Okuma Service & Repair Forum
We're experiencing issues with the Servo Velocity Controller Board (Okuma LB15 E4809-770-015-B). The board is failing and affecting the line's production speed. Please address this immediately to ensure minimal downtime.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "Okuma"
- Okuma → Okuma PPS60C E4809-747-005-E ↗
- Okuma → Okuma 5000 LSC OSP5001.G ↗
- Okuma → Okuma LB15 E4809-770-015-B ↗
- okuma machinery works → Okuma Machinery Works BL-D50A E4809-770-015-B ↗
- Okuma → Okuma 1006-1231-76D ↗
- Okuma → Okuma BDU-75A E4601-413-001 ↗
- Okuma & Howa → Okuma & Howa Okuma monitor repair ↗
- Okuma & Howa → repair or exchange ↗
- Okuma → Okuma BDU-50-A ↗
- Okuma → Okuma OPUS 5000 MODULE ↗
- Okuma → Okuma 1006-0614-63-16 BLII-D100A SERVO DRIVE ↗
- Okuma → Okuma 1006-1216-42-198 ↗
- Okuma → Okuma MIV0204A-1-B5 ↗
- Okuma → Okuma E4809-045-038-B1911 ↗
- Okuma & Howa → Okuma & Howa Glare filter ↗
- Okuma → Okuma BDU-30A ↗
If you need your Okuma unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 51 Comments
The monitor on the Okuma 5000 LSC OSP5001.G is flickering intermittently, affecting the production line. Need urgent repair to avoid disruptions.
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, One of our Okuma MIV0204A-1-B5 Servo Drives has malfunctioned and we need a replacement. Could you please provide us with repair information
—> Purchase or Repair:
—> Purchase or Repair:
The Okuma PPS60C E4809-747-005-E board went down during last night's shift. Please address the issue
—> Purchase or Repair:
—> Purchase or Repair:
Can the Okuma BDU-30A Brushless Servo Drive be repaired or purchased? I'm looking to resolve this as soon as possible. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Okuma 1006-1216-42-198 unit is not working as reported by the user in the shop.
—> Purchase or Repair:
—> Purchase or Repair:
Okuma 1006-1231-76d not powering on, no display or response. Need urgent repair service, please advise availability.
—> Purchase or Repair:
—> Purchase or Repair:
The unit is still down. I need assistance with the Okuma LB15 E4809-770-015-B Servo Velocity Controller Board. I expect a response this time. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Okuma Machinery Works BL-D50A E4809-770-015-B motor be repaired or purchased? Trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
Please advise if the Okuma PPS60C E4809-747-005-E board is still supported or if replacement parts are available. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Okuma BDU-75A E4601-413-001 servo drive is malfunctioning, causing a halt in production. It needs immediate attention for the production line to resume operations swiftly. Please prioritize resolving this issue to minimize downtime.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I see that the Okuma 1006-1231-76d is still down and no one has responded to the previous message. Can we please have someone address this issue immediately? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if the Okuma LB15 E4809-770-015-B Servo Velocity Controller Board is still supported or if replacement parts are available for this unit? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Okuma LB15 E4809-770-015-B servo velocity controller board malfunctioned mid-shift. Requires immediate attention and troubleshooting. Please investigate and resolve asap. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I am following up on my previous message regarding our Okuma Machinery Works BL-D50A E4809-770-015-B, which is currently down. We need assistance with the motor. Please reply
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm interested in the Okuma BDU-75A E4601-413-001 servo drive. I'm not entirely certain if this is the right model, but my team suggested I reach out. Could you please provide information on pricing and availability? I am looking to source this unit quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The monitor on the Okuma 5000 LSC OSP5001.G is malfunctioning, affecting production line efficiency. Please address this issue
—> Purchase or Repair:
—> Purchase or Repair:
Repair Issue Report for Okuma e4809-045-038-b1911Description UnknownDear Repair Shop,I am the inventory manager at our facility and have noticed that the Okuma e4809-045-038-b1911 unit has been consistently returned or reported. According to our records, multiple customers have cited various issues …Purchase or Repair: 
...
Show More
Show More
the Okuma PPS60C E4809-747-005-E board went down mid-shift. Need someone to look into this ASAP tomorrow. Appreciate it!
—> Purchase or Repair:
—> Purchase or Repair:
The Servo Velocity Controller Board on the Okuma LB15 E4809-770-015-B just failed, requiring immediate attention to ensure production is not impacted.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please provide information regarding the availability of support or replacement parts for the Okuma PPS60C E4809-747-005-E board?
—> Purchase or Repair:
—> Purchase or Repair:
The Servo Velocity Controller Board (part number E4809-770-015-B) on the Okuma LB15 machine is malfunctioning, causing a significant slowdown in production. We need urgent repair service to resolve this issue
—> Purchase or Repair:
—> Purchase or Repair:
Hey there! Just a heads-up, one of the drives or boards on the Okuma OPUS 5000 Module has failed. Need to check it out ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I need repair information for an Okuma LB15 E4809-770-015-B Servo Velocity Controller Board. Can you please provide details on how we can proceed with the repair? A quick response would be greatly appreciated. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Okuma LB15 E4809-770-015-B Servo Velocity Controller Board is exhibiting irregular behavior. It is not functioning as it typically does, displaying unusual actions.
—> Purchase or Repair:
—> Purchase or Repair:
I have an Okuma Operator panel 5020 LSY E0105-800-138 That is in need of repair or replacement. Can you provide a Quote?
—> Purchase or Repair:
—> Purchase or Repair:
The Okuma LB15 E4809-770-015-B is showing error code E-#### (specific code). The equipment is not responding and the servo velocity is not being controlled properly. Please advise on necessary steps to troubleshoot and resolve the issue
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an Okuma PPS60C E4809-747-005-E board available for sale or repair? Our unit went down, and we need to keep production running.
—> Purchase or Repair:
—> Purchase or Repair:
Okuma LB15 E4809-770-015-B servo velocity controller board is malfunctioning, affecting the line's production. Urgent repair or replacement needed to resume operations immediately.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if the Okuma PPS60C E4809-747-005-E board is still supported or if replacement parts are available for this unit? It's older, and our team is uncertain about the manufacturer. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hey, the Okuma LB15 E4809-770-015-B servo velocity controller board failed. Need to swap it out ASAP to get the machine back online.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am interested in purchasing an Okuma LB15 E4809-770-015-B Servo Velocity Controller Board. I just wanted to confirm the pricing and availability for this unit. I am looking to source one quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Can you please provide pricing and availability information for the Okuma LB15 E4809-770-015-B Servo Velocity Controller Board? We are looking to source this unit quickly and want to ensure it is the correct model. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
We are experiencing issues with the Servo Velocity Controller Board (Okuma LB15 E4809-770-015-B) affecting the line. Please prioritize addressing this matter to minimize production downtime.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced unexpected downtime with the Okuma PPS60C E4809-747-005-E board earlier today during the morning shift. Can you provide some insight on what might have caused the issue and recommend a course of action to prevent it from happening again? Your
—> Purchase or Repair:
—> Purchase or Repair:
The Okuma BDU-50-A servo drive in my equipment isn't functioning properly - it's failing to control the motor speed correctly, resulting in disrupted operations. Given the importance of this unit, I would like to inquire about repair services and the estimated replacement cost should repair not be f…Purchase or Repair: 
...
Show More
Show More
Received an alert for a failure on the OKUMA 1006-0614-63-16 BLII-D100A SERVO DRIVE. Heading over to assess the issue now.
—> Purchase or Repair:
—> Purchase or Repair:
We apologize for the lack of response regarding your Okuma LB15 E4809-770-015-B. We will address the issue
—> Purchase or Repair:
—> Purchase or Repair:
We're experiencing issues with the Servo Velocity Controller Board (Okuma LB15 E4809-770-015-B). The board is failing and affecting the line's production speed. Please address this immediately to ensure minimal downtime.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Okuma LB15 E4809-770-015-B Servo Velocity Controller Board be repaired or purchased? I am looking to
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an Okuma PPS60C E4809-747-005-E board available for sale or repair? Our unit went down and we need to keep production running.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, we are in need of repair information or a replacement for the Servo Velocity Controller Board (part number E4809-770-015-B) for our Okuma LB15. Could you please provide an estimate for repair or guide us on how to source a replacement? Your
—> Purchase or Repair:
—> Purchase or Repair:
To Whom It May Concern : Regarding a OKUMA CNC lathe LR10 Serial # 0107-0044 OSP 5020L-SC control serial # 00139-1.0 . We bought this machine used and in \" as is \" condition . One driver board in the monitor is not working. The OKUMA repair man told us that both of these need to be replaced. Do yo…Purchase or Repair: 
...
Show More
Show More
The monitor on the Okuma 5000 LSC OSP5001.G is malfunctioning, causing delays on the production line. Please address this issue urgently to minimize downtime and resume operations
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with Okuma LB15 E4809-770-015-B Servo Velocity Controller Board. Need this industrial unit repaired
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, I'm reaching out for repair info on an Okuma PPS60C E4809-747-005-E board that's not working. Can you please provide guidance on how we can go about fixing or replacing it quickly? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am interested in purchasing an Okuma LB15 E4809-770-015-B Servo Velocity Controller Board. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Okuma LB15 E4809-770-015-B Servo Velocity Controller Board is not working as reported from the shop.
—> Purchase or Repair:
—> Purchase or Repair:
We have an Okuma 5020L and the glare filter on the screen broke and has been missing for years. Do you know where we can get another one?Thank you
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: