Troubleshooting NSK: Common problems and repair info

NSK for Service call 1-336-969-0110 at Industrial Electronics Repair

NSK Service & Repair Forum

NSK Servo Drive Repair Model: EM1010A15-05 We have a NSK Servo Drive in bad conditions, when we turn on the machine light leds.I appreciate your comments, in case that you can to repair my servo drive.Best Regards Sergio Rodriguez Plant chiefProduction DepartmentAv. Los pinos #7 A Col. Los pinosGuadalajara, Jalisco, México.www.damy.com

—> Purchase or Repair:

— Posted by Sergio Rodriguez on 2012-06-14

Reply🗨️Ask a New Question Below❓

Recent 96 Comments

#NSK by thiagu on 2008-02-27 03:35

hi, im looking for nsk controller which the model no is EM0608A15-05. I aloso got 1 faulty controller need to be repair. pls send me the quotation togather with trasportation.

—> Purchase or Repair:

➡️ Reply

#NSK by Mark Proctor on 2007-04-03 10:08

NSK ES3040K23-03 Servo DriveHi, We have an NSK ES3040K23-03 servo drive that requires repair.Do you have a fixed price repair on this unit?Please advise as soon as possible.ThanksMark Proctor

—> Purchase or Repair:

➡️ Reply

#NSK by Maher Amara on 2011-11-16 11:48

If it\'s possible to repqir the SERVO DRIVE NSK type EMOAOBK13-05SPR-T4/Z-NS

—> Purchase or Repair:

➡️ Reply

#NSK by Vacev on 2014-12-27 00:06

Could you please provide me with information on pricing and availability for the NSK ESA 4-65006-700 Drive? I am interested in sourcing one quickly. Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Scott Boynton on 2008-04-14 22:16

Hello, I have a NSK ESA Y2020 drive that appears a blown optoisolator on the quadrature encoder output. The A, B, B*, Z and Z* channels work normaly, with a zero to five volt throw, but the A* channel only has about a half volt thow. Of course this is preventing it from working properly. Can you off…Purchase or Repair:

➡️ Reply

#NSK by Chester Yong on 2010-08-12 09:15

dear sir,I would to check that do you able to repair this NSK driver model: ESA 23?

—> Purchase or Repair:

➡️ Reply

#NSK by Olaf Rekman on 2010-03-24 16:51

Dear sir,I am looking for a new or rebuilded NSK driver TYPE EMB014AF-2-05Please let me know.Regards - Olaf

—> Purchase or Repair:

➡️ Reply

#NSK by Des on 2014-05-03 07:20

Hello, I am interested in purchasing the NSK ESA 4-34018-700 Drive. I am looking to source one quickly and wanted to inquire about pricing and availability. Thank you!

—> Purchase or Repair:

➡️ Reply

#NSK by Hans van der Hoorn on 2025-06-01 18:27

The NSK EM1010A15-05 drive unit is not working. Please check and repair.

—> Purchase or Repair:

➡️ Reply

#NSK by MARTIN Michel on 2007-04-17 16:22

Hello ,we need repair some parts NSK servodrive or servo motor .have you an office or desk manager in france ?best regards Mr MARTIN Michel

—> Purchase or Repair:

➡️ Reply

#NSK by brecea on 2014-02-10 21:04

Could you please provide repair information for NSK ESA 4-34018-700 Drive? It's urgent, and we're on-site trying to get it fixed quickly. Thank you!

—> Purchase or Repair:

➡️ Reply

#NSK by Francesco Baldassa on 2010-09-17 09:10

Hello ,we need repair some parts NSK servodrive have you an office or desk manager in italy ?best regards Mr Francesco Baldassa

—> Purchase or Repair:

➡️ Reply

#NSK by DAVID CONTRERAS on 2014-12-06 06:23

The NSK ESA 4-34018-700 drive unit isn't working.

—> Purchase or Repair:

➡️ Reply

#NSK by Khoa on 2014-01-07 06:22

The NSK ESA 4-34018-700 is a drive unit that is currently not working. The maintenance team needs assistance in resolving the issue.

—> Purchase or Repair:

➡️ Reply

#NSK by MARIO BALANDRAN on 2013-02-06 23:44

we are look9ing for KSK drive EE1010A98-25

—> Purchase or Repair:

➡️ Reply

#NSK by Mfg on 2014-12-26 03:06

Could you please confirm if the NSK ESA 4-34018-700 is still supported or if replacement parts are available for this drive unit? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Volker Schmidt on 2009-01-07 10:26

We hava some drivers with the PN ESA-BO14CFD-21 or ESA-BO14CF3-11I can communicate over hyper terminal but not all command work, TS, TC, IO0/RB but some commands do not work like TT, MN.Do you have any idear?Thanks for help Volker

—> Purchase or Repair:

➡️ Reply

#NSK by Jesus Escobedo on 2009-10-02 17:52

We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,Jesús EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuada…Purchase or Repair:

➡️ Reply

#NSK by Andy on 2012-11-29 23:34

I can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive? Thanks for any Ideas. Andy

—> Purchase or Repair:

➡️ Reply

#NSK by Navjot Singh on 2007-09-24 11:06

plz email the detail Manual and Software for NSK Servo ESA B045Af3-21 . with Regard Navjot Singh

—> Purchase or Repair:

➡️ Reply

#NSK by Animesh on 2008-09-25 15:52

I have got a problem that the servo motor is getting fault.How could I repair when I get P1,P2 such kind of warning.

—> Purchase or Repair:

➡️ Reply

#NSK by Mcguinness on 2014-12-23 15:06

Please provide me with detailed information about the NSK ESA 4-34018-700 Drive. We are looking into the possibility of finding replacement parts or repair options for this unit. Could you please confirm if it is still supported or if any parts are available for it? Thank you. —> …Purchase or Repair:

➡️ Reply

#NSK by suresh on 2009-02-16 17:39

we bought RF TX and RX encoder decoder kits from nsk electronics.but when we use our modules there is no output.if we come to u whether u test it

—> Purchase or Repair:

➡️ Reply

#NSK by Tafheem on 2013-04-30 00:00

NSK ESA-Y3008A25-21 power supply unit is not turning on despite being plugged in. Need immediate repair assistance.

—> Purchase or Repair:

➡️ Reply

#NSK by Chansac on 2014-02-13 07:58

NSK ESA 4-34018-700 is showing error code E403 and not responding. Need urgent assistance to troubleshoot and restore operation.

—> Purchase or Repair:

➡️ Reply

#NSK by Pelc on 2014-12-28 15:06

Hello, I'm reaching out on behalf of a client who has an NSK ESA 4-65006-700 Drive that needs repair. Can you please provide information on how we can proceed with the repair process and obtain a quote? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Sergio Rodriguez on 2012-06-14 22:38

NSK Servo Drive Repair Model: EM1010A15-05 We have a NSK Servo Drive in bad conditions, when we turn on the machine light leds.I appreciate your comments, in case that you can to repair my servo drive.Best Regards Sergio Rodriguez Plant chiefProduction DepartmentAv. Los pinos #7 A Col. Los pinosGuad…Purchase or Repair:

➡️ Reply

#NSK by NormanLew on 2022-03-02 05:25

Hello. And Bye.

—> Purchase or Repair:

➡️ Reply

#NSK by Tom on 2007-03-03 02:20

Can you repair a ESLZ10CF1-01 drive and what is the turn around time? We have been sending these to another repair facility but we get about 20% of them back saying unable to repair. Can you help us ?ThanksTom

—> Purchase or Repair:

➡️ Reply

#NSK by Jim Bianchi on 2014-12-29 13:54

I am following up on the previous message regarding the NSK ESA 4-65006-700 Drive unit. The unit is still down. Please ensure someone gets back to me

—> Purchase or Repair:

➡️ Reply

#NSK by yasser on 2009-12-05 13:34

good evening .i hope all stuff ok. plz i have proplem, in my netestal machine about robot moving hand .this problem come from servo drive give me error f4 and i read in book its friom emergency switch but i check all emergency ok. i try another drive it work and give letter C but problem difference …Purchase or Repair:

➡️ Reply

#NSK by Chitfreerve on 2014-10-31 22:57

The NSK ESA 4-65006-700 drive unit experienced a malfunction earlier today, causing downtime from 130 PM to 300 PM. We need to address this issue

—> Purchase or Repair:

➡️ Reply

#NSK by Eric Enloe on 2014-02-14 11:58

Hello, I'm reaching out on behalf of a client who needs assistance with an NSK ESA 4-65006-700 drive. Can you please provide information on repair services available for this part? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by ZIJLMANS on 2014-05-01 17:20

The NSK ESA 4-34018-700 drive is displaying Error Code E567. Equipment is not responding and motor is making a loud grinding noise. Urgent issue, please advise on next steps.

—> Purchase or Repair:

➡️ Reply

#NSK by Victor sciarrillo( delta steel) on 2012-01-23 16:36

We have a couple machines that use NSK drivesType:EM1010A15-05No. 103554-591The machine manufacturer said they are obsolete and can\'t sell us one. We willbuy new or rebuilt if you have either.

—> Purchase or Repair:

➡️ Reply

#NSK by mansuk hong on 2008-04-09 05:20

I\'d like to get a manual for nsk that is ESB014CFI-01A.I\'VE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY I\'M NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

—> Purchase or Repair:

➡️ Reply

#NSK by elyamini on 2014-12-22 20:44

Hello, I am interested in purchasing the NSK ESA 4-65006-700 Drive unit. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Singletary on 2014-12-05 00:23

Do you have an NSK ESA 4-65006-700 drive available for sale or repair? Need it urgently to keep production running smoothly. Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Dave Allen on 2009-01-19 14:09

We have a problem with ALL of our Tacumi toolchanger magazine carousels, when the magazine 1st homes the position is ALWAYS different.This is the SAME problem on EVERY machine.They all use the same NSK drive and motor.Drive type: ESA-Y3040T25-21 Motor type: YS3040FN501, No. 3Y31019Can you offer ANY …Purchase or Repair:

➡️ Reply

#NSK by Leo Solomon on 2016-11-15 09:13

Gud DayThe NSK ESA-Y2003A23-21 driver that we have is having a big trouble on its communication , it wont make the motor to initialize, it only goes on one side of initialization and does not goes to its original position, but when we try to manually rotate it using handy controller configuration, i…Purchase or Repair:

➡️ Reply

#NSK by Eric Ronnebaum on 2015-10-28 15:15

Dear sales I need a repair on a nsk RW1410FN523 motor. My customer is stating it making loader then normal noises and it harder to rotated by hand. The NSK amplifier is M-EP1410A15-05We would like to have a estimate if possible to go through it. I don\'t know if this is possible without looking at t…Purchase or Repair:

➡️ Reply

#NSK by Kohlbrenner Chris on 2008-02-11 08:31

Hello, we have a Problem with an NSK \"ESA Y2020 TF6-20\", No: 2-05407-700. It shows \"F 4\" on the Display and we don\'t know, what that means. Please send us an Answer as soon as possible.Please send us also a list of every possible Alarm, which could be shown on the Display.The Adress is above, p…Purchase or Repair:

➡️ Reply

#NSK by Alex Cheong on 2012-02-17 04:24

Dear Sir,We are trading company located in Malaysia looking for the possibility to repairing several type of OEM NSK DD motor and Driver as below,DD Motor type,1) M-JSB015FA503DD motor Drivers,2) M-ESA-D017-CF13) ESA-JB015CF3-204) M-EDC-PS3015CB5F5-01Kindly advise the possibility, prices, lead time,…Purchase or Repair:

➡️ Reply

#NSK by Anand on 2009-06-27 11:07

Dear repair center,We need to repairing NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!Warm regardsAnand

—> Purchase or Repair:

➡️ Reply

#NSK by karim on 2006-03-06 00:00

NSK 4083141 showing no power or response when turned on. Need immediate repair service to diagnose and fix issue.

—> Purchase or Repair:

➡️ Reply

#NSK by Alain David on 2014-01-17 15:55

I am a business customer inquiring about repair service for my NSK FMDI 01 MDI Pendant. The unit is not turning on at all, despite multiple attempts to power it up. I have checked the power source and cables, and they seem to be in proper working condition. The estimated replacement cost for a new N…Purchase or Repair:

➡️ Reply

#NSK by HEDI on 2011-11-09 08:40

Hello,We need a servo drive NSK Ref: EM040BK13-05/NSK Machine NETSTAL injection (injection of CD-R), No. :04-2323-65.Thank you for sending me your best price offer

—> Purchase or Repair:

➡️ Reply

#NSK by Andy on 2012-11-29 23:44

We are working on our study thesis and our problem is we can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive and how we could possible sol…Purchase or Repair:

➡️ Reply

#NSK by Todd Havinga on 2008-02-21 21:30

Is there a reason why we have to constantly recalibrate the Home position on these drives, We are usins the ESA-Y3040T25-21

—> Purchase or Repair:

➡️ Reply

#NSK by BIOTECH on 2014-12-03 23:23

Can this NSK ESA 4-65006-700 Drive be repaired or bought? I am looking to check this off my to-do list.

—> Purchase or Repair:

➡️ Reply

NSK Service & Repair Forum

Reply🗨️Ask a New Question Below❓

Recent 96 Comments

Contact Us

🚑Shop Location🛠️

📞Phone

📦Mailing Address🚛