Procond Elettronica for Service call 1-336-969-0110 at Industrial Electronics Repair

Procond Elettronica Service & Repair Forum

My fridge don't work correctly. Continuesly put a message with E and whistle.The tecnic said me that that isn t a water problem, and he prove the motor and it works good.He said that the problem is is electronic system.I can t find a new electronic base.This base looks good and I m not sure of the problem.Questions:Can I do same prove to confirm the fail.?Which cost have the repartition?The fridge have 9 years and I m not sure If is interesting repair it.Where are you? I have to send the base, who?Thanks

—> Purchase or Repair:

— Posted by Ignasi López on 2019-12-10

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "Procond Elettronica"

Procond Elettronica → Procond Elettronica MC-70 124438 ↗
Procond Elettronica → MC-70 AW Rev - motor controller for Image 10.6Q ↗
Procond Elettronica → Procond Elettronica MC-70 MOTOR CONTROLLER ↗
Procond Elettronica → Procond Elettronica device to create PWM ↗
Procond Elettronica → Procond Elettronica my mc 70 board sent in for repair ↗
Procond Elettronica → Procond Elettronica Procond Elettronica MC-70 Repair-THANKS ↗
Procond Elettronica → AMF Paragon Timer ↗
Procond Elettronica → Procond Elettronica MC-70 141914 ↗
Procond Elettronica → Thanks ↗
Procond Elettronica → Procond Elettronica MC-70 motor controller ↗
Procond Elettronica → MC-70 Motor Controller ↗
Procond Elettronica → MC-70 AW.REV- PART#124438 ↗
Procond Elettronica → Procond Elettronica 45220051 675807501 ↗

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 569 Comments

#Procond Elettronica by M. Boulmier olivier on 2010-08-30 21:51

Dear, I have a electronic card from a electrolux clothes washer , and i think it out of order.Part number : elettronica GE procond 12430381/6 356084806Could you test it and repair for witch prize ? Thanks for your feed back.Best RegardsO. Boulmier

—> Purchase or Repair:

#Procond Elettronica by C Westerhof on 2009-10-15 17:16

manual ge procond 356092103

—> Purchase or Repair:

#Procond Elettronica by ADNAN HRNJIC on 2011-11-23 21:31

Hello,I would like to order part no.411312431 and how much it cost

—> Purchase or Repair:

#Procond Elettronica by Edy Gerah on 2009-01-17 22:16

> Dear Sir/Madem,>>> I would like to asking you about your product sale .> I\'m looking for the HP 62A .New or other stocks .> Do you sale them ? Can I reguest order to you and internasional delivery> order to Singapore .> Because I have small business/personal.> Hope we can doing business and the f…Purchase or Repair:

#Procond Elettronica by E on 2007-10-05 18:05

the Procond Elettronica MC-70 124438 treadmill board on unit X is malfunctioning. Needs attention ASAP. Please check it out first thing in the morning. Thanks!

—> Purchase or Repair:

#Procond Elettronica by Joseph on 2007-02-03 22:39

Can you please advise what it would cost to repair a MC-70 board for my Nordic Track treadmill? The power supply board has all the LED\'s lit (the PWM flashes only when it calls for speed). The motor works (I\'ve used a 12 vdc power supply to test). I\'ve also checked to make sure that 120Vac is sup…Purchase or Repair:

#Procond Elettronica by Independentmgc on 2022-03-12 06:19

or their samples written

—> Purchase or Repair:

#Procond Elettronica by Keith Haufler on 2006-05-19 22:42

I am having trouble with my powertread nordictrack treadmill PT 6.0 and have traced power into the controller. I checked the DC motor by hooking it up to a drill battery and it works fine. What part usually fails on these things? If I need to a replacement, what will it cost? Is it cheaper to send y…Purchase or Repair:

#Procond Elettronica by Andrew Walford on 2008-12-08 19:30

Hi can you gve me a price for the above, cheers

—> Purchase or Repair:

#Procond Elettronica by schepers.didier@gmail.com on 2011-10-07 06:32

module doesnt work,no output

—> Purchase or Repair:

#Procond Elettronica by Gary Diamond on 2012-05-01 06:34

ARE YOU GUYS BUY USED BOARDS PULLED FROM TREADMILLSIF SO HOW MUCH NOT TESTED? OR REPAIRED, UNLESS YOU WANTED THEM REPAIRED

—> Purchase or Repair:

#Procond Elettronica by lou broder on 2008-10-25 19:53

i am getting error message 21. any clue on what is wrong?

—> Purchase or Repair:

#Procond Elettronica by john lotherington on 2010-02-03 02:49

hi i have a amana stainless steel side by side fridge freezer model XRSS687BB.IM AFTER A CIRCUIT BOARD new,reco,or mine tested onboard it has hv international 451011010 ..122544-01------------------------------------amfel V18.hex B590-------------------------------------------GE PROCOND ELETTRONICA …Purchase or Repair:

#Procond Elettronica by paul wasson on 2007-04-21 02:47

The Procond Elettronica MC-70 124438 treadmill controller is not working.

—> Purchase or Repair:

#Procond Elettronica by Sally Chen on 2006-06-22 15:34

The treadmill controller for the Procond Elettronica MC-70 124438 is malfunctioning, impacting production. Urgent attention and repair service are needed to resolve this issue swiftly.

—> Purchase or Repair:

#Procond Elettronica by MEYERS on 2006-11-16 05:57

Experiencing issues with Procond Elettronica MC-70 124438 treadmill board. Need a skilled technician to repair an industrial unit immediately. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Jovan on 2006-06-10 15:11

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, resulting in a complete halt to the production line. Urgent repair service is required to restore operations

—> Purchase or Repair:

#Procond Elettronica by Tim Cumings on 2011-10-23 22:15

I have an error code e21 on my treadmill. I found that the speed sensor wire was broken off the screw on the motor attachment. Do you have one and how much is the cost. Thanks

—> Purchase or Repair:

#Procond Elettronica by Antonin on 2010-09-26 16:44

I have a Damamaged control board for the above washing machine. The procond type number is 3560 987 02.an other reference number is Ge Procond 451513144.I am trying to get information for this board.Can you help ?Thanks in advanceAntonin

—> Purchase or Repair:

#Procond Elettronica by Vitamixxfp on 2022-01-20 00:51

secular brotherhoods of scribes.

—> Purchase or Repair:

#Procond Elettronica by Monzur on 2007-10-10 17:40

The Procond Elettronica MC-70 124438 treadmill controller is not working and needs attention.

—> Purchase or Repair:

#Procond Elettronica by Anas on 2006-12-01 15:16

Hello, we have a Procond Elettronica MC-70 124438 treadmill board that needs a replacement. Could you please provide repair information or suggest where we can find one quickly? Thank you.

—> Purchase or Repair:

#Procond Elettronica by Andrew on 2008-04-01 17:51

Depending on the version you have....DZ2 = 3.9V 1/2Watt (replace with higher wattage)DZ1 = 15V 1 watt (replace with 5 watt)DZ4 = 24