Procond for Service call 1-336-969-0110 at Industrial Electronics Repair

Procond Service & Repair Forum

Hello, do you have a replacement Procond MC-70 124438 drive available for sale or repair? The unit has gone down, and we need to keep production running. Thank you.

—> Purchase or Repair:

— Posted by Bob Wentworth on 2007-04-04

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "Procond"

Procond → Procond EWM 1000 PLUS W1A0DDBF ↗
Procond Elettronica → Procond Elettronica MC-70 124438 ↗
Procond Elettronica → Procond Elettronica MC-70 motor controller ↗
Procond → Procond MC-70 124438 ↗
Procond → Procond MC-70 ↗

If you need your Procond unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 614 Comments

#Procond Elettronica by DAVID MARSH on 2009-11-20 10:11

I have a new GE Procond Elettronica Type P. 451510085 F:5065Type E. 124303975 SW Ver. W2C01551Electrolux Part Number 1321226746This is a new part (never fitted however the box is a bit tatty) it cost well over £100, as the part is of no use to me, would you know where I could sell it for a nominal s…Purchase or Repair:

#Procond by Sakis on 2010-09-11 16:56

Looking for a technician to repair a Procond EWM 1000 Plus W1A0DDBF industrial unit. The unit's board seems to be malfunctioning, possibly affecting its operations. Any help identifying the issue and providing a fix would be appreciated. Thank you.

—> Purchase or Repair:

#Procond Elettronica by SETIABUDI on 2009-11-24 15:23

Electronic Module for washing machineHelloI would like to test this module, i don\'t know if it\'s working wellIs it possible to have a schematic or technical datasheet of this moduleRef = Type Procon :451511360Type E.Z: 13200353/2SW ver USA0020515/00 T70THANKS A LOTBEST REGARDS—> …Purchase or Repair:

#Procond Elettronica by Essak on 2020-09-16 11:38

I have circuit board and R82 resistor blown. How can I repair it? Where to get replacement part. How can I find exact value of resistor? Is it 0.82 ohms or 820 ohms. Please reply soon. I live in Leicester, the U.K. Thank you.

—> Purchase or Repair:

#Procond Elettronica by john cliff on 2006-11-06 13:36

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Urgent repair service needed to resolve the issue

—> Purchase or Repair:

#Procond Elettronica by Dieter Pauwels on 2012-02-28 18:08

Hello GeoffI have the exact same problem. Did you find the answer?Yhx

—> Purchase or Repair:

#Procond Elettronica by Carley on 2006-06-23 05:29

The Procond Elettronica MC-70 124438 treadmill board is not functioning properly, which is halting the production line. Maintenance is urgently required to address this issue and resume operations

—> Purchase or Repair:

#Procond Elettronica by Baron on 2007-09-24 12:06

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, possibly due to a power issue. Looking for a technician to repair the industrial unit

—> Purchase or Repair:

#Procond by Muniz on 2010-03-02 20:31

Hi there, our Procond EWM 1000 Plus W1A0DDBF board has stopped working. We need a replacement. Could you please provide us with repair information? We need a quick response. Thank you!

—> Purchase or Repair:

#Procond Elettronica by Tamadite on 2015-11-04 22:29

Can you please give me the value of component C34 of PCB Procond 3560144029?

—> Purchase or Repair:

#Procond Elettronica by Simon ANDRIANTSOA on 2007-04-04 23:56

The Procond Elettronica MC-70 124438 treadmill board is not working.

—> Purchase or Repair:

#Procond Elettronica by marco azevedo on 2011-05-11 10:42

hi all. if possible give us a schema of procond electronica bord 35600a1139 of washing machine from electrolux ewf 1035 models.all regraetsMarco azevedo

—> Purchase or Repair:

#procond Elettronica by Dees on 2006-06-22 23:29

The treadmill controller on the procond Elettronica MC-70 124438 is malfunctioning, affecting the production line. Urgent repair service needed to resolve issue

—> Purchase or Repair:

#Procond Elettronica by Edy Gerah on 2009-01-17 22:16

> Dear Sir/Madem,>>> I would like to asking you about your product sale .> I\'m looking for the HP 62A .New or other stocks .> Do you sale them ? Can I reguest order to you and internasional delivery> order to Singapore .> Because I have small business/personal.> Hope we can doing business and the f…Purchase or Repair:

#Procond Elettronica by hclm2 on 2006-06-21 08:34

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, affecting the production line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:

#Procond Elettronica by Istvan on 2007-02-08 16:32

The Procond Elettronica MC-70 124438 treadmill controller is displaying error code E-2, preventing the treadmill from function. Kindly advise on immediate troubleshooting steps. Thank you.

—> Purchase or Repair:

#Procond Elettronica by R.M.SHARMA on 2007-09-13 07:54

Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:

#Procond Elettronica by mark on 2007-03-24 03:30

Marco,I had a long conversation with a few people and here is what we have come up with for the MC-70 Board.Now depending on the versionDZ4- is the 24V,50ma,5watt zener ORDZ4A and DZ4B- are 12V,650ma,5watts each in series.DZ1- is 15V, 0.2a,1wattDZ2- is a 3.9V, 20ma, 1/2wattI have replaced them as re…Purchase or Repair:

#Procond by Jay Zhou on 2006-11-30 02:51

Procond mc-70 124438 treadmill controller not turning on.

—> Purchase or Repair:

#Procond Elettronica by ERMETO on 2007-05-14 22:19

The Procond Elettronica MC-70 124438, which serves as the treadmill controller, experienced a malfunction earlier today, causing unexpected downtime from 230 PM to 445 PM. I'm seeking a brief explanation before the next shift comes in. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Rune Møller Hauser on 2019-04-03 20:01

Print number: 3560101029Is mounted in Brandt refrigeratorNormal function in about 8 years, then it start writiing "e" in display, and start bipping. Then I turn the temperature up and down, and then it have normal function again, maybe in 1 hour, sometimes 14 days I think its a´failure in …Purchase or Repair:

#Procond Elettronica by dulce on 2006-01-03 15:57

Procond Elettronica 45220051 675807501 board malfunctioning, affecting production line. Urgent action needed to resolve issue

—> Purchase or Repair:

#Procond Elettronica by RaymondMop on 2018-09-05 04:19

Hello. We invite you to the placement of video from yon the world. Online for Adults

—> Purchase or Repair:

#Procond Elettronica by Quy P Nguyen on 2018-01-03 14:10

Procond 451523906

—> Purchase or Repair:

#Procond Elettronica by jimig on 2008-01-20 19:43

What is the cathode of DZ4 connected to via PWB traces top and bottom?Due to the heat from DZ4\'s overstress is looks like if there was a trace to DZ1- it vaporized.Are the cathodes of DZ1 and DZ4 connected?

—> Purchase or Repair:

#Procond Elettronica by ABDELAZIZ on 2006-12-01 20:16

I am following up on the previous message regarding the Procond Elettronica MC-70 124438 treadmill board. The unit is still down. We need assistance with this matter as soon as possible. Please reply

—> Purchase or Repair:

#Procond Elettronica by Manuel on 2009-05-25 17:30

HelloIm also would like to test this my module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this module*******Waht is the cost for repair? What is the cost for a new one?GE Procond ElettronicaType P. 451510050Type E. 12430392/4SW Ver. W2C01202THAN…Purchase or Repair:

#Procond Elettronica by milenko on 2007-11-01 23:15

The Procond Elettronica MC-70 124438 treadmill controller is showing the error code E2. The treadmill stops functioning abruptly after about 2 minutes of use. This issue is impacting our ability to provide uninterrupted services. Your

—> Purchase or Repair:

#Procond Elettronica by Elimir Iliev on 2010-11-15 19:38

Dear Mrs or MrI\'ve got serios problem! I use a washing machine electrolux but suddenly normaly work stop! I think microprocesor is out! Is it posible to purchace this part from you! Here is details:GE Procond ElectronicaType P. 451510133 F:6437Type E. 132156810SW Ver. W2C01450 50/02—> …Purchase or Repair:

#Procond Elettronica by farid sumawan on 2006-06-20 01:32

Procond Elettronica MC-70 124438 treadmill controller not functioning, slowing down production line. Urgent repair service needed to resolve issue

—> Purchase or Repair:

#Procond Elettronica by Foronda on 2007-10-05 17:05

The Procond Elettronica MC-70 124438 is a treadmill controller. It's currently not working and needs attention from the maintenance team.

—> Purchase or Repair:

#Procond Elettronica by kutsal on 2007-03-24 04:38

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Urgent repair service is needed to resolve this issue

—> Purchase or Repair:

#Procond Elettronica by Usman on 2007-10-03 10:07

The Procond Elettronica MC-70 treadmill controller is displaying error code E2. The treadmill is not responding to speed adjustments and abruptly stops after a few seconds. Looking for immediate assistance to diagnose and resolve the issue.

—> Purchase or Repair:

#Procond Elettronica by Bill Leach on 2006-12-18 07:04

I'm experiencing some issues with the Procond Elettronica MC-70 124438 treadmill board. It seems like something has stopped working, but I'm not exactly sure what the problem is. I would appreciate any assistance or guidance you can provide.

—> Purchase or Repair:

#Procond Elettronica by Lester Duplessis on 2007-06-01 01:50

Treadmill controller Procond Elettronica MC-70 124438 displaying Error Code E5 - Motor Overcurrent Protection triggered.

—> Purchase or Repair:

#Procond Elettronica by henry gutierrez on 2007-12-02 22:58

MORNINGYOUR HAVE PARTS ELETRONIC OF TRADMILL AND BICYCLE UNIVERSAL MUCH MODELS FOR REPAIRTHANK YOUSINCERELYHENRY L.R. GUTIERREZ

—> Purchase or Repair:

#Procond Elettronica by Josephfug on 2022-01-12 00:21

I just want to say thank you for this great forum. I found a solution here on computer-cnc-repair.info for my issue.

—> Purchase or Repair:

#Procond Elettronica by Vasanthkumar on 2007-10-06 14:57

Please provide me with information on the availability of support or replacement parts for the Procond Elettronica MC-70 124438 treadmill controller. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Chuck Berls on 2006-11-04 00:22

The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a production line disruption. Immediate repair service is needed to restore functionality and resume operations

—> Purchase or Repair:

#Procond Elettronica by Rodriguez. on 2006-11-27 14:20

Please provide an update on the status of the repair for my Procond Elettronica MC-70 124438 treadmill board. It is still not functioning, and I require assistance immediately.

—> Purchase or Repair:

#Procond Elettronica by FRANCESCO PARI on 2009-01-14 10:21

Dear Sir In my Ariston dishwasher LSI 41, we have the printed circut, typ: GE Precond Elettronica 356084601. My question is, if i can SEND YOU THIS CIRCUIT TO A CONTROL, CAUSE I DON\'T KNOW IF IT WORKS OR NO, AND HOW MUCH IT COSTS THE CONSIGNMENT + THE JOBWith regardsFRANCESCO

—> Purchase or Repair:

#Procond Elettronica by ennikl on 2013-08-12 11:35

The Procond Elettronica 356033305 47-90 circuit board is displaying Error Code E304 intermittently, preventing the equipment from powering up. Please advise on troubleshooting steps ASAP. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Hassan Sulaiman on 2019-07-30 05:47

Hello,I ve this Procond Elettronica card part no: 12430381/5 356084806 of which its functionality is suspect. How can I get it tested/repair and what's the likely cost if I send it across to you for test/repair?Plse reply via email.Best rgds.

—> Purchase or Repair:

#Procond by Syam on 2006-12-18 04:04

Procond MC-70 124438 treadmill controller displaying error code E1.

—> Purchase or Repair:

#Procond Elettronica by C Westerhof on 2009-10-15 17:16

manual ge procond 356092103

—> Purchase or Repair:

#Procond Elettronica by Tomlinson on 2007-02-02 12:13

The Procond Elettronica MC-70 124438 treadmill controller is displaying an error message "E4" and not responding to commands.

—> Purchase or Repair:

#Procond Elettronica by WILDKATmln on 2022-03-07 20:36

manuscripts held onto

—> Purchase or Repair:

#Procond Elettronica by Ian thomas on 2011-05-19 18:02

Please could I purchase this part number from you 411312431How much Thanks Ian

—> Purchase or Repair:

#Procond by Zahir on 2006-12-18 05:04

Procond MC-70 124438 is not responding, preventing production from continuing.

—> Purchase or Repair:

#Procond Elettronica by Ali Raza on 2006-12-18 06:04

Following up on my previous message regarding the Procond Elettronica MC-70 124438 treadmill board issue. The unit is still non-operational. I expect a

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.