Procond for Service call 1-336-969-0110 at Industrial Electronics Repair

Procond Service & Repair Forum

Procond EWM 1000 Plus is malfunctioning, affecting the production line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:

— Posted by girish on 2010-12-27

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "Procond"

Procond → Procond MC-70 124438 ↗
Procond Elettronica → Procond Elettronica MC-70 124438 ↗
Procond → Procond EWM 1000 PLUS W1A0DDBF ↗
Procond → Procond MC-70 ↗
Procond Elettronica → Procond Elettronica MC-70 motor controller ↗

If you need your Procond unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 613 Comments

#Procond Elettronica by Joseph on 2007-02-03 22:39

Can you please advise what it would cost to repair a MC-70 board for my Nordic Track treadmill? The power supply board has all the LED\'s lit (the PWM flashes only when it calls for speed). The motor works (I\'ve used a 12 vdc power supply to test). I\'ve also checked to make sure that 120Vac is sup…Purchase or Repair:

#Procond Elettronica by Independentmgc on 2022-03-12 06:19

or their samples written

—> Purchase or Repair:

#Procond Elettronica by János Madarasz on 2008-08-10 18:58

Wellcome!I would like to know conecting up of 356069403 microwave.How can you help me ?Sincerelly János Madarasz

—> Purchase or Repair:

#Procond Elettronica by Jim Cox on 2008-08-22 00:59

Did you find the value for this power resistor? I\'m still looking.

—> Purchase or Repair:

#Procond Elettronica by Tebbutt on 2007-10-04 13:28

I require urgent assistance with the Procond Elettronica MC-70 124438 treadmill controller. The unit is still not functioning, and I need someone to address the issue

—> Purchase or Repair:

#Procond Elettronica by joel on 2012-02-05 11:13

Bonjour je recherche un condensateur procond electronica zem411 13 22 038 OU S H 0.1µF (X2)+2x 0.015µF (Y) +2.2M om250V~ HPF 25/Q85/21RB 24 565-1Cette piece viens d\'une cuisiniére rosière trio ( plaque four lave vaisselle )merci

—> Purchase or Repair:

#Procond Elettronica by FARHAN on 2006-06-22 07:38

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, halting our production line. Please respond urgently to resolve this issue and ensure production is up and running smoothly again.

—> Purchase or Repair:

#Procond Elettronica by domenideshev€Õ on 2007-02-22 02:03

The treadmill controller Procond Elettronica MC-70 124438 is not functioning properly. It is exhibiting unusual behavior that is different from its normal operation.

—> Purchase or Repair:

#Procond by Ferguson on 2014-03-13 00:00

Procond MC-70 124438 drive issue unit not functioning properly, suspect motor or drive controller problem. Need immediate repair assistance.

—> Purchase or Repair:

#Procond Elettronica by Edward Pavlina on 2007-05-14 17:19

Can the Procond Elettronica MC-70 124438 treadmill board be repaired or replaced? I'm looking to check this off my to-do list.

—> Purchase or Repair:

#Procond Elettronica by hamed on 2009-06-17 10:29

Dear Sir, Mam,I have a treadmill icon health & fitness and it is damaged so I open the cover and see the board with this model MC-70 Aw.revPart #124438 damaged .I have a qouestion:Two parts of this board are damaged and I cant read the part number on them.so please let me know the parts number(dz1 a…Purchase or Repair:

#Procond Elettronica by THINH NGUYEN on 2006-02-22 16:57

The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, halting production on the line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:

#Procond Elettronica by roberto arreola on 2008-03-20 02:51

Iwant to now the price in this part

—> Purchase or Repair:

#Procond Elettronica by Bartley on 2013-07-27 08:32

Do you have a replacement Procond Elettronica 356033305 47-90 circuit board available for sale? Our unit is down, and we need it to keep production running. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Randy Engle on 2007-10-24 14:18

Do you have a replacement Procond Elettronica MC-70 124438 treadmill board available for sale or repair? Our unit is down, and we need to keep production running.

—> Purchase or Repair:

#Procond Elettronica by kellyTag on 2021-12-29 15:17

hello. topic for me thanks kelly

—> Purchase or Repair:

#Procond Elettronica by M.Beatriz Silveira MD on 2019-08-11 16:08

procono electtronica part 413 26 016I need this part to fix a machine

—> Purchase or Repair:

#Procond Elettronica by JUGIE on 2019-02-05 19:38

HiI need schematic of this board Procond Elettronica 3560101029thanks

—> Purchase or Repair:

#Procond Elettronica by Tom R on 2005-07-23 14:45

I have a PWM Motor Controller card from a Proform treadmill that seems to be not working. Please email me. Thanks

—> Purchase or Repair:

#Procond Elettronica by Lloyd Anderson on 2006-02-01 17:26

Howdy! I was hoping to find out whether my procond board made to you folks through the mail and if so what the turnaround time might be. thanks, Lloyd

—> Purchase or Repair:

#Procond Elettronica by farid sumawan on 2006-06-20 01:32

Procond Elettronica MC-70 124438 treadmill controller not functioning, slowing down production line. Urgent repair service needed to resolve issue

—> Purchase or Repair:

#Procond Elettronica by Lebovich on 2006-12-08 20:16

Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

#Procond Elettronica by PICARD alexandre on 2010-01-13 22:34

hello , I search this product please:PROCONDELETTRONICA413.2712.00.10ìFthank you

—> Purchase or Repair:

#Procond Elettronica by michael on 2007-06-02 20:05

HelloI would like to test this module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this modulename of washing machine gyzer san gorgo modole number 3 560 332 07

—> Purchase or Repair:

#Procond by girish on 2010-12-27 18:20

Procond EWM 1000 Plus is malfunctioning, affecting the production line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:

#Procond Elettronica by john mckinley on 2007-02-22 00:03

Hi there, I am looking for a replacement Procond Elettronica MC-70 124438 for a treadmill controller. Do you have one available for sale? Thank you.

—> Purchase or Repair:

#Procond Elettronica by milenko on 2007-11-01 23:15

The Procond Elettronica MC-70 124438 treadmill controller is showing the error code E2. The treadmill stops functioning abruptly after about 2 minutes of use. This issue is impacting our ability to provide uninterrupted services. Your

—> Purchase or Repair:

#Procond Elettronica by Mike Holzbauer on 2011-07-02 15:37

How much will it cost to get my circuit board repaired? Where can I send it, how long will it take?

—> Purchase or Repair:

#Procond Elettronica by Fred Santizo on 2006-01-29 05:40

Dear Sir/Madam:I need a device with tree switches. It must create the PWM to control the speed of a treadmill motor controller. One of the switch will turn on/off the treadmill the other two will be use to increase/decrease the speed of the motor or the treadmill. I want to eliminate the console of …Purchase or Repair:

#Procond Elettronica by Faheem on 2007-04-18 14:00

The Procond Elettronica MC-70 124438 treadmill controller is not working as reported by someone in the shop.

—> Purchase or Repair:

#Procond Elettronica by Hermelindo on 2007-08-01 12:49

I am following up regarding my Procond Elettronica MC-70 124438 treadmill controller issue. The unit is still down. I kindly request immediate assistance. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Swaney on 2013-02-11 02:39

The circuit board on the Procond Elettronica 356033305 47-90 is malfunctioning, causing a halt in production. We need immediate attention and repair to resume operations swiftly.

—> Purchase or Repair:

#Procond Elettronica by DAVID MARSH on 2009-11-20 10:11

I have a new GE Procond Elettronica Type P. 451510085 F:5065Type E. 124303975 SW Ver. W2C01551Electrolux Part Number 1321226746This is a new part (never fitted however the box is a bit tatty) it cost well over £100, as the part is of no use to me, would you know where I could sell it for a nominal s…Purchase or Repair:

#Procond Elettronica by Tim Cumings on 2011-10-23 22:15

I have an error code e21 on my treadmill. I found that the speed sensor wire was broken off the screw on the motor attachment. Do you have one and how much is the cost. Thanks

—> Purchase or Repair:

#Procond Elettronica by aleks on 2017-06-25 19:47

Circuit Diagram procond elettronica 3560033089. R68 - ?????

—> Purchase or Repair:

#Procond Elettronica by Hans Keldermans on 2007-03-09 03:48

One of the drives or boards on the Procond Elettronica MC-70 124438 treadmill controller just failed, please check it out ASAP.

—> Purchase or Repair:

#Procond by Suliman Mohammed on 2006-10-14 19:38

The treadmill controllers in our Procond MC-70 124438 machines are frequently malfunctioning, causing significant delays on the production line.urgently need the repair service to address this issue to ensure smooth operation.

—> Purchase or Repair:

#Procond Elettronica by james bryan on 2008-03-20 12:56

we need to t know the replacement cost for this item.Brand:gepruft#vc50er 9pi2004-22-lch3105

—> Purchase or Repair:

#Procond Elettronica by OSA on 2005-08-02 11:13

The Procond Elettronica MC-70 124438 treadmill board is displaying unusual behavior in the warehouse. It is not functioning as expected.

—> Purchase or Repair:

#Procond Elettronica by Ged McDaid on 2008-04-26 22:02

My treadmill seems to wish to go max speed regardless I have tested the potentiometer it is ok/Can you repair the mc-76?Can you supply to the uk?Cheersged

—> Purchase or Repair:

#Procond Elettronica by vdandapani on 2007-08-15 02:10

The Procond Elettronica MC-70 124438 treadmill controller in the warehouse is behaving oddly. It is not functioning as it usually does and seems to have some unusual behavior.

—> Purchase or Repair:

#Procond Elettronica by Simon ANDRIANTSOA on 2007-04-04 23:56

The Procond Elettronica MC-70 124438 treadmill board is not working.

—> Purchase or Repair:

#Procond Elettronica by Renno on 2007-03-15 16:45

Hello, we have a Procond Elettronica MC-70 124438 treadmill controller that needs repair or replacement. Can you provide us with repair information or inform us where to find a replacement part? Thank you for your help.

—> Purchase or Repair:

#Procond Elettronica by Nickolay on 2013-06-27 06:21

Good day.Have you the power board for delonghi coffee machine cod DeLonghi 5232109600, cod Procond Elletronica 3560033089?How much cost and can you send this part for me?

—> Purchase or Repair:

#Procond Elettronica by Tobin on 2007-09-01 09:56

Hello, I am interested in purchasing the Procond Elettronica MC-70 124438 treadmill controller. Could you please provide me with information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

#Procond Elettronica by geoff hards on 2011-07-17 17:00

I have a faulty control board for AEG L74810. The resistor R82 has burnt out. I wish to replace it but I do not know it\'s value. Please can you send me the value and a schematic please?Thank you for your help.Geoff Hards

—> Purchase or Repair:

#Procond Elettronica by Thomas Riis on 2011-11-18 07:29

Hi,We have a defect controller board : \"3560144009\" from Procond Elettronica.It fails by periodically stops the motor and heating elements. It seems that the ignition for the motor is unstable. For me it sounds like it is a moped / motorcycle with a bad ignition :-)Please could you inform me what …Purchase or Repair:

#Procond Elettronica by Declan Farrelly on 2006-12-18 08:04

We are experiencing a major issue with the Procond Elettronica MC-7012 124438 treadmill board. It is malfunctioning and causing a production halt. Immediate repairs are required to resume operations swiftly.

—> Purchase or Repair:

#Procond Elettronica by Dejan Pantelić on 2008-04-17 10:33

Dear Sirs,please send your best offer for following items: GE INDUSTRIAL FILTERS: 1. TYPE RANGER 520-280 2 PC 520 V AC, 50-60Hz, 0345, 280A, 40 degrees C, 82480 high leakage current connect protective earth first 2. TYPE RANGER 520-450 1 PC 520 V Ac, 50-60Hz, 0150, 450A, 40 degrees C, 80447 high lea…Purchase or Repair:

#Procond Elettronica by Giampiero Di Marco on 2005-12-21 07:47

The Procond Elettronica MC-70 motor controller is malfunctioning, causing a halt in production. Please address and rectify the issue urgently to minimize downtime on the line.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.