Leroi Dresser Service & Repair Forum

Please indicate current pricing and availability of P/N 15-1815 Pressure Relief Valve for Lerol Dresser Air Compressor Model 550

— Posted by Barbara Watkins on 2009-01-12

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Leroi Dresser"

If you need your Leroi Dresser unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110

Recent 178 Comments

#Leroi Dresser by Gregory Momyer on 2016-09-11 19:33
Could you copy a manual and specs for a leroi 440A compressor
➡️ Reply
#Leroi Dresser by Greg Chesney on 2011-04-14 01:24
helloIm looking for a service manual for a Le roi dresser air compresser.Modle 1755 DIQ4 cylinder Deutz air cooledIf you could e-mail me back would be well apreciatedthanks
➡️ Reply
#Leroi Dresser by Verlin Schurman on 2010-09-17 19:39
Model Q185DS/N 3449X50L
➡️ Reply
#Leroi Dresser by jill brecke on 2009-12-16 21:47
i am looking for the small piston in the pump, main barring, piston pin and bushing for DRESSOR LE ROI MOTOR 5000-1 S/N 4005X222787Can you help me out? email me or call Chris at 847-778-2787.. thank you.
➡️ Reply
#Leroi Dresser by Roberto G on 2011-11-22 18:35
buen dìa fueran tan amable de enviarme un manual de operacion y de partes de dos compresores marca Leroi.mod: B75 SS A69-694-1mod: 4A219-85-2
➡️ Reply
#Leroi Dresser by Ronald D Elliott on 2010-08-27 12:02
Need the spec. information on the Model 660A compressor
➡️ Reply
#Leroi Dresser by robert waters on 2011-04-06 19:06
my company,home fabric finishing obtained an air compessor,,s/n 4002x181,model 50ss.i have a 480 flex going to a 50 h.p. motor and another flex going to a smaller motor.i didnt take out the unit so im unfamilar as to hook it back up.could use a manual or advice as to power hook up please
➡️ Reply
#Leroi Dresser by Dinesh Kannan on 2010-04-07 06:54
gents,i need to know where the above subjucted parts is availabe for the LE ROIin saudi arabia
➡️ Reply
#Leroi Dresser by Gilbert Hernandez on 2010-09-25 16:47
we have a leroi dressor compressor model #A219-92 and serial #3132x797 build in 1989 with a perkins engine and having trouble building air pressure and dont have manual book on it could you help with this info
➡️ Reply
#Leroi Dresser by Tim Wolfe on 2011-01-14 22:28
Need a manual for this compressor and need to know what size motor should be on it. Thanks
➡️ Reply
#Leroi Dresser by Daniel Ford on 2009-09-03 18:48
need a manual for this compressor. please quote
➡️ Reply
#Leroi Dresser by reza on 2012-08-07 10:17
would you please answered below my question.1.)how con commissioning no-load test compressor type 4E3+BALANCE LINE CE-55985? 2.)during the fist start up when we REACH the speed more thane 37oorpm by turbine drive low speed gear vibration AND tried what is you recommended ? we check alignment everyth…...
Show More
➡️ Reply
#Leroi Dresser by Allister Davis on 2010-02-15 12:03
We have a customer with a Dresser compressor, model # 880A, ser# 4020x402. If this is your model please provide a parts breakdown & advise if you have a distributor in Canada.RegardsAllister
➡️ Reply
#Leroi Dresser by NORM G. BLAIS on 2008-05-12 01:51
I HAVE THIS MODEL WHICH IS IN GOOD CONDITION,BUT BY MOVING IT TO OUR NEW LOCATION THE COPPER LINES LEAVING BOTH HEADS TO THE END COVER AT THE CRANK WERE RIPPED OFF ,SO MUST THEY BE RECONNECTED AND WHAT DO THEY DO AND WERE DO YHEY GO.IS THERE ANY WAY YOU COULD HELP ME BY SENDING ME A MANUAL OR A SHEE…...
Show More
➡️ Reply
#Leroi Dresser by RICKY PESEK on 2008-06-17 07:52
Can anyone please help with instruction book for the above compressor
➡️ Reply
#Leroi Dresser by jordan on 2011-11-28 03:59
I have an older Dresser series 5000 Compressor witha 5hp GE motor on it.I do not have the ability to hook up the 3 phase motor and so am wondering what hp gas engine I would need to power this unit?.Ive seen that it is difficult to find info on this series .It is just for home use and I got it for n…...
Show More
➡️ Reply
#Leroi Dresser by Terry Thompson on 2009-06-08 23:21
Dear Sir,We have the above Air Compressor Model Number-Q1500DC in our possesion and are performing a basic service...I noticed on the coolant manifold a broken coolant temp shutdown sensor...leading to the Positive Air Shutoff Solenoid. Are you able to give me any info on where I can pick up this se…...
Show More
➡️ Reply
#Leroi Dresser by Bradley Martin on 2010-08-18 00:35
We have one of these compressors at the Fort Smith Trolley museum. I need info on the compressor and am also looking for a fuel pump.
➡️ Reply
#Leroi Dresser by reza on 2012-08-07 10:27
would you please send me commissioning manual for reciprocating gas compressor type 4E3+balance line with turbine drive and high speed gear.beast regardsreza ahmadi
➡️ Reply
#Leroi Dresser by Norberto Portillo on 2011-12-12 00:45
I LOOKING FOR LE ROI 550A SERIAL NO 4017X2168 COMPRESSOR OPERATION INSTRUCTION PARTS MANUAL.
➡️ Reply
#Leroi Dresser by Engr, Md.faheem on 2009-01-04 09:39
Dear We have leroi Dresser air compressor in our project. we want local agent in saudi arabia kindly give me address for local agent.Thank You
➡️ Reply
#Leroi Dresser by Roger Graham on 2011-06-30 19:54
I have A Model 660A Ser. #4018x6479 20 HP kohler magnum gas engine. I need to fine info. on unit. Unit is old, but never used. Any info. would be appreicated. Thanks, R Graham
➡️ Reply
#Leroi Dresser by Ronald W. Riggan on 2008-11-20 19:29
I have a cylinder head that needs to be repaired. needs reed valves and a head gasket. Where do I need to send it for an estimate? I need to know ASAP. Thanks Ron.
➡️ Reply
#Leroi Dresser by Lee Burnett on 2010-12-01 14:16
Need upper end rebuild parts Series 800 LeRoi/Dresser air compressor Serial # 458X5251 20 H.P.
➡️ Reply
#Leroi Dresser by Robert Curtis on 2007-01-23 22:31
Hi, I have a Dresser 5000 with serial #. 4005X4959. I have been told the parts I need are obsolete but I can\'t believe know one doesn\'t have them. Anyway the part # I need is H39-4824 and H34-1261. I believe the whole balancer is GH116-320 or 820, if the whole thing is avaliable that way then I wo…...
Show More
➡️ Reply
#Leroi Dresser by Zack Marella on 2012-05-25 16:32
Need specs and or manual for Comp Air 660a ser # 4018x8326Can you help?
➡️ Reply
#Leroi Dresser by john on 2011-06-13 11:08
Model 800 not 8000
➡️ Reply
#Leroi Dresser by jim mauro on 2009-02-21 16:56
if you still are looking for info i have a manual i might be able to copy. i believe i also have the specs for this pump.
➡️ Reply
#Leroi Dresser by Tim Wolfe on 2011-01-14 22:29
Need a manual for this compressor and need to know what size motor should be on it. Serial number 40052X4064 Thanks
➡️ Reply
#Leroi Dresser by Sastro on 2012-07-31 07:39
Dear All,We are planning to buy a brand part LEROI Dresser is able to be helped to his agent,I wait because I really need the information materialDresser LEROI AIR COMPRESSOR SERIES 60 & 66AThanks for the good cooperationregardsSastroCV. Karya MandiriJl. PM Noor Perum Bumi Sempaja Blok AG No.18East …...
Show More
➡️ Reply
#Leroi Dresser by joe on 2012-03-27 16:36
having trouble with compresor over heating past 250 deg. what can i do to correct this
➡️ Reply
#Leroi Dresser by john lowrey on 2017-02-14 16:19
i have a le roi 125. model a219-92 serial 3132x333.it is loading the engine on startup until it shuts itself down.
➡️ Reply
#Leroi Dresser by barry hodge on 2010-02-08 19:56
Can I find manual(s) parts lists based on the following:The only plate on my compressor says:Leroi Dresser air compressor noise compliance with a date codestamped on plate is 2044X30It is a rotory screw oil/air powered by a ford straight 4 gasoline engine what I call a pull behind. No other labels a…...
Show More
➡️ Reply
#Leroi Dresser by Weissiope on 2009-11-15 12:18
I need a elliptical trainer or any other good excercise machine, to use at home. are there any websites where i can purchase this item? so i can train at home. as this is the excellent product to take as it train all the body.
➡️ Reply
#Leroi Dresser by James Geer on 2008-09-19 18:02
I have a dresser series 400 compresser (s)# 453x15390 five hp.it was made in Sidney Ohio.. What I need is aparts list and a co. to by parts from Thank you j geer
➡️ Reply
#Leroi Dresser by Paul Woodworth on 2010-11-13 21:08
Hello sir: I am trying to wire up a 10 hp Leroi comperessor model 660A. I need a wireing deogram for the 3ph pressure unloader switch. Do you wire it to the pressure switch? Drop me a line monday if you can. Also is there a parts book on the compressor . Paul
➡️ Reply
#Leroi Dresser by Jerry Seltz on 2011-01-20 19:48
What is the control voltage for this compressor
➡️ Reply
#Leroi Dresser by Anthony Counts on 2008-04-08 11:43
I have been given a Dresser Series 5000, S/N 4005X22583 compressor (less motor and tank). I am building a compressor unit for running a small sandblaster, but I need to know specifications on the unit above and what HP and RPM motor, as well as the size of the motor pulley (double pulley) I need to …...
Show More
➡️ Reply
#Leroi Dresser by Chris on 2009-02-05 07:54
Can you urgently advice who Leroi Dresser agent in South Africa;ThanksChris
➡️ Reply
#Leroi Dresser by Whitney Teska on 2011-03-07 21:56
Looking for the instillation and service manual if anybody can help me out! Thanks much.
➡️ Reply
#Leroi Dresser by Jody Hotchkiss on 2010-03-02 19:31
I picked up rebuild kit for my 5000 dresser compressure. I was told I\'d needed special tool for removing valves. How much tourk are on these valves? I also need tourk specks on this unit.
➡️ Reply
#Leroi Dresser by BENJAMIN EDEN on 2013-04-24 18:17
inquiry about Model series 400 - 400A rerpair parts availability, LEROI DRESSER
➡️ Reply
#Leroi Dresser by Farraj on 2006-02-26 07:43
Dear sir :We have a Leroi Dresser air compressor in our projcet . We want to know the agent for this type of compressors in Saudi Arabia .FarrajSincerely
➡️ Reply
#Leroi Dresser by Joe on 2010-03-14 19:09
hi i have a 1600 comp,when i load it up it sometimes goes and sometims not,its like the engine isnt picking up the rpms,it will idle at 1300rps sometimes but it seems to just want to kill the engine.it has a cat engine,i even hot wired the fuel shut off just incase that was the problem,i know it is …...
Show More
➡️ Reply
#Leroi Dresser by David Blackwell on 2011-10-09 02:28
I have a 1988 Leroi Serial # 3120x112Model # A219-89 I have a question?If your compressor is low on oil will that preventit from starting. The fuel is not getting to the injectorsthe fuel filter is full but its not getting to the motor.What could the problem be. Can u help me. Thanks Dave.
➡️ Reply
#Leroi Dresser by john holm on 2008-08-19 23:15
just aquired 2 a219-180-g17 electric air compressors and would like to find some manuals etc. Also they dont have sound enclosures and i would like to purchase some or build a quiet mechanical room to place units in along with a r800a pioneer refridgerated dryer. Any suggestions more than welcomed. …...
Show More
➡️ Reply
#Leroi Dresser by steve on 2010-07-28 20:14
I am looking for the Model 20-25-30SS II Installation-Operation, Maintenance and Service Manual
➡️ Reply
#Leroi Dresser by Thomas Belesky on 2010-11-05 21:08
I am looking for the specifications of what appears to be a LeROI Dresser Rotary Screw Pump. The housing has the following stampings:Mfg: A219-84-3Serial No: 4154X110The best information I have been able to find is the original vendor was Gardner Denver but teh actual Rotary Screw Pump OEM is LeRoi …...
Show More
➡️ Reply
#Leroi Dresser by Ivan Perez on 2009-09-28 17:58
I got a compressor leroi.Model 4A219-84-3Serial 4151X171And i need all manuals, Parts and operation.Tanks.
➡️ Reply
#Leroi Dresser by Thomas Dameron on 2010-12-10 22:36
Dear Sirs:How may I receive a service manual for a LeRoi Dresser Air Compressor Model # A219-132-4 Serial # 3174x29Thank you,Thomas Dameron
➡️ Reply

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.