NSK Service & Repair Forum

I\'d like to get a manual for nsk that is ESB014CFI-01A.I\'VE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY I\'M NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

β€”> Purchase or Repair: Ticket Image

β€” Posted by mansuk hong on 2008-04-09

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "NSK"

If you need your NSK unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 96 Comments

#NSK by Andy on 2012-11-29 23:44
We are working on our study thesis and our problem is we can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive and how we could possible sol…Purchase or Repair: Ticket Image...
Show More
#NSK by Doreen Rogers on 2010-11-18 18:01
Hello, I am looking for the following bearing for NSK RW1410FN523 servo motor.The part number is 150DXR007DD / NRXT15025 C8P5 sealed bearing outer race / inner race Is this something you may have available for sale ?

β€”> Purchase or Repair:
#NSK by Marhaeni Tambrin on 2009-05-29 06:06
Dear Sir / MadamWe need repair or buy servo drive M-ESA-Y2020 G23have you an office or desk manager in Indonesia or Singapore ?We will appreciate for your immediately reply.Best Regards,MarhaeniPurchasing of PT. Akeda Multi MediaJl. KH. Moh. Mansyur No. 11 Blok B 8-12Jakarta 10140 - INDONESIA.Telp. …Purchase or Repair: Ticket Image...
Show More
#NSK by Sergio Rodriguez on 2012-06-14 22:38
NSK Servo Drive Repair Model: EM1010A15-05 We have a NSK Servo Drive in bad conditions, when we turn on the machine light leds.I appreciate your comments, in case that you can to repair my servo drive.Best Regards Sergio Rodriguez Plant chiefProduction DepartmentAv. Los pinos #7 A Col. Los pinosGuad…Purchase or Repair: Ticket Image...
Show More
#NSK by Kohlbrenner Chris on 2008-02-11 08:31
Hello, we have a Problem with an NSK \"ESA Y2020 TF6-20\", No: 2-05407-700. It shows \"F 4\" on the Display and we don\'t know, what that means. Please send us an Answer as soon as possible.Please send us also a list of every possible Alarm, which could be shown on the Display.The Adress is above, p…Purchase or Repair: Ticket Image...
Show More
#NSK by Tom on 2007-03-03 02:20
Can you repair a ESLZ10CF1-01 drive and what is the turn around time? We have been sending these to another repair facility but we get about 20% of them back saying unable to repair. Can you help us ?ThanksTom

β€”> Purchase or Repair:
#NSK by Curtis Indy on 2011-01-31 14:34
We are running an NSK ESA-Y2020A25-21 drive. On startup it displays an error code of E0A4. What is this error and is it a repair situation?

β€”> Purchase or Repair:
#NSK by Hans van der Hoorn on 2025-06-01 18:27
The NSK EM1010A15-05 drive unit is not working. Please check and repair.

β€”> Purchase or Repair:
#NSK by HOVANEC on 2025-06-07 00:25
Can the NSK ESB014CF1-01A drive be repaired or replaced? I'm trying to check this off my to-do list. Thank you!

β€”> Purchase or Repair:
#NSK by Marleen Schepens on 2014-08-10 09:10
Looking for a technician to repair my NSK ESA 4-34018-700 industrial drive unit. It's currently not powering on and is affecting production. Need urgent assistance to get it back up and running. Thank you.

β€”> Purchase or Repair:
#NSK by MARTIN Michel on 2007-04-17 16:22
Hello ,we need repair some parts NSK servodrive or servo motor .have you an office or desk manager in france ?best regards Mr MARTIN Michel

β€”> Purchase or Repair:
#NSK by Anand on 2009-06-27 11:07
Dear repair center,We need to repairing NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!Warm regardsAnand

β€”> Purchase or Repair:
#NSK by edward on 2024-11-06 00:00
NSK ESA-B014CF3-11 servo drive not responding. Production halted. Need immediate assistance to troubleshoot and repair.

β€”> Purchase or Repair:
#NSK by Volker Schmidt on 2009-01-07 10:26
We hava some drivers with the PN ESA-BO14CFD-21 or ESA-BO14CF3-11I can communicate over hyper terminal but not all command work, TS, TC, IO0/RB but some commands do not work like TT, MN.Do you have any idear?Thanks for help Volker

β€”> Purchase or Repair:
#NSK by ScottHug on 2017-10-14 02:46
#NSK by BesterPreisvergleich on 2011-12-04 10:31
Hallo, ich habe eine tolle Seite entdeckt,bei der man einfach den billigsten Preis fΓΌr allerlei Dinge suchen kann. Hier ist der link Bester Preisvergleich Ach ja, ausserdem findet man dort jede Menge Gutscheine, was natΓΌrlich toll ist!.

