NSK Service & Repair Forum

NSK ESA-B014CF3-11 servo drive not responding. Production halted. Need immediate assistance to troubleshoot and repair.

β€”> Purchase or Repair: Ticket Image

β€” Posted by edward on 2024-11-06

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "NSK"

If you need your NSK unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 96 Comments

#NSK by Gilberto Saraiva on 2008-03-14 00:18
Good Morning:I need the manual of servo drive EM0608A05-05 NSK. Could you help-me please?.Thanks a lot

β€”> Purchase or Repair:
#NSK by dao on 2023-09-30 00:00
The Nsk esa-j1003af2-11 ESA Servo Drive is malfunctioning, causing a production line downtime. Urgent repair is needed to restore operations

β€”> Purchase or Repair:
#NSK by yasser on 2009-12-05 13:34
good evening .i hope all stuff ok. plz i have proplem, in my netestal machine about robot moving hand .this problem come from servo drive give me error f4 and i read in book its friom emergency switch but i check all emergency ok. i try another drive it work and give letter C but problem difference …Purchase or Repair: Ticket Image...
Show More
#NSK by edward on 2024-11-06 00:00
NSK ESA-B014CF3-11 servo drive not responding. Production halted. Need immediate assistance to troubleshoot and repair.

β€”> Purchase or Repair:
#NSK by Schwaertzel on 2014-04-14 20:32
NSK ESA 4-65006-700 drive is malfunctioning, halting the production line. Urgent repair service needed to fix the issue immediately.

β€”> Purchase or Repair:
#NSK by Elkowich on 2014-02-13 04:58
The NSK ESA 4-65006-700 Drive unit is currently not functioning. Please investigate and provide a status update. Thank you.

β€”> Purchase or Repair:
#NSK by Leo Solomon on 2016-11-15 09:13
Gud DayThe NSK ESA-Y2003A23-21 driver that we have is having a big trouble on its communication , it wont make the motor to initialize, it only goes on one side of initialization and does not goes to its original position, but when we try to manually rotate it using handy controller configuration, i…Purchase or Repair: Ticket Image...
Show More
#NSK by Tom on 2007-03-03 02:20
Can you repair a ESLZ10CF1-01 drive and what is the turn around time? We have been sending these to another repair facility but we get about 20% of them back saying unable to repair. Can you help us ?ThanksTom

β€”> Purchase or Repair:
#NSK by Eric Ronnebaum on 2015-10-28 15:15
Dear sales I need a repair on a nsk RW1410FN523 motor. My customer is stating it making loader then normal noises and it harder to rotated by hand. The NSK amplifier is M-EP1410A15-05We would like to have a estimate if possible to go through it. I don\'t know if this is possible without looking at t…Purchase or Repair: Ticket Image...
Show More
#NSK by mdali on 2014-12-25 07:44
Hello, I am inquiring about part number NSK ESA 4-34018-700 described as a drive. My client is experiencing an issue with it. Can you please provide information on how we can proceed with repair or troubleshooting? Thank you.

β€”> Purchase or Repair:
#NSK by TOMAS MARIN on 2010-07-02 23:25
I GOT A PROBLEM BUT I DONT KNOW WHERE COULD BE IF IN MOTOR OR IN DRIVE MY DRIVE IS AN NSK ESA Y3040TF120 AND THE MOTOR THE FAULT ON THE DRIVE IS F-1 AND A- 4 AND THE MAIN PROBLEM IS ON THE TOURRET INDEXING SO I CAN NOT SEE ON DYSPLAY THE NUMBER OF THE TOOL

β€”> Purchase or Repair:
#NSK by Tafheem on 2013-04-30 00:00
NSK ESA-Y3008A25-21 power supply unit is not turning on despite being plugged in. Need immediate repair assistance.

β€”> Purchase or Repair:
#NSK by KUMARADEVAN SANTANADEWAN on 2009-06-08 10:55
I have one unit of NSK motor controller model NSK AMD EXC3 for repair.I would like to have advice, the frequent faulty of this module during production. Most of the fauly is burn IC of M1050 at Y and X- axis motor. Pls advice!

β€”> Purchase or Repair:
#NSK by Kohlbrenner Chris on 2008-02-11 08:31
Hello, we have a Problem with an NSK \"ESA Y2020 TF6-20\", No: 2-05407-700. It shows \"F 4\" on the Display and we don\'t know, what that means. Please send us an Answer as soon as possible.Please send us also a list of every possible Alarm, which could be shown on the Display.The Adress is above, p…Purchase or Repair: Ticket Image...
Show More
#NSK by RAFAEL LOYA on 2008-08-03 19:35
I HAVE A PROBLEM WHIT A SERVO DRIVE AMP ESA_Y3040T25-21, I NEED A CATALOG OF ITEM PLEASE THANKS ALL

β€”> Purchase or Repair:
#NSK by Alex Cheong on 2012-02-17 04:24
Dear Sir,We are trading company located in Malaysia looking for the possibility to repairing several type of OEM NSK DD motor and Driver as below,DD Motor type,1) M-JSB015FA503DD motor Drivers,2) M-ESA-D017-CF13) ESA-JB015CF3-204) M-EDC-PS3015CB5F5-01Kindly advise the possibility, prices, lead time,…Purchase or Repair: Ticket Image...
Show More
#NSK by Andy on 2012-11-29 23:34
I can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive? Thanks for any Ideas. Andy

β€”> Purchase or Repair:
#NSK by Peter Hamvai on 2009-05-11 13:34
Dear repair center,I\'m searching for a used(repaired) NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!If you haven\'t from this modul, please let me know around what is the repairing time with delivery if the wrong one is on Hungary now?!kind regardsPeter Hamvaiβ€”> …Purchase or Repair: Ticket Image...
Show More
#NSK by ZIJLMANS on 2014-05-01 17:20
The NSK ESA 4-34018-700 drive is displaying Error Code E567. Equipment is not responding and motor is making a loud grinding noise. Urgent issue, please advise on next steps.

β€”> Purchase or Repair:
#NSK by Sergio Rodriguez on 2012-06-14 22:38
NSK Servo Drive Repair Model: EM1010A15-05 We have a NSK Servo Drive in bad conditions, when we turn on the machine light leds.I appreciate your comments, in case that you can to repair my servo drive.Best Regards Sergio Rodriguez Plant chiefProduction DepartmentAv. Los pinos #7 A Col. Los pinosGuad…Purchase or Repair: Ticket Image...
Show More
#NSK by Olaf Rekman on 2010-03-24 16:51
Dear sir,I am looking for a new or rebuilded NSK driver TYPE EMB014AF-2-05Please let me know.Regards - Olaf

β€”> Purchase or Repair:
#NSK by Moises Tovar on 2008-07-09 14:51
I need a NSK driver part no. EE0608A05-25 SERIE. 065221

β€”> Purchase or Repair:
#NSK by Hans van der Hoorn on 2025-06-01 18:27
The NSK EM1010A15-05 drive unit is not working. Please check and repair.

β€”> Purchase or Repair:
#NSK by Doreen Rogers on 2010-11-18 18:01
Hello, I am looking for the following bearing for NSK RW1410FN523 servo motor.The part number is 150DXR007DD / NRXT15025 C8P5 sealed bearing outer race / inner race Is this something you may have available for sale ?

β€”> Purchase or Repair:
#NSK by karim on 2006-03-06 00:00
NSK 4083141 showing no power or response when turned on. Need immediate repair service to diagnose and fix issue.

β€”> Purchase or Repair:
#NSK by mansuk hong on 2008-04-09 05:20
I\'d like to get a manual for nsk that is ESB014CFI-01A.I\'VE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY I\'M NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

β€”> Purchase or Repair:
#NSK by Scott Boynton on 2008-04-14 22:16
Hello, I have a NSK ESA Y2020 drive that appears a blown optoisolator on the quadrature encoder output. The A, B, B*, Z and Z* channels work normaly, with a zero to five volt throw, but the A* channel only has about a half volt thow. Of course this is preventing it from working properly. Can you off…Purchase or Repair: Ticket Image...
Show More
#NSK by James Park on 2010-10-20 00:24
Hello,We have a upper and lower driver we need to get repaired. The type is ESA-B014CFC-21 and the NO. is B-13004-700. They both are not accurate so we were wondering if we can send them to you guys and have the calibrated. Please give me a call back or shoot me an email and hopefully we can figure …Purchase or Repair: Ticket Image...
Show More
#NSK by elyamini on 2014-12-22 20:44
Hello, I am interested in purchasing the NSK ESA 4-65006-700 Drive unit. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

β€”> Purchase or Repair:
#NSK by azadeh on 2014-05-01 22:20
Hello, our NSK ESA 4-65006-700 drive is down with error code E302. Urgent assistance needed to troubleshoot and resolve the issue. Thank you.

β€”> Purchase or Repair:
#NSK by Kevin Lim on 2011-05-24 01:23
My Scanray X-ray systems having the problem to activite X-ray operation, every time I\'m switched on the X-ray operation and it turn down immediately, and the control panel can not adjust the Ma setting. it is always fixed at 2Ma.

β€”> Purchase or Repair:
#NSK by Mrs Mohan on 2007-05-24 13:41
The above mentioned drive needs repair.

β€”> Purchase or Repair:
#NSK by BIOTECH on 2014-12-03 23:23
Can this NSK ESA 4-65006-700 Drive be repaired or bought? I am looking to check this off my to-do list.

β€”> Purchase or Repair:
#NSK by Moises Tovar on 2009-06-03 21:56
I need a Nsk driverEE0608A05-24.2 or substituteThank you

β€”> Purchase or Repair:
#NSK by Maher Amara on 2011-11-16 11:48
If it\'s possible to repqir the SERVO DRIVE NSK type EMOAOBK13-05SPR-T4/Z-NS

β€”> Purchase or Repair:
#NSK by marjan cresnar on 2008-04-08 06:53
we have a problem whit NSK servo drive Type ESA-Y2020T23-11Nr. Z-85192 -700Fault on electronic plate NSK Eo43SACB1-001Pleace give as offer for repaire or a new one.Best RegardsMarjan

β€”> Purchase or Repair:
#NSK by Chansac on 2014-02-13 07:58
NSK ESA 4-34018-700 is showing error code E403 and not responding. Need urgent assistance to troubleshoot and restore operation.

β€”> Purchase or Repair:
#NSK by MARTIN Michel on 2007-04-17 16:22
Hello ,we need repair some parts NSK servodrive or servo motor .have you an office or desk manager in france ?best regards Mr MARTIN Michel

β€”> Purchase or Repair:
#NSK by Henri on 2014-01-05 10:53
Hello, I'm in the purchasing department and a colleague needs a replacement for an NSK ESA 4-65006-700 Drive. We can't locate one. Could you provide repair information? Thanks!

β€”> Purchase or Repair:
#NSK by Al Urbonas on 2025-05-22 08:40
The NSK ESB014CF1-01A is not functioning properly. Please check and repair as needed. Thank you.

β€”> Purchase or Repair:
#NSK by George Morrow on 2025-05-30 06:07
I'm interested in purchasing an NSK B014CF7-02 Servo Drive. Do you have one available for sale or repair?

β€”> Purchase or Repair:
#NSK by Alain David on 2014-01-17 15:55
I am a business customer inquiring about repair service for my NSK FMDI 01 MDI Pendant. The unit is not turning on at all, despite multiple attempts to power it up. I have checked the power source and cables, and they seem to be in proper working condition. The estimated replacement cost for a new N…Purchase or Repair: Ticket Image...
Show More
#NSK by BesterPreisvergleich on 2011-12-04 10:31
Hallo, ich habe eine tolle Seite entdeckt,bei der man einfach den billigsten Preis fΓΌr allerlei Dinge suchen kann. Hier ist der link Bester Preisvergleich Ach ja, ausserdem findet man dort jede Menge Gutscheine, was natΓΌrlich toll ist!.

β€”> Purchase or Repair:
#NSK by Alexander Zitnicky on 2014-12-19 22:44
The NSK ESA 4-65006-700 drive unit malfunctioned earlier today during the morning shift, leading to unexpected downtime. Can you provide a quick update on the issue before the next shift begins? Thank you.

β€”> Purchase or Repair:
#NSK by Victor sciarrillo( delta steel) on 2012-01-23 16:36
We have a couple machines that use NSK drivesType:EM1010A15-05No. 103554-591The machine manufacturer said they are obsolete and can\'t sell us one. We willbuy new or rebuilt if you have either.

β€”> Purchase or Repair:
#NSK by thiagu on 2008-02-27 03:35
hi, im looking for nsk controller which the model no is EM0608A15-05. I aloso got 1 faulty controller need to be repair. pls send me the quotation togather with trasportation.

β€”> Purchase or Repair:
#NSK by Singletary on 2014-12-05 00:23
Do you have an NSK ESA 4-65006-700 drive available for sale or repair? Need it urgently to keep production running smoothly. Thank you.

β€”> Purchase or Repair:
#NSK by Des on 2014-05-03 07:20
Hello, I am interested in purchasing the NSK ESA 4-34018-700 Drive. I am looking to source one quickly and wanted to inquire about pricing and availability. Thank you!

β€”> Purchase or Repair:
#NSK by Curtis Indy on 2011-01-31 14:34
We are running an NSK ESA-Y2020A25-21 drive. On startup it displays an error code of E0A4. What is this error and is it a repair situation?

β€”> Purchase or Repair:
#NSK by Cacho on 2014-09-07 17:20
Hello, we are in urgent need of repair info for our NSK ESA 4-65006-700 Drive. Can you please provide guidance on how we can proceed with fixing this issue? Thank you.

β€”> Purchase or Repair:

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.