NSK Service & Repair Forum

Could you please provide repair information for NSK ESA 4-34018-700 Drive? It's urgent, and we're on-site trying to get it fixed quickly. Thank you!

β€”> Purchase or Repair: Ticket Image

β€” Posted by brecea on 2014-02-10

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "NSK"

If you need your NSK unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 96 Comments

#NSK by mdali on 2014-12-25 07:44
Hello, I am inquiring about part number NSK ESA 4-34018-700 described as a drive. My client is experiencing an issue with it. Can you please provide information on how we can proceed with repair or troubleshooting? Thank you.

β€”> Purchase or Repair:
#NSK by Doreen Rogers on 2010-11-18 18:01
Hello, I am looking for the following bearing for NSK RW1410FN523 servo motor.The part number is 150DXR007DD / NRXT15025 C8P5 sealed bearing outer race / inner race Is this something you may have available for sale ?

β€”> Purchase or Repair:
#NSK by Ray Paden on 2014-12-17 05:44
The NSK ESA 4-65006-700 drive unit malfunctioned today at 1045 AM, causing unexpected downtime on the production line. Can you quickly check the issue and provide a solution before the next shift starts? Thank you.

β€”> Purchase or Repair:
#NSK by Eric Enloe on 2014-02-14 11:58
Hello, I'm reaching out on behalf of a client who needs assistance with an NSK ESA 4-65006-700 drive. Can you please provide information on repair services available for this part? Thank you.

β€”> Purchase or Repair:
#NSK by brecea on 2014-02-10 21:04
Could you please provide repair information for NSK ESA 4-34018-700 Drive? It's urgent, and we're on-site trying to get it fixed quickly. Thank you!

β€”> Purchase or Repair:
#NSK by Scott Boynton on 2008-04-14 22:16
Hello, I have a NSK ESA Y2020 drive that appears a blown optoisolator on the quadrature encoder output. The A, B, B*, Z and Z* channels work normaly, with a zero to five volt throw, but the A* channel only has about a half volt thow. Of course this is preventing it from working properly. Can you off…Purchase or Repair: Ticket Image...
Show More
#NSK by Dave Allen on 2009-01-19 14:09
We have a problem with ALL of our Tacumi toolchanger magazine carousels, when the magazine 1st homes the position is ALWAYS different.This is the SAME problem on EVERY machine.They all use the same NSK drive and motor.Drive type: ESA-Y3040T25-21 Motor type: YS3040FN501, No. 3Y31019Can you offer ANY …Purchase or Repair: Ticket Image...
Show More
#NSK by Olaf Rekman on 2011-05-19 14:41
Dear Sir,I am looking for a programming terminal for NSK driver type EMBO14AF2 Looking forward to hear from You,Best regardsOlaf RekmanStokkanhaugen 1167048 Trondheim – NorwayPhone +47 90963306olafrekman@gmail.com

β€”> Purchase or Repair:
#NSK by Volker Schmidt on 2009-01-07 10:26
We hava some drivers with the PN ESA-BO14CFD-21 or ESA-BO14CF3-11I can communicate over hyper terminal but not all command work, TS, TC, IO0/RB but some commands do not work like TT, MN.Do you have any idear?Thanks for help Volker

β€”> Purchase or Repair:
#NSK by BIOTECH on 2014-12-03 23:23
Can this NSK ESA 4-65006-700 Drive be repaired or bought? I am looking to check this off my to-do list.

β€”> Purchase or Repair:
#NSK by Francesco Baldassa on 2010-09-17 09:10
Hello ,we need repair some parts NSK servodrive have you an office or desk manager in italy ?best regards Mr Francesco Baldassa

β€”> Purchase or Repair:
#NSK by Pelc on 2014-12-28 15:06
Hello, I'm reaching out on behalf of a client who has an NSK ESA 4-65006-700 Drive that needs repair. Can you please provide information on how we can proceed with the repair process and obtain a quote? Thank you.

β€”> Purchase or Repair:
#NSK by Gilberto Saraiva on 2008-03-14 00:18
Good Morning:I need the manual of servo drive EM0608A05-05 NSK. Could you help-me please?.Thanks a lot

β€”> Purchase or Repair:
#NSK by edward on 2024-11-06 00:00
NSK ESA-B014CF3-11 servo drive not responding. Production halted. Need immediate assistance to troubleshoot and repair.

β€”> Purchase or Repair:
#NSK by Chansac on 2014-02-13 07:58
NSK ESA 4-34018-700 is showing error code E403 and not responding. Need urgent assistance to troubleshoot and restore operation.

β€”> Purchase or Repair:
#NSK by Tom on 2007-03-03 02:20
Can you repair a ESLZ10CF1-01 drive and what is the turn around time? We have been sending these to another repair facility but we get about 20% of them back saying unable to repair. Can you help us ?ThanksTom

β€”> Purchase or Repair:
#NSK by KUMARADEVAN SANTANADEWAN on 2009-06-08 10:55
I have one unit of NSK motor controller model NSK AMD EXC3 for repair.I would like to have advice, the frequent faulty of this module during production. Most of the fauly is burn IC of M1050 at Y and X- axis motor. Pls advice!

β€”> Purchase or Repair:
#NSK by elyamini on 2014-12-22 20:44
Hello, I am interested in purchasing the NSK ESA 4-65006-700 Drive unit. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

β€”> Purchase or Repair:
#NSK by Mrs Mohan on 2007-05-24 13:41
The above mentioned drive needs repair.

β€”> Purchase or Repair:
#NSK by Victor sciarrillo( delta steel) on 2012-01-23 16:36
We have a couple machines that use NSK drivesType:EM1010A15-05No. 103554-591The machine manufacturer said they are obsolete and can\'t sell us one. We willbuy new or rebuilt if you have either.

β€”> Purchase or Repair:
#NSK by dao on 2023-09-30 00:00
The Nsk esa-j1003af2-11 ESA Servo Drive is malfunctioning, causing a production line downtime. Urgent repair is needed to restore operations

β€”> Purchase or Repair:
#NSK by Navjot Singh on 2007-09-24 11:06
plz email the detail Manual and Software for NSK Servo ESA B045Af3-21 . with Regard Navjot Singh

β€”> Purchase or Repair:
#NSK by NormanLew on 2022-03-02 05:25
Hello. And Bye.

β€”> Purchase or Repair:
#NSK by Vacev on 2014-12-27 00:06
Could you please provide me with information on pricing and availability for the NSK ESA 4-65006-700 Drive? I am interested in sourcing one quickly. Thank you.

β€”> Purchase or Repair:
#NSK by ScottHug on 2017-10-14 02:46
#NSK by Andy on 2007-10-08 13:13
I from Russia.We do not have service NSK.I have read through the message I wish to ask. Service a manual is necessary to me.At me has deteriorated ESK-Y4080FT1-20 the driver.The ballast resistor 200 Ohms and the field transistor 2SK2662 burns down.I want the scheme or consultation.β€”> …Purchase or Repair: Ticket Image...
Show More
#NSK by BesterPreisvergleich on 2011-12-04 10:31
Hallo, ich habe eine tolle Seite entdeckt,bei der man einfach den billigsten Preis fΓΌr allerlei Dinge suchen kann. Hier ist der link Bester Preisvergleich Ach ja, ausserdem findet man dort jede Menge Gutscheine, was natΓΌrlich toll ist!.

β€”> Purchase or Repair:
#NSK by Hans van der Hoorn on 2025-06-01 18:27
The NSK EM1010A15-05 drive unit is not working. Please check and repair.

β€”> Purchase or Repair:
#NSK by Des on 2014-05-03 07:20
Hello, I am interested in purchasing the NSK ESA 4-34018-700 Drive. I am looking to source one quickly and wanted to inquire about pricing and availability. Thank you!

β€”> Purchase or Repair:
#NSK by Virgil on 2014-12-28 10:06
NSK ESA 4-65006-700 drive just failed, need urgent attention. Moving to next machine now to continue rounds.

β€”> Purchase or Repair:
#NSK by Rodolfo Vargas Santamaria on 2009-09-04 19:07
I have Motor Drive Type ESA-0810A35-21.1 NO. 0812484This device sent to display the code letter P - 1 and put the power light yellow color.My question is what is this code

β€”> Purchase or Repair:
#NSK by Vishnumurthy on 2010-04-16 14:46
Please send me the PDF for type ESA-B045AF3-21 number B-2X011-700.And also provide the service center name/ details in Bengaluru, Karnataka, India.RegardsVishnumurthy

β€”> Purchase or Repair:
#NSK by Chitfreerve on 2014-10-31 22:57
The NSK ESA 4-65006-700 drive unit experienced a malfunction earlier today, causing downtime from 130 PM to 300 PM. We need to address this issue

β€”> Purchase or Repair:
#NSK by Alain David on 2014-01-17 15:55
I am a business customer inquiring about repair service for my NSK FMDI 01 MDI Pendant. The unit is not turning on at all, despite multiple attempts to power it up. I have checked the power source and cables, and they seem to be in proper working condition. The estimated replacement cost for a new N…Purchase or Repair: Ticket Image...
Show More
#NSK by Mark Proctor on 2007-04-03 10:08
NSK ES3040K23-03 Servo DriveHi, We have an NSK ES3040K23-03 servo drive that requires repair.Do you have a fixed price repair on this unit?Please advise as soon as possible.ThanksMark Proctor

β€”> Purchase or Repair:
#NSK by Kevin Lim on 2011-05-24 01:23
My Scanray X-ray systems having the problem to activite X-ray operation, every time I\'m switched on the X-ray operation and it turn down immediately, and the control panel can not adjust the Ma setting. it is always fixed at 2Ma.

β€”> Purchase or Repair:
#NSK by ZIJLMANS on 2014-05-01 17:20
The NSK ESA 4-34018-700 drive is displaying Error Code E567. Equipment is not responding and motor is making a loud grinding noise. Urgent issue, please advise on next steps.

β€”> Purchase or Repair:
#NSK by mansuk hong on 2008-04-09 05:20
I\'d like to get a manual for nsk that is ESB014CFI-01A.I\'VE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY I\'M NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

β€”> Purchase or Repair:
#NSK by suresh on 2009-02-16 17:39
we bought RF TX and RX encoder decoder kits from nsk electronics.but when we use our modules there is no output.if we come to u whether u test it

β€”> Purchase or Repair:
#NSK by James Park on 2010-10-20 00:24
Hello,We have a upper and lower driver we need to get repaired. The type is ESA-B014CFC-21 and the NO. is B-13004-700. They both are not accurate so we were wondering if we can send them to you guys and have the calibrated. Please give me a call back or shoot me an email and hopefully we can figure …Purchase or Repair: Ticket Image...
Show More
#NSK by Singletary on 2014-12-05 00:23
Do you have an NSK ESA 4-65006-700 drive available for sale or repair? Need it urgently to keep production running smoothly. Thank you.

β€”> Purchase or Repair:
#NSK by Brian Tam on 2007-05-21 22:40
Hi :we need repair some parts NSK servodrive or servo motor Do you have NSK E043SAPA1-002 for sale..

β€”> Purchase or Repair:
#NSK by Andy on 2012-11-29 23:34
I can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive? Thanks for any Ideas. Andy

β€”> Purchase or Repair:
#NSK by Anand on 2009-06-27 11:07
Dear repair center,We need to repairing NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!Warm regardsAnand

β€”> Purchase or Repair:
#NSK by karim on 2006-03-06 00:00
NSK 4083141 showing no power or response when turned on. Need immediate repair service to diagnose and fix issue.

β€”> Purchase or Repair:
#NSK by Cheol Min Part on 2009-06-25 14:17
Dear Sir.I wonder whether you can fix this driver or not.(M-ELC-JG014VF1)If you can, let me know estimates and delivery time.If you need picture, I\'ll send you some pictures.Thanks.

β€”> Purchase or Repair:
#NSK by MARTIN Michel on 2007-04-17 16:22
Hello ,we need repair some parts NSK servodrive or servo motor .have you an office or desk manager in france ?best regards Mr MARTIN Michel

β€”> Purchase or Repair:
#NSK by ANIL KUMAR P on 2008-08-21 09:05
Dear sir Please send english vertion manual of K20093-01-01 . PDF manual belongs to NSK servo drive model no. = β€šdβ€šwβ€šdβ€š`β€šP|β€šOβ€šOβ€šPβ€šOβ€š`β€šOβ€šO|β€šOβ€šRRegardsAnil

β€”> Purchase or Repair:
#NSK by Mendieta on 2014-12-17 00:44
Hello, the NSK ESA 4-34018-700 Drive unit is still down. Please provide an update

β€”> Purchase or Repair:
#NSK by Mfg on 2014-12-26 03:06
Could you please confirm if the NSK ESA 4-34018-700 is still supported or if replacement parts are available for this drive unit? Thank you.

β€”> Purchase or Repair:

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.