β€”> Purchase or Repair:
#NSK by Vacev on 2014-12-27 00:06
Could you please provide me with information on pricing and availability for the NSK ESA 4-65006-700 Drive? I am interested in sourcing one quickly. Thank you.

β€”> Purchase or Repair:
#NSK by Mcguinness on 2014-12-23 15:06
Please provide me with detailed information about the NSK ESA 4-34018-700 Drive. We are looking into the possibility of finding replacement parts or repair options for this unit. Could you please confirm if it is still supported or if any parts are available for it? Thank you. β€”> …Purchase or Repair: Ticket Image...
Show More
#NSK by brecea on 2014-02-10 21:04
Could you please provide repair information for NSK ESA 4-34018-700 Drive? It's urgent, and we're on-site trying to get it fixed quickly. Thank you!

β€”> Purchase or Repair:
#NSK by George Morrow on 2025-05-30 06:07
I'm interested in purchasing an NSK B014CF7-02 Servo Drive. Do you have one available for sale or repair?

β€”> Purchase or Repair:
#NSK by Des on 2014-05-03 07:20
Hello, I am interested in purchasing the NSK ESA 4-34018-700 Drive. I am looking to source one quickly and wanted to inquire about pricing and availability. Thank you!

β€”> Purchase or Repair:
#NSK by Olaf Rekman on 2010-03-24 16:51
Dear sir,I am looking for a new or rebuilded NSK driver TYPE EMB014AF-2-05Please let me know.Regards - Olaf

β€”> Purchase or Repair:
#NSK by thiagu on 2008-02-27 03:35
hi, im looking for nsk controller which the model no is EM0608A15-05. I aloso got 1 faulty controller need to be repair. pls send me the quotation togather with trasportation.

β€”> Purchase or Repair:
#NSK by SABINUS on 2025-05-23 13:43
Hello, do you have an NSK ESA-B014CFD-21 driver available for sale or repair? Need it urgently for production. Thank you.

β€”> Purchase or Repair:
#NSK by Marcell on 2014-07-29 21:24
The NSK ESA 4-65006-700 drive seems to be experiencing some issues, as something has stopped working. I apologize for not being able to provide a more detailed description, but we'll do our best to get it sorted out for you. Thank you for your understanding.

β€”> Purchase or Repair:
#NSK by valerio hernandez on 2024-08-20 13:55
The NSK ELA-B014CFC-03 unit in the warehouse is displaying unusual behavior; it's not functioning as it normally does. Please investigate the issue further to determine the cause and potential solution.

β€”> Purchase or Repair:
#NSK by Chansac on 2014-02-13 07:58
NSK ESA 4-34018-700 is showing error code E403 and not responding. Need urgent assistance to troubleshoot and restore operation.

β€”> Purchase or Repair:
#NSK by Dave Allen on 2009-01-19 14:09
We have a problem with ALL of our Tacumi toolchanger magazine carousels, when the magazine 1st homes the position is ALWAYS different.This is the SAME problem on EVERY machine.They all use the same NSK drive and motor.Drive type: ESA-Y3040T25-21 Motor type: YS3040FN501, No. 3Y31019Can you offer ANY …Purchase or Repair: Ticket Image...
Show More
#NSK by Mrs Mohan on 2007-05-24 13:41
The above mentioned drive needs repair.

β€”> Purchase or Repair:
#NSK by Mfg on 2014-12-26 03:06
Could you please confirm if the NSK ESA 4-34018-700 is still supported or if replacement parts are available for this drive unit? Thank you.

β€”> Purchase or Repair:
#NSK by marjan cresnar on 2008-04-08 06:53
we have a problem whit NSK servo drive Type ESA-Y2020T23-11Nr. Z-85192 -700Fault on electronic plate NSK Eo43SACB1-001Pleace give as offer for repaire or a new one.Best RegardsMarjan

β€”> Purchase or Repair:
#NSK by Scott Boynton on 2008-04-14 22:16
Hello, I have a NSK ESA Y2020 drive that appears a blown optoisolator on the quadrature encoder output. The A, B, B*, Z and Z* channels work normaly, with a zero to five volt throw, but the A* channel only has about a half volt thow. Of course this is preventing it from working properly. Can you off…Purchase or Repair: Ticket Image...
Show More
#NSK by Rodolfo Vargas Santamaria on 2009-09-04 19:07
I have Motor Drive Type ESA-0810A35-21.1 NO. 0812484This device sent to display the code letter P - 1 and put the power light yellow color.My question is what is this code

β€”> Purchase or Repair:
#NSK by Henri on 2014-01-05 10:53
Hello, I'm in the purchasing department and a colleague needs a replacement for an NSK ESA 4-65006-700 Drive. We can't locate one. Could you provide repair information? Thanks!

