Troubleshooting NSK: Common problems and repair info

NSK for Service call 1-336-969-0110 at Industrial Electronics Repair

NSK Service & Repair Forum

The NSK ELA-B014CFC-03 unit in the warehouse is displaying unusual behavior; it's not functioning as it normally does. Please investigate the issue further to determine the cause and potential solution.

—> Purchase or Repair:

— Posted by valerio hernandez on 2024-08-20

Reply🗨️Ask a New Question Below❓

Recent 96 Comments

#NSK by Ray Paden on 2014-12-17 05:44

The NSK ESA 4-65006-700 drive unit malfunctioned today at 1045 AM, causing unexpected downtime on the production line. Can you quickly check the issue and provide a solution before the next shift starts? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Moises Tovar on 2008-07-09 14:51

I need a NSK driver part no. EE0608A05-25 SERIE. 065221

—> Purchase or Repair:

➡️ Reply

#NSK by Al Urbonas on 2025-05-22 08:40

The NSK ESB014CF1-01A is not functioning properly. Please check and repair as needed. Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Volker Schmidt on 2009-01-07 10:26

We hava some drivers with the PN ESA-BO14CFD-21 or ESA-BO14CF3-11I can communicate over hyper terminal but not all command work, TS, TC, IO0/RB but some commands do not work like TT, MN.Do you have any idear?Thanks for help Volker

—> Purchase or Repair:

➡️ Reply

#NSK by Todd Havinga on 2008-02-21 21:30

Is there a reason why we have to constantly recalibrate the Home position on these drives, We are usins the ESA-Y3040T25-21

—> Purchase or Repair:

➡️ Reply

#NSK by Tom on 2007-03-03 02:20

Can you repair a ESLZ10CF1-01 drive and what is the turn around time? We have been sending these to another repair facility but we get about 20% of them back saying unable to repair. Can you help us ?ThanksTom

—> Purchase or Repair:

➡️ Reply

#NSK by Leo Solomon on 2016-11-15 09:13

Gud DayThe NSK ESA-Y2003A23-21 driver that we have is having a big trouble on its communication , it wont make the motor to initialize, it only goes on one side of initialization and does not goes to its original position, but when we try to manually rotate it using handy controller configuration, i…Purchase or Repair:

➡️ Reply

#NSK by Andy on 2012-11-29 23:44

We are working on our study thesis and our problem is we can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive and how we could possible sol…Purchase or Repair:

➡️ Reply

#NSK by Victor sciarrillo( delta steel) on 2012-01-23 16:36

We have a couple machines that use NSK drivesType:EM1010A15-05No. 103554-591The machine manufacturer said they are obsolete and can\'t sell us one. We willbuy new or rebuilt if you have either.

—> Purchase or Repair:

➡️ Reply

#NSK by mansuk hong on 2008-04-09 05:20

I\'d like to get a manual for nsk that is ESB014CFI-01A.I\'VE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY I\'M NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

—> Purchase or Repair:

➡️ Reply

#NSK by Olaf Rekman on 2011-05-19 14:41

Dear Sir,I am looking for a programming terminal for NSK driver type EMBO14AF2 Looking forward to hear from You,Best regardsOlaf RekmanStokkanhaugen 1167048 Trondheim – NorwayPhone +47 90963306olafrekman@gmail.com

—> Purchase or Repair:

➡️ Reply

#NSK by Chitfreerve on 2014-10-31 22:57

The NSK ESA 4-65006-700 drive unit experienced a malfunction earlier today, causing downtime from 130 PM to 300 PM. We need to address this issue

—> Purchase or Repair:

➡️ Reply

#NSK by Mfg on 2014-12-26 03:06

Could you please confirm if the NSK ESA 4-34018-700 is still supported or if replacement parts are available for this drive unit? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Marhaeni Tambrin on 2009-05-29 06:06

Dear Sir / MadamWe need repair or buy servo drive M-ESA-Y2020 G23have you an office or desk manager in Indonesia or Singapore ?We will appreciate for your immediately reply.Best Regards,MarhaeniPurchasing of PT. Akeda Multi MediaJl. KH. Moh. Mansyur No. 11 Blok B 8-12Jakarta 10140 - INDONESIA.Telp. …Purchase or Repair:

➡️ Reply

#NSK by Pelc on 2014-12-28 15:06

Hello, I'm reaching out on behalf of a client who has an NSK ESA 4-65006-700 Drive that needs repair. Can you please provide information on how we can proceed with the repair process and obtain a quote? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by James Park on 2010-10-20 00:24

Hello,We have a upper and lower driver we need to get repaired. The type is ESA-B014CFC-21 and the NO. is B-13004-700. They both are not accurate so we were wondering if we can send them to you guys and have the calibrated. Please give me a call back or shoot me an email and hopefully we can figure …Purchase or Repair:

➡️ Reply

#NSK by Hans van der Hoorn on 2025-06-01 18:27

The NSK EM1010A15-05 drive unit is not working. Please check and repair.

—> Purchase or Repair:

➡️ Reply

#NSK by Kohlbrenner Chris on 2008-02-11 08:31

Hello, we have a Problem with an NSK \"ESA Y2020 TF6-20\", No: 2-05407-700. It shows \"F 4\" on the Display and we don\'t know, what that means. Please send us an Answer as soon as possible.Please send us also a list of every possible Alarm, which could be shown on the Display.The Adress is above, p…Purchase or Repair:

➡️ Reply

#NSK by Anand on 2009-06-27 11:07

Dear repair center,We need to repairing NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!Warm regardsAnand

—> Purchase or Repair:

➡️ Reply

#NSK by Marcell on 2014-07-29 21:24

The NSK ESA 4-65006-700 drive seems to be experiencing some issues, as something has stopped working. I apologize for not being able to provide a more detailed description, but we'll do our best to get it sorted out for you. Thank you for your understanding.

—> Purchase or Repair:

➡️ Reply

#NSK by marjan cresnar on 2008-04-08 06:53

we have a problem whit NSK servo drive Type ESA-Y2020T23-11Nr. Z-85192 -700Fault on electronic plate NSK Eo43SACB1-001Pleace give as offer for repaire or a new one.Best RegardsMarjan

—> Purchase or Repair:

➡️ Reply

#NSK by MARIO BALANDRAN on 2013-02-06 23:44

we are look9ing for KSK drive EE1010A98-25

—> Purchase or Repair:

➡️ Reply

#NSK by Thoma on 2014-02-17 07:58

Hello, I'm interested in the NSK ESA 4-65006-700 drive. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you!

—> Purchase or Repair:

➡️ Reply

#NSK by Curtis Indy on 2011-01-31 14:34

We are running an NSK ESA-Y2020A25-21 drive. On startup it displays an error code of E0A4. What is this error and is it a repair situation?

—> Purchase or Repair:

➡️ Reply

#NSK by Eric Enloe on 2014-02-14 11:58

Hello, I'm reaching out on behalf of a client who needs assistance with an NSK ESA 4-65006-700 drive. Can you please provide information on repair services available for this part? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by TOMAS MARIN on 2010-07-02 23:25

I GOT A PROBLEM BUT I DONT KNOW WHERE COULD BE IF IN MOTOR OR IN DRIVE MY DRIVE IS AN NSK ESA Y3040TF120 AND THE MOTOR THE FAULT ON THE DRIVE IS F-1 AND A- 4 AND THE MAIN PROBLEM IS ON THE TOURRET INDEXING SO I CAN NOT SEE ON DYSPLAY THE NUMBER OF THE TOOL

—> Purchase or Repair:

➡️ Reply

#NSK by Alex Cheong on 2012-02-17 04:24

Dear Sir,We are trading company located in Malaysia looking for the possibility to repairing several type of OEM NSK DD motor and Driver as below,DD Motor type,1) M-JSB015FA503DD motor Drivers,2) M-ESA-D017-CF13) ESA-JB015CF3-204) M-EDC-PS3015CB5F5-01Kindly advise the possibility, prices, lead time,…Purchase or Repair:

➡️ Reply

#NSK by yasser on 2009-12-05 13:34

good evening .i hope all stuff ok. plz i have proplem, in my netestal machine about robot moving hand .this problem come from servo drive give me error f4 and i read in book its friom emergency switch but i check all emergency ok. i try another drive it work and give letter C but problem difference …Purchase or Repair:

➡️ Reply

#NSK by Chansac on 2014-02-13 07:58

NSK ESA 4-34018-700 is showing error code E403 and not responding. Need urgent assistance to troubleshoot and restore operation.

—> Purchase or Repair:

➡️ Reply

#NSK by Schwaertzel on 2014-04-14 20:32

NSK ESA 4-65006-700 drive is malfunctioning, halting the production line. Urgent repair service needed to fix the issue immediately.

—> Purchase or Repair:

➡️ Reply

#NSK by thiagu on 2008-02-27 03:35

hi, im looking for nsk controller which the model no is EM0608A15-05. I aloso got 1 faulty controller need to be repair. pls send me the quotation togather with trasportation.

—> Purchase or Repair:

➡️ Reply

#NSK by Marleen Schepens on 2014-08-10 09:10

Looking for a technician to repair my NSK ESA 4-34018-700 industrial drive unit. It's currently not powering on and is affecting production. Need urgent assistance to get it back up and running. Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by KUMARADEVAN SANTANADEWAN on 2009-06-08 10:55

I have one unit of NSK motor controller model NSK AMD EXC3 for repair.I would like to have advice, the frequent faulty of this module during production. Most of the fauly is burn IC of M1050 at Y and X- axis motor. Pls advice!

—> Purchase or Repair:

➡️ Reply

#NSK by ZIJLMANS on 2014-05-01 17:20

The NSK ESA 4-34018-700 drive is displaying Error Code E567. Equipment is not responding and motor is making a loud grinding noise. Urgent issue, please advise on next steps.

—> Purchase or Repair:

➡️ Reply

#NSK by Cacho on 2014-09-07 17:20

Hello, we are in urgent need of repair info for our NSK ESA 4-65006-700 Drive. Can you please provide guidance on how we can proceed with fixing this issue? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by BIOTECH on 2014-12-03 23:23

Can this NSK ESA 4-65006-700 Drive be repaired or bought? I am looking to check this off my to-do list.

—> Purchase or Repair:

➡️ Reply

#NSK by Jim Bianchi on 2014-12-29 13:54

I am following up on the previous message regarding the NSK ESA 4-65006-700 Drive unit. The unit is still down. Please ensure someone gets back to me

—> Purchase or Repair:

➡️ Reply

#NSK by MARTIN Michel on 2007-04-17 16:22

Hello ,we need repair some parts NSK servodrive or servo motor .have you an office or desk manager in france ?best regards Mr MARTIN Michel

—> Purchase or Repair:

➡️ Reply

#NSK by RAFAEL LOYA on 2008-08-03 19:35

I HAVE A PROBLEM WHIT A SERVO DRIVE AMP ESA_Y3040T25-21, I NEED A CATALOG OF ITEM PLEASE THANKS ALL

—> Purchase or Repair:

➡️ Reply

#NSK by Dave Allen on 2009-01-19 14:09

We have a problem with ALL of our Tacumi toolchanger magazine carousels, when the magazine 1st homes the position is ALWAYS different.This is the SAME problem on EVERY machine.They all use the same NSK drive and motor.Drive type: ESA-Y3040T25-21 Motor type: YS3040FN501, No. 3Y31019Can you offer ANY …Purchase or Repair:

➡️ Reply

#NSK by Navjot Singh on 2007-09-24 11:06

plz email the detail Manual and Software for NSK Servo ESA B045Af3-21 . with Regard Navjot Singh

—> Purchase or Repair:

➡️ Reply

#NSK by Mark Proctor on 2007-04-03 10:08

NSK ES3040K23-03 Servo DriveHi, We have an NSK ES3040K23-03 servo drive that requires repair.Do you have a fixed price repair on this unit?Please advise as soon as possible.ThanksMark Proctor

—> Purchase or Repair:

➡️ Reply

#NSK by suresh on 2009-02-16 17:39

we bought RF TX and RX encoder decoder kits from nsk electronics.but when we use our modules there is no output.if we come to u whether u test it

—> Purchase or Repair:

➡️ Reply

#NSK by Doreen Rogers on 2010-11-18 18:01

Hello, I am looking for the following bearing for NSK RW1410FN523 servo motor.The part number is 150DXR007DD / NRXT15025 C8P5 sealed bearing outer race / inner race Is this something you may have available for sale ?

—> Purchase or Repair:

➡️ Reply

#NSK by Jesus Escobedo on 2009-10-02 17:52

We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,Jesús EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuada…Purchase or Repair:

➡️ Reply

#NSK by Eric Ronnebaum on 2015-10-28 15:15

Dear sales I need a repair on a nsk RW1410FN523 motor. My customer is stating it making loader then normal noises and it harder to rotated by hand. The NSK amplifier is M-EP1410A15-05We would like to have a estimate if possible to go through it. I don\'t know if this is possible without looking at t…Purchase or Repair:

➡️ Reply

#NSK by mdali on 2014-12-25 07:44

Hello, I am inquiring about part number NSK ESA 4-34018-700 described as a drive. My client is experiencing an issue with it. Can you please provide information on how we can proceed with repair or troubleshooting? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Maher Amara on 2011-11-16 11:48

If it\'s possible to repqir the SERVO DRIVE NSK type EMOAOBK13-05SPR-T4/Z-NS

—> Purchase or Repair:

➡️ Reply

#NSK by karim on 2006-03-06 00:00

NSK 4083141 showing no power or response when turned on. Need immediate repair service to diagnose and fix issue.

—> Purchase or Repair:

➡️ Reply

#NSK by Henri on 2014-01-05 10:53

Hello, I'm in the purchasing department and a colleague needs a replacement for an NSK ESA 4-65006-700 Drive. We can't locate one. Could you provide repair information? Thanks!

—> Purchase or Repair:

➡️ Reply

NSK Service & Repair Forum

Reply🗨️Ask a New Question Below❓

Recent 96 Comments

Contact Us

🚑Shop Location🛠️

📞Phone

📦Mailing Address🚛