plasma cutter. It doesn\'t work, I took it to Valley Welders Supply in Billings, they told me that it needs a new circuit board. What would be the cost and/or is it cheaper to buy a new plasma cutter?Kind Regards,Mike
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm interested in purchasing the L-TEC PCM-VPi 31746 welder. Could you please provide information on pricing and availability? I'm trying to source one quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Our L-TEC PCM-VPi 31746 welder is still down. Please provide an update as soon as possible. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hi . Im looking for L-Tec Compact aircut 25 diagram for my Telwin plasmarc 250 (I know its strange but both of units are similar construction)Telwin forgot about this machine - have no diagram they sad its to old ...What is cost of one of parts that L-Tec plasma cutter -I mean HF transformer *electr…Purchase or Repair: ...
Show More
Show More
Please provide information on the L-Tec PCM-32i 680536 welding & cutting system. We are exploring replacement or repair options for this unit and would like to inquire if it is still supported or if parts are available. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, I'm inquiring if the L-TEC PCM-VPi 31746 welder can be repaired or replaced. I'm looking to resolve this issue as soon as possible. Please advise.
—> Purchase or Repair:
—> Purchase or Repair:
Hi, I have a L-TEC brand plasma cutter pcm-7501, p/n 32905, serial a93b41632 and was wondering if I could ask you a question or three about it?My questions are,it will power up fine, and when you select air test, that function works as well. There is no fault light on, but the problem is that the un…Purchase or Repair: ...
Show More
Show More
—> Purchase or Repair: