Procond for Service call 1-336-969-0110 at Industrial Electronics Repair

Procond Service & Repair Forum

My client's Procond EWM 1000 Plus W1A0DDBF is having issues with the board. Can you please provide information on repair options and turnaround time? Thank you.

—> Purchase or Repair:

— Posted by Crispin Asumu on 2010-12-20

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "Procond"

Procond → Procond MC-70 124438 ↗
Procond → Procond EWM 1000 PLUS W1A0DDBF ↗
Procond → Procond MC-70 ↗
Procond Elettronica → Procond Elettronica MC-70 124438 ↗
Procond Elettronica → Procond Elettronica MC-70 motor controller ↗

If you need your Procond unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 613 Comments

#Procond Elettronica by Thomas Riis on 2011-11-18 07:29

Hi,We have a defect controller board : \"3560144009\" from Procond Elettronica.It fails by periodically stops the motor and heating elements. It seems that the ignition for the motor is unstable. For me it sounds like it is a moped / motorcycle with a bad ignition :-)Please could you inform me what …Purchase or Repair:

#Procond Elettronica by kellyTag on 2021-12-15 04:05

hello. topic for me thanks kelly

—> Purchase or Repair:

#Procond Elettronica by Bulbon on 2006-12-19 16:01

Hello, I am inquiring about a Procond Elettronica MC-70 124438, which is a treadmill controller. My client is experiencing issues with it and would like more information on repair services available. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Istvan on 2007-02-08 16:32

The Procond Elettronica MC-70 124438 treadmill controller is displaying error code E-2, preventing the treadmill from function. Kindly advise on immediate troubleshooting steps. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Larry Nadler on 2007-01-20 15:40

Got the board back and it works great! Amazing turn around time....you got in on a Friday and I had it back the next Wednesday....Unheard of especially with a check in the box for payment! Did you change anything else besides those 2 Zener diodes to heavier duty components? Thanks again.....Do you w…Purchase or Repair:

#Procond Elettronica by Jaypet on 2020-03-12 20:04

Electrical installation in Kazan

—> Purchase or Repair:

#Procond Elettronica by TAI on 2007-07-12 05:28

Hello, I am reaching out on behalf of my client who has a Procond Elettronica MC-70 124438 treadmill board that needs repair. We have the part number and understand that it's related to the treadmill board. Could you please provide information on repair services available for this specific part? Tha…Purchase or Repair:

#Procond Elettronica by Evangelist on 2007-04-08 00:14

The Procond Elettronica MC-70 124438 treadmill board malfunctioned during the previous shift, causing unexpected downtime. I need a quick response before the next shift begins. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Vladimir Ayala on 2007-10-21 07:14

Looking for someone to repair a Procond Elettronica MC-70 124438 treadmill controller. Not working, need fixing asap.

—> Purchase or Repair:

#Procond Elettronica by Naresh on 2006-12-18 09:04

Looking for someone to repair my Procond Elettronica MC-70 124438 treadmill board. The unit is displaying error messages and not responding to any commands. Need assistance to get it operational again.

—> Purchase or Repair:

#Procond Elettronica by Rajen on 2007-10-21 05:14

Please provide me with more information about the Procond Elettronica MC-70 124438 treadmill controller. We are looking to determine if it is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:

#Procond by McCUISTION on 2006-06-22 10:29

The treadmill board on Procond MC-70 124438 is malfunctioning, causing a halt in production. Urgent repair service is needed to get the production line up and running without further delay.

—> Purchase or Repair:

#Procond Elettronica by A. Redd on 2007-12-22 19:29

Proform 725si (PFTL 72560) board ID 170-0518 rev. 2.Do you have replacement board (new or refurb.)? What is the cost to repair?

—> Purchase or Repair:

#Procond by CrurordVoxy on 2010-09-26 17:44

Board failure on Procond EWM 1000 Plus W1A0DDBF, must replace ASAP.

—> Purchase or Repair:

#Procond Elettronica by Peter CHE NGWA on 2013-05-16 16:54

Could you please confirm if the Procond Elettronica 356033305 47-90 is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:

#Procond Elettronica by Rodriguez. on 2006-11-27 14:20

Please provide an update on the status of the repair for my Procond Elettronica MC-70 124438 treadmill board. It is still not functioning, and I require assistance immediately.

—> Purchase or Repair:

#Procond Elettronica by MALIK RIAZ on 2011-05-18 08:18

I HAVE MC-70 MOTOR CONTROLLER CARD, PLEAS I WANT TO KNOW SOME PARTS VALUES OF THESE LOCATION ,R57,DZ1,DZ4 ITS BURNED WITH OVER VOLTS

—> Purchase or Repair:

#Procond Elettronica by john cliff on 2006-11-06 13:36

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Urgent repair service needed to resolve the issue

—> Purchase or Repair:

#Procond Elettronica by fagus on 2007-02-16 14:19

Hello, I have a Procond Elettronica MC-70 124438 treadmill board that needs replacement or repair. It's an older unit, and we're unsure of the manufacturer. Could you please advise if this model is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:

#Procond Elettronica by Tim Dong on 2011-09-11 15:51

I am in need of the schematic for MC-70 AW.Rev -, Motor Control, P/N: 124438. Apprearantly, Zener diode, DZ1 and diode D10 were damaged. Does anyone know where I can get it? Thank you very much.Best Regards,Tim Dong

—> Purchase or Repair:

#Procond Elettronica by Milan Kumar Sahu on 2007-10-04 15:28

One of the drives or boards in the Procond Elettronica MC-70 124438 treadmill controller just failed. I'll need to take a closer look to diagnose and fix it.

—> Purchase or Repair:

#Procond Elettronica by aro on 2007-05-31 23:50

Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or needs to be replaced? Trying to check this off my to-do list. Thank you!

—> Purchase or Repair:

#Procond Elettronica by Arvi Raud on 2021-10-07 16:50

Hi, I need a display on the Fagor refrigerator 07-0992440circuit board barcode180809506006manufacturerProcond Elettronica

—> Purchase or Repair:

#Procond Elettronica by Clay Wingo/ Farrow Fabricating on 2005-12-29 19:51

The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a halt in the production line. Urgent repair service is required to resume operations without further delay.

—> Purchase or Repair:

#Procond Elettronica by FRANCESCO PARI on 2009-01-14 10:21

Dear Sir In my Ariston dishwasher LSI 41, we have the printed circut, typ: GE Precond Elettronica 356084601. My question is, if i can SEND YOU THIS CIRCUIT TO A CONTROL, CAUSE I DON\'T KNOW IF IT WORKS OR NO, AND HOW MUCH IT COSTS THE CONSIGNMENT + THE JOBWith regardsFRANCESCO

—> Purchase or Repair:

#Procond Elettronica by Vilyamki on 2006-11-16 02:57

Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:

#Procond Elettronica by Mark on 2011-03-15 14:30

Hello,I am search with the condensator HMF 25/100/21C unit.as the delivery terms are for Germany?ThanksBernd Mark

—> Purchase or Repair:

#Procond Elettronica by R.M.SHARMA on 2007-09-13 07:54

Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:

#Procond Elettronica by Flashpaqmzt on 2021-11-18 14:10

elements (case, binding).

—> Purchase or Repair:

#Procond Elettronica by Sergio Dratwa on 2007-11-13 06:23

Elevation motor is working properly, drive motor does not starts.There are 2 diods that are burn: DZ1 and DZ4 (in between the relay and what look like to be 2 ceramic resistors). There is an overheat area on PCB under these diods, but PCB still OK.Would you sell me just the diods?If not, how should …Purchase or Repair:

#Procond Elettronica by WILDKATpvt on 2021-11-22 10:41

Europe, and in Ancient Russia

—> Purchase or Repair:

#Procond Elettronica by Kosiecki on 2007-10-31 03:37

I'm sorry to hear that your Procond Elettronica MC-70 124438 treadmill controller is not functioning properly. It seems like there is an issue with the machine, but I'm uncertain about the exact problem. I recommend contacting a professional technician to diagnose and fix the problem for you.—> …Purchase or Repair:

#Procond Elettronica by Michael Read on 2007-08-13 10:23

I am following up on my previous message regarding the Procond Elettronica MC-70 124438 treadmill board issue. The unit is still non-functional. I need urgent assistance. Please reply

—> Purchase or Repair:

#Procond Elettronica by FRANCOIS on 2012-04-30 18:15

Bonjour,je suis à la recherche d\'un condensateur réf : 411.10.5060GMF 40/100/21sh 0,15µF(X2)+ 2x 0.004µF (Y)2X0,5 mH + 1.5 MQ250 V~ 50/60Hz -10A/40°c46-94CordialementFrancois

—> Purchase or Repair:

#Procond Elettronica by Mitch Gryboski on 2006-06-20 00:32

The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, disrupting our production line. Urgent repair service is needed to get the line back up and running efficiently. Thank you.

—> Purchase or Repair:

#Procond Elettronica by ricard on 2009-09-07 12:00

HelloIm also would like to test this my module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this module*******What is the cost for a new one?GE Procond ElettronicaType P. 451510051Type E. 12430392/5SW Ver. W2C01250

—> Purchase or Repair:

#Procond Elettronica by Bartley on 2013-07-27 08:32

Do you have a replacement Procond Elettronica 356033305 47-90 circuit board available for sale? Our unit is down, and we need it to keep production running. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Gianfranco Manunta on 2007-12-26 18:07

Hi,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 356071101 - LABEL NO 452650111 - FOR Ariston dishwasher LSI 66 A. AND ALSO THE PRICE FOR A TRANSPORTATION TO ITALY.With regards, GIANFRANCO MANUNTA, via M. Macchi 87 - 20124 Milano - ItalyTHANK YOU

—> Purchase or Repair:

#Procond Elettronica by Herbert2Caure on 2022-03-02 08:27

Are you an American who is upon looking notwithstanding exigency loans ? Do you think you clout need to drift compete for a accommodation soon? Are you on tap to drop of engaging normal loans that appear along with a tombola of hassle? Whatever your setting is, we are here to skedaddle! We be underg…Purchase or Repair:

#Procond by auBe on 2010-10-20 03:24

Do you have a Procond EWM 1000 Plus W1A0DDBF board available for repair or purchase? Production is currently down, and we need a replacement urgently. Thank you.

—> Purchase or Repair:

#Procond Elettronica by John McGeady on 2011-03-09 22:12

think we need a new transformer, which has procond eletrrronica written on itcan you assist ?

—> Purchase or Repair:

#Procond Elettronica by abeer allen on 2006-06-10 17:11

The treadmill controller model Procond Elettronica MC-70 124438 is malfunctioning, affecting the treadmill production line. Urgent repair service needed to resolve this issue

—> Purchase or Repair:

#Procond Elettronica by Lebovich on 2006-12-08 20:16

Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Tim Cumings on 2011-10-23 22:15

I have an error code e21 on my treadmill. I found that the speed sensor wire was broken off the screw on the motor attachment. Do you have one and how much is the cost. Thanks

—> Purchase or Repair:

#Procond by Jay Zhou on 2006-11-30 02:51

Procond mc-70 124438 treadmill controller not turning on.

—> Purchase or Repair:

#Procond Elettronica by Burford on 2005-12-30 12:51

The treadmill board on Procond Elettronica MC-70 124438 is malfunctioning, causing a halt in production. Urgent repairs are needed to resume operations immediately.

—> Purchase or Repair:

#Procond Elettronica by Tom Mitchell on 2008-02-19 11:27

Hello, I am a business customer seeking repair service for my Procond Elettronica MC-70 124438 treadmill board. The unit is exhibiting an issue where it fails to power on despite being connected to a power source. I have attempted to reset the unit multiple times without success. Based on initial di…Purchase or Repair:

#Procond Elettronica by Gary Johnson on 2006-06-10 08:11

The control board on the Procond Elettronica MC-70 124438 treadmill line is malfunctioning, resulting in a complete halt of production. Urgent action is required from the repair service to resolve this issue

—> Purchase or Repair:

#Procond Elettronica by Joseph Krug on 2005-11-23 01:08

I received the MC-70 motor controller board back today. It works perfectly, and I wish to thank you for your one-day turn around time and quick return shipping. Your service is better than you advertise, which is unusual and greatly appreciated.Thank You again!!!A very satisfied customer!!—> …Purchase or Repair:

#Procond Elettronica by schepers didier on 2011-08-24 12:31

My module for aeg lavamat 72800 /ge procond type p 451515351-e 132219810,version W1a 30106 19 apr 04.give me please the price to repair or to exchange my module ,en how to proceed.thanks

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.