β€”> Purchase or Repair:
#NSK by James Park on 2010-10-20 00:24
Hello,We have a upper and lower driver we need to get repaired. The type is ESA-B014CFC-21 and the NO. is B-13004-700. They both are not accurate so we were wondering if we can send them to you guys and have the calibrated. Please give me a call back or shoot me an email and hopefully we can figure …Purchase or Repair: Ticket Image...
Show More
#NSK by dao on 2023-09-30 00:00
The Nsk esa-j1003af2-11 ESA Servo Drive is malfunctioning, causing a production line downtime. Urgent repair is needed to restore operations

β€”> Purchase or Repair:
#NSK by Animesh on 2008-09-25 15:52
I have got a problem that the servo motor is getting fault.How could I repair when I get P1,P2 such kind of warning.

β€”> Purchase or Repair:
#NSK by DAVID CONTRERAS on 2014-12-06 06:23
The NSK ESA 4-34018-700 drive unit isn't working.

β€”> Purchase or Repair:
#NSK by Singletary on 2014-12-05 00:23
Do you have an NSK ESA 4-65006-700 drive available for sale or repair? Need it urgently to keep production running smoothly. Thank you.

β€”> Purchase or Repair:
#NSK by KUMARADEVAN SANTANADEWAN on 2009-06-08 10:55
I have one unit of NSK motor controller model NSK AMD EXC3 for repair.I would like to have advice, the frequent faulty of this module during production. Most of the fauly is burn IC of M1050 at Y and X- axis motor. Pls advice!

β€”> Purchase or Repair:
#NSK by Mark Proctor on 2007-04-03 10:08
NSK ES3040K23-03 Servo DriveHi, We have an NSK ES3040K23-03 servo drive that requires repair.Do you have a fixed price repair on this unit?Please advise as soon as possible.ThanksMark Proctor

β€”> Purchase or Repair:
#NSK by NormanLew on 2022-03-02 05:25
Hello. And Bye.

β€”> Purchase or Repair:
#NSK by Kevin Lim on 2011-05-24 01:23
My Scanray X-ray systems having the problem to activite X-ray operation, every time I\'m switched on the X-ray operation and it turn down immediately, and the control panel can not adjust the Ma setting. it is always fixed at 2Ma.

β€”> Purchase or Repair:
#NSK by Alex Cheong on 2012-02-17 04:24
Dear Sir,We are trading company located in Malaysia looking for the possibility to repairing several type of OEM NSK DD motor and Driver as below,DD Motor type,1) M-JSB015FA503DD motor Drivers,2) M-ESA-D017-CF13) ESA-JB015CF3-204) M-EDC-PS3015CB5F5-01Kindly advise the possibility, prices, lead time,…Purchase or Repair: Ticket Image...
Show More
#NSK by Tafheem on 2013-04-30 00:00
NSK ESA-Y3008A25-21 power supply unit is not turning on despite being plugged in. Need immediate repair assistance.

β€”> Purchase or Repair:
#NSK by Cacho on 2014-09-07 17:20
Hello, we are in urgent need of repair info for our NSK ESA 4-65006-700 Drive. Can you please provide guidance on how we can proceed with fixing this issue? Thank you.

β€”> Purchase or Repair:
#NSK by Maher Amara on 2011-11-16 11:48
If it\'s possible to repqir the SERVO DRIVE NSK type EMOAOBK13-05SPR-T4/Z-NS

β€”> Purchase or Repair:
#NSK by Navjot Singh on 2007-09-24 11:06
plz email the detail Manual and Software for NSK Servo ESA B045Af3-21 . with Regard Navjot Singh

β€”> Purchase or Repair:
#NSK by Chester Yong on 2010-08-12 09:15
dear sir,I would to check that do you able to repair this NSK driver model: ESA 23?

β€”> Purchase or Repair:
#NSK by Victor sciarrillo( delta steel) on 2012-01-23 16:36
We have a couple machines that use NSK drivesType:EM1010A15-05No. 103554-591The machine manufacturer said they are obsolete and can\'t sell us one. We willbuy new or rebuilt if you have either.

β€”> Purchase or Repair:

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.