NSK Service & Repair Forum

I GOT A PROBLEM BUT I DONT KNOW WHERE COULD BE IF IN MOTOR OR IN DRIVE MY DRIVE IS AN NSK ESA Y3040TF120 AND THE MOTOR THE FAULT ON THE DRIVE IS F-1 AND A- 4 AND THE MAIN PROBLEM IS ON THE TOURRET INDEXING SO I CAN NOT SEE ON DYSPLAY THE NUMBER OF THE TOOL

β€”> Purchase or Repair: Ticket Image

β€” Posted by TOMAS MARIN on 2010-07-02

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "NSK"

If you need your NSK unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 96 Comments

#NSK by Francesco Baldassa on 2010-09-17 09:10
Hello ,we need repair some parts NSK servodrive have you an office or desk manager in italy ?best regards Mr Francesco Baldassa

β€”> Purchase or Repair:
#NSK by Olaf Rekman on 2010-03-24 16:51
Dear sir,I am looking for a new or rebuilded NSK driver TYPE EMB014AF-2-05Please let me know.Regards - Olaf

β€”> Purchase or Repair:
#NSK by azadeh on 2014-05-01 22:20
Hello, our NSK ESA 4-65006-700 drive is down with error code E302. Urgent assistance needed to troubleshoot and resolve the issue. Thank you.

β€”> Purchase or Repair:
#NSK by Amal Raj on 2009-04-27 16:31
Dear sirPlz send pdf ofesa-b045af3-21RegardsS.Amal Raj

β€”> Purchase or Repair:
#NSK by Schwaertzel on 2014-04-14 20:32
NSK ESA 4-65006-700 drive is malfunctioning, halting the production line. Urgent repair service needed to fix the issue immediately.

β€”> Purchase or Repair:
#NSK by Scott Boynton on 2008-04-14 22:16
Hello, I have a NSK ESA Y2020 drive that appears a blown optoisolator on the quadrature encoder output. The A, B, B*, Z and Z* channels work normaly, with a zero to five volt throw, but the A* channel only has about a half volt thow. Of course this is preventing it from working properly. Can you off…Purchase or Repair: Ticket Image...
Show More
#NSK by mansuk hong on 2008-04-09 05:20
I\'d like to get a manual for nsk that is ESB014CFI-01A.I\'VE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY I\'M NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

β€”> Purchase or Repair:
#NSK by karim on 2006-03-06 00:00
NSK 4083141 showing no power or response when turned on. Need immediate repair service to diagnose and fix issue.

β€”> Purchase or Repair:
#NSK by Maher Amara on 2011-11-16 11:48
If it\'s possible to repqir the SERVO DRIVE NSK type EMOAOBK13-05SPR-T4/Z-NS

β€”> Purchase or Repair:
#NSK by ANIL KUMAR P on 2008-08-21 09:05
Dear sir Please send english vertion manual of K20093-01-01 . PDF manual belongs to NSK servo drive model no. = β€šdβ€šwβ€šdβ€š`β€šP|β€šOβ€šOβ€šPβ€šOβ€š`β€šOβ€šO|β€šOβ€šRRegardsAnil

β€”> Purchase or Repair:
#NSK by Victor sciarrillo( delta steel) on 2012-01-23 16:36
We have a couple machines that use NSK drivesType:EM1010A15-05No. 103554-591The machine manufacturer said they are obsolete and can\'t sell us one. We willbuy new or rebuilt if you have either.

β€”> Purchase or Repair:
#NSK by BesterPreisvergleich on 2011-12-04 10:31
Hallo, ich habe eine tolle Seite entdeckt,bei der man einfach den billigsten Preis fΓΌr allerlei Dinge suchen kann. Hier ist der link Bester Preisvergleich Ach ja, ausserdem findet man dort jede Menge Gutscheine, was natΓΌrlich toll ist!.

β€”> Purchase or Repair:
#NSK by Tafheem on 2013-04-30 00:00
NSK ESA-Y3008A25-21 power supply unit is not turning on despite being plugged in. Need immediate repair assistance.

β€”> Purchase or Repair:
#NSK by Volker Schmidt on 2009-01-07 10:26
We hava some drivers with the PN ESA-BO14CFD-21 or ESA-BO14CF3-11I can communicate over hyper terminal but not all command work, TS, TC, IO0/RB but some commands do not work like TT, MN.Do you have any idear?Thanks for help Volker

β€”> Purchase or Repair:
#NSK by TOMAS MARIN on 2010-07-02 23:25
I GOT A PROBLEM BUT I DONT KNOW WHERE COULD BE IF IN MOTOR OR IN DRIVE MY DRIVE IS AN NSK ESA Y3040TF120 AND THE MOTOR THE FAULT ON THE DRIVE IS F-1 AND A- 4 AND THE MAIN PROBLEM IS ON THE TOURRET INDEXING SO I CAN NOT SEE ON DYSPLAY THE NUMBER OF THE TOOL

β€”> Purchase or Repair:
#NSK by Mcguinness on 2014-12-23 15:06
Please provide me with detailed information about the NSK ESA 4-34018-700 Drive. We are looking into the possibility of finding replacement parts or repair options for this unit. Could you please confirm if it is still supported or if any parts are available for it? Thank you. β€”> …Purchase or Repair: Ticket Image...
Show More
#NSK by Henri on 2014-01-05 10:53
Hello, I'm in the purchasing department and a colleague needs a replacement for an NSK ESA 4-65006-700 Drive. We can't locate one. Could you provide repair information? Thanks!

β€”> Purchase or Repair:
#NSK by dao on 2023-09-30 00:00
The Nsk esa-j1003af2-11 ESA Servo Drive is malfunctioning, causing a production line downtime. Urgent repair is needed to restore operations

β€”> Purchase or Repair:
#NSK by ZIJLMANS on 2014-05-01 17:20
The NSK ESA 4-34018-700 drive is displaying Error Code E567. Equipment is not responding and motor is making a loud grinding noise. Urgent issue, please advise on next steps.

β€”> Purchase or Repair:
#NSK by Cheol Min Part on 2009-06-25 14:17
Dear Sir.I wonder whether you can fix this driver or not.(M-ELC-JG014VF1)If you can, let me know estimates and delivery time.If you need picture, I\'ll send you some pictures.Thanks.

β€”> Purchase or Repair:
#NSK by elyamini on 2014-12-22 20:44
Hello, I am interested in purchasing the NSK ESA 4-65006-700 Drive unit. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

β€”> Purchase or Repair:
#NSK by brecea on 2014-02-10 21:04
Could you please provide repair information for NSK ESA 4-34018-700 Drive? It's urgent, and we're on-site trying to get it fixed quickly. Thank you!

β€”> Purchase or Repair:
#NSK by Elkowich on 2014-02-13 04:58
The NSK ESA 4-65006-700 Drive unit is currently not functioning. Please investigate and provide a status update. Thank you.

β€”> Purchase or Repair:
#NSK by Chansac on 2014-02-13 07:58
NSK ESA 4-34018-700 is showing error code E403 and not responding. Need urgent assistance to troubleshoot and restore operation.

β€”> Purchase or Repair:
#NSK by Moises Tovar on 2008-07-09 14:51
I need a NSK driver part no. EE0608A05-25 SERIE. 065221

β€”> Purchase or Repair:
#NSK by suresh on 2009-02-16 17:39
we bought RF TX and RX encoder decoder kits from nsk electronics.but when we use our modules there is no output.if we come to u whether u test it

β€”> Purchase or Repair:
#NSK by Singletary on 2014-12-05 00:23
Do you have an NSK ESA 4-65006-700 drive available for sale or repair? Need it urgently to keep production running smoothly. Thank you.

β€”> Purchase or Repair:
#NSK by Khoa on 2014-01-07 06:22
The NSK ESA 4-34018-700 is a drive unit that is currently not working. The maintenance team needs assistance in resolving the issue.

β€”> Purchase or Repair:
#NSK by Mendieta on 2014-12-17 00:44
Hello, the NSK ESA 4-34018-700 Drive unit is still down. Please provide an update

β€”> Purchase or Repair:
#NSK by Peter Hamvai on 2009-05-11 13:34
Dear repair center,I\'m searching for a used(repaired) NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!If you haven\'t from this modul, please let me know around what is the repairing time with delivery if the wrong one is on Hungary now?!kind regardsPeter Hamvaiβ€”> …Purchase or Repair: Ticket Image...
Show More
#NSK by RAFAEL LOYA on 2008-08-03 19:35
I HAVE A PROBLEM WHIT A SERVO DRIVE AMP ESA_Y3040T25-21, I NEED A CATALOG OF ITEM PLEASE THANKS ALL

β€”> Purchase or Repair:
#NSK by NormanLew on 2022-03-02 05:25
Hello. And Bye.

β€”> Purchase or Repair:
#NSK by Todd Havinga on 2008-02-21 21:30
Is there a reason why we have to constantly recalibrate the Home position on these drives, We are usins the ESA-Y3040T25-21

β€”> Purchase or Repair:
#NSK by Moises Tovar on 2009-06-03 21:56
I need a Nsk driverEE0608A05-24.2 or substituteThank you

β€”> Purchase or Repair:
#NSK by Anand on 2009-06-27 11:07
Dear repair center,We need to repairing NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!Warm regardsAnand

β€”> Purchase or Repair:
#NSK by George Morrow on 2025-05-30 06:07
I'm interested in purchasing an NSK B014CF7-02 Servo Drive. Do you have one available for sale or repair?

β€”> Purchase or Repair:
#NSK by Cacho on 2014-09-07 17:20
Hello, we are in urgent need of repair info for our NSK ESA 4-65006-700 Drive. Can you please provide guidance on how we can proceed with fixing this issue? Thank you.

β€”> Purchase or Repair:
#NSK by Pelc on 2014-12-28 15:06
Hello, I'm reaching out on behalf of a client who has an NSK ESA 4-65006-700 Drive that needs repair. Can you please provide information on how we can proceed with the repair process and obtain a quote? Thank you.

β€”> Purchase or Repair:
#NSK by Rodolfo Vargas Santamaria on 2009-09-04 19:07
I have Motor Drive Type ESA-0810A35-21.1 NO. 0812484This device sent to display the code letter P - 1 and put the power light yellow color.My question is what is this code

β€”> Purchase or Repair:
#NSK by Jesus Escobedo on 2009-10-02 17:48
We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,JesΓΊs EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuada…Purchase or Repair: Ticket Image...
Show More
#NSK by Al Urbonas on 2025-05-22 08:40
The NSK ESB014CF1-01A is not functioning properly. Please check and repair as needed. Thank you.

β€”> Purchase or Repair:
#NSK by Jim Bianchi on 2014-12-29 13:54
I am following up on the previous message regarding the NSK ESA 4-65006-700 Drive unit. The unit is still down. Please ensure someone gets back to me

β€”> Purchase or Repair:
#NSK by Chester Yong on 2010-08-12 09:15
dear sir,I would to check that do you able to repair this NSK driver model: ESA 23?

β€”> Purchase or Repair:
#NSK by mdali on 2014-12-25 07:44
Hello, I am inquiring about part number NSK ESA 4-34018-700 described as a drive. My client is experiencing an issue with it. Can you please provide information on how we can proceed with repair or troubleshooting? Thank you.

β€”> Purchase or Repair:
#NSK by Animesh on 2008-09-25 15:52
I have got a problem that the servo motor is getting fault.How could I repair when I get P1,P2 such kind of warning.

β€”> Purchase or Repair:
#NSK by Marleen Schepens on 2014-08-10 09:10
Looking for a technician to repair my NSK ESA 4-34018-700 industrial drive unit. It's currently not powering on and is affecting production. Need urgent assistance to get it back up and running. Thank you.

β€”> Purchase or Repair:
#NSK by Mrs Mohan on 2007-05-24 13:41
The above mentioned drive needs repair.

β€”> Purchase or Repair:
#NSK by Marhaeni Tambrin on 2009-05-29 06:06
Dear Sir / MadamWe need repair or buy servo drive M-ESA-Y2020 G23have you an office or desk manager in Indonesia or Singapore ?We will appreciate for your immediately reply.Best Regards,MarhaeniPurchasing of PT. Akeda Multi MediaJl. KH. Moh. Mansyur No. 11 Blok B 8-12Jakarta 10140 - INDONESIA.Telp. …Purchase or Repair: Ticket Image...
Show More
#NSK by Mfg on 2014-12-26 03:06
Could you please confirm if the NSK ESA 4-34018-700 is still supported or if replacement parts are available for this drive unit? Thank you.

β€”> Purchase or Repair:
#NSK by Ray Paden on 2014-12-17 05:44
The NSK ESA 4-65006-700 drive unit malfunctioned today at 1045 AM, causing unexpected downtime on the production line. Can you quickly check the issue and provide a solution before the next shift starts? Thank you.

β€”> Purchase or Repair:

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.