Leroi Dresser Service & Repair Forum

I picked up rebuild kit for my 5000 dresser compressure. I was told I\'d needed special tool for removing valves. How much tourk are on these valves? I also need tourk specks on this unit.

— Posted by Jody Hotchkiss on 2010-03-02

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Leroi Dresser"

If you need your Leroi Dresser unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110

Recent 178 Comments

#Leroi Dresser by Engr, Md.faheem on 2009-01-04 09:39
Dear We have leroi Dresser air compressor in our project. we want local agent in saudi arabia kindly give me address for local agent.Thank You
➡️ Reply
#Leroi Dresser by Christopher Langan on 2010-09-19 08:17
I am looking for a service & parts manual for a Le Roi 256 SDS Air Compressorwhat is the CFM & max pressure ?Model 256SDS SN 462X1421
➡️ Reply
#Leroi Dresser by CHRIS on 2009-12-02 12:58
i need the main barring . piston pin and bushing for the small piston in the pump. can you help me out?thanks chris847-778-2787
➡️ Reply
#Leroi Dresser by NESTOR VERGANI on 2009-06-30 22:51
WE NEED AS SOOM AS POSIBILITY THE FOLOWIN PARTS.FOR THE UNIT LERIO 1600 , MODEL A219-148-3, SERIAL 3165X95COUPLING (1 )BEARING 7313 BE.GAP (2)BEARING 7214 BUO ( 3 )GEAR P.O.P. 036.45.0 (1)GEAR P-O-P- 036.45.1 P/N 26944-2 (1)
➡️ Reply
#Leroi Dresser by Joe on 2010-03-14 19:09
hi i have a 1600 comp,when i load it up it sometimes goes and sometims not,its like the engine isnt picking up the rpms,it will idle at 1300rps sometimes but it seems to just want to kill the engine.it has a cat engine,i even hot wired the fuel shut off just incase that was the problem,i know it is …...
Show More
➡️ Reply
#Leroi Dresser by Terry Tuckwood on 2013-11-23 20:24
I have a 125 compressor series Q125GH-H and would like to get a parts and service manual for the product. Serial # 2205X18 Mfg. date is 1990
➡️ Reply
#Leroi Dresser by Luis Fernando Santana on 2012-10-15 18:50
Good afternoon i need the manual for my compressor leroi CL30 CUB because i need to replace some parts.If you can sale the manual i appreciate that.Thanks.
➡️ Reply
#Leroi Dresser by michael dixon on 2011-09-01 10:24
Hello, I am looking for a repair manual for a leroi 185 compressor
➡️ Reply
#Leroi Dresser by Al on 2012-02-16 16:31
Have a 515-0192 for sale. $400 Can send pics if interested.
➡️ Reply
#Leroi Dresser by NORM G. BLAIS on 2008-05-12 01:51
I HAVE THIS MODEL WHICH IS IN GOOD CONDITION,BUT BY MOVING IT TO OUR NEW LOCATION THE COPPER LINES LEAVING BOTH HEADS TO THE END COVER AT THE CRANK WERE RIPPED OFF ,SO MUST THEY BE RECONNECTED AND WHAT DO THEY DO AND WERE DO YHEY GO.IS THERE ANY WAY YOU COULD HELP ME BY SENDING ME A MANUAL OR A SHEE…...
Show More
➡️ Reply
#Leroi Dresser by Verlin Schurman on 2010-09-17 19:39
Model Q185DS/N 3449X50L
➡️ Reply
#Leroi Dresser by ahmida on 2010-02-15 13:06
voir partie compression
➡️ Reply
#Leroi Dresser by jordan on 2011-11-28 03:59
I have an older Dresser series 5000 Compressor witha 5hp GE motor on it.I do not have the ability to hook up the 3 phase motor and so am wondering what hp gas engine I would need to power this unit?.Ive seen that it is difficult to find info on this series .It is just for home use and I got it for n…...
Show More
➡️ Reply
#Leroi Dresser by Henning Small on 2009-02-05 08:13
HI I am looking for service kits for the above machines and cant find some one here to assist, Can u please help.Regards
➡️ Reply
#Leroi Dresser by Mr. Mya Than Soe on 2008-10-29 03:45
Dear Sir,Have a nice day!I am Mr. Mya Than Soe, Senior Manager fo WIN ENGINEERING CO., LTD. We WIN ENGINEERING is major trading in Myanmar.I would like to request the quotaiton for Dressor Leroi Air Compressor under mentioned.Dressor Leroi Air Compressor UnitModel – 880 ABare Pump (Without Motor and…...
Show More
➡️ Reply
#Leroi Dresser by Tim Wolfe on 2011-01-14 22:29
Need a manual for this compressor and need to know what size motor should be on it. Serial number 40052X4064 Thanks
➡️ Reply
#Leroi Dresser by Anthony Counts on 2008-04-08 11:43
I have been given a Dresser Series 5000, S/N 4005X22583 compressor (less motor and tank). I am building a compressor unit for running a small sandblaster, but I need to know specifications on the unit above and what HP and RPM motor, as well as the size of the motor pulley (double pulley) I need to …...
Show More
➡️ Reply
#Leroi Dresser by mike griffin on 2009-01-02 02:44
could i buy the manuals for a 1984 185cfm leroi compressor it has a perkins deisel .thanks mike griffin
➡️ Reply
#Leroi Dresser by abrahim on 2008-08-15 10:37
im looking for air compressor 440A.we have this model in our plant aan we need to buy new one.wuold you help please
➡️ Reply
#Leroi Dresser by steve on 2007-03-20 15:01
I was wondering if you could track down an owners manual for a leroi air compressor # 20 sst, pump # a219-79. My boss has one with hardly any hours on it has been setting for a while. If you can help please mail me back. thank you steve
➡️ Reply
#Leroi Dresser by David Blackwell on 2011-10-09 02:28
I have a 1988 Leroi Serial # 3120x112Model # A219-89 I have a question?If your compressor is low on oil will that preventit from starting. The fuel is not getting to the injectorsthe fuel filter is full but its not getting to the motor.What could the problem be. Can u help me. Thanks Dave.
➡️ Reply
#Leroi Dresser by Gilbert Hernandez on 2010-09-25 16:47
we have a leroi dressor compressor model #A219-92 and serial #3132x797 build in 1989 with a perkins engine and having trouble building air pressure and dont have manual book on it could you help with this info
➡️ Reply
#Leroi Dresser by barry hodge on 2010-02-08 19:56
Can I find manual(s) parts lists based on the following:The only plate on my compressor says:Leroi Dresser air compressor noise compliance with a date codestamped on plate is 2044X30It is a rotory screw oil/air powered by a ford straight 4 gasoline engine what I call a pull behind. No other labels a…...
Show More
➡️ Reply
#Leroi Dresser by Ed Jones on 2009-12-14 16:33
I need parts for a Le Rol Compresser Moden A219-120 Serial 3112x716 and a book
➡️ Reply
#Leroi Dresser by Dagoberto Lastra on 2008-09-03 01:50
Im looking for a part that goes to a Leroi Dresser air compressor. Sorry but i don\'t know the name of the part its made of rubber and has the letters on it \" ROUSA Flex\" \" ACT 3 W\" \" REICH \" its the part that conects with the motor that turns the air compresor. The Model # on the air compress…...
Show More
➡️ Reply
#Leroi Dresser by Jake McMasters on 2012-01-16 21:27
i have a compresser that is mixing oil with the air i need a break down so i can figure out the problem or if you can just tell me what might my problem could be thanks
➡️ Reply
#Leroi Dresser by Ronald W. Riggan on 2008-11-20 19:29
I have a cylinder head that needs to be repaired. needs reed valves and a head gasket. Where do I need to send it for an estimate? I need to know ASAP. Thanks Ron.
➡️ Reply
#Leroi Dresser by Brad Milmine on 2013-01-29 16:34
I have a 5 hp. electric Dresser compressor and the centrifugal unloader is not operating. Is there an adjustment for this system. Any help with this would be appreciated. Thanks Brad
➡️ Reply
#Leroi Dresser by Chuck Bozas on 2008-04-01 00:56
I was looking for a rebuild kit for a Dresser Model 500 Air Compressor. It is from the early 1970\'s and has 5hp motor w/ 120-150 gallon tank. Please let me know if you can be of any further assistance. Chuck BozasParts SalesThe Craun-Liebing Company
➡️ Reply
#Leroi Dresser by BEENA on 2008-06-05 16:51
hello, could you please tell me the cfm for a leroi dresser compressor;series:A219-107; s/n 4141X1153. thanks in advance for your co-operation!
➡️ Reply
#Leroi Dresser by Rajagopal Mahesh on 2010-02-16 13:51
Dear Sir,i am R.MAHESH,from CAEL,Doha,Qatar. i wants to do the 6 number of BOG compressor has to do the alignments and tuning at RASGAS,Qatar.Whom i will contact?pls let me know? i need your kind advise.i hopw that you may consider my request and do the needful,thanks & regardsRajagopal MaheshSr.Pro…...
Show More
➡️ Reply
#Leroi Dresser by luis f paredes on 2011-05-05 18:31
i am looking for the wiring diagram for my DOERR LR-13758 2hp motor model 90450-D XD. i need to convert it to 3 phase if you can please help ....... Thank You Luis Paredes cell (626) 373-6890
➡️ Reply
#Leroi Dresser by Israel Hernandez on 2008-10-25 14:33
We are looking a spare list parts for portable LeRoi air compressor 1750, we need a diaphragm of the inlet valve
➡️ Reply
#Leroi Dresser by kip netser on 2010-03-09 15:09
i need flexable member, coupler for this unit
➡️ Reply
#Leroi Dresser by Verlin Schurman on 2010-09-17 19:43
Model Q185DS/N 3449X50LLe ROI air compressor
➡️ Reply
#Leroi Dresser by Doug Shaw on 2010-02-03 20:43
I have inhereited a Leroi Dresser Air Compressor. I\'m looking for the specs on this air compressor.Thank you.
➡️ Reply
#Leroi Dresser by Ing Francisco Montero Gutierrez on 2011-09-01 17:07
We want to know if we can convert a leroi rotary compressor mod 20-25-30 SS to a vacuum rotary screw and what it needs to convert ,what does it takes and how much it costs to convert if its posible ,thanks in advance for your precious help. greetings from Mexico .
➡️ Reply
#Leroi Dresser by Joseph Cruz on 2009-07-15 19:16
The Air compressor is a Leroi international, IncModel #: WE100SSIIAHS/N: 4227X625PSI: 125
➡️ Reply
#Leroi Dresser by Brett Nelson on 2010-10-17 19:23
have a model 75 RGI and have the 4 cyl fordwater in the oil now and it smokes been tryin to get it put back to working order for just blowing out sprinkling systems seems to be a money pit no one knows or has heard anything about this model please help.
➡️ Reply
#Leroi Dresser by Bob on 2008-05-31 15:19
I have a complete series 5000 minus the tank. It it mounted with a 10hp Kohler engine. What is the output of this compressor? I cannot seem to find any information on it via the web.Thanks!
➡️ Reply
#Leroi Dresser by Al on 2008-09-14 22:51
2a116-407 Suction Valve assembly Leroi Model W40-50SS. This is the same Valve on W40
➡️ Reply
#Leroi Dresser by Cahyono E. P on 2012-11-02 05:46
hi there,I need the information for the capacity (cfm) of air compressor Leroi Dresser series 660A. Also the maximum vacuum of this unit.Thank you & regards,
➡️ Reply
#Leroi Dresser by Dinesh Kannan on 2010-04-07 06:54
gents,i need to know where the above subjucted parts is availabe for the LE ROIin saudi arabia
➡️ Reply
#Leroi Dresser by Bob Hollingsworth on 2020-02-19 02:55
need a fiber coupler disk for my 175 SDE compressor with the deutz diesel engine or a book with the part numberThanks
➡️ Reply
#Leroi Dresser by BENJAMIN EDEN on 2013-04-24 18:17
inquiry about Model series 400 - 400A rerpair parts availability, LEROI DRESSER
➡️ Reply
#Leroi Dresser by Allister Davis on 2010-02-15 12:03
We have a customer with a Dresser compressor, model # 880A, ser# 4020x402. If this is your model please provide a parts breakdown & advise if you have a distributor in Canada.RegardsAllister
➡️ Reply
#Leroi Dresser by Tim Wolfe on 2011-01-14 22:28
Need a manual for this compressor and need to know what size motor should be on it. Thanks
➡️ Reply
#Leroi Dresser by Jim on 2012-10-14 21:04
Looking for a parts breakdown and/or service manual for a LeROI DRESSER Series 350K rotary air cooled electric compressor.
➡️ Reply
#Leroi Dresser by Scott Wilson on 2008-11-15 03:04
I need a complete copy of the service manual and parts manual for thiscompressor. (I believe it was manufactured in 1982.)
➡️ Reply
#Leroi Dresser by Gustavo Silva on 2008-09-09 15:59
We need information about serie 100, serial. 459X10722, Leroi Dresser air compressor
➡️ Reply

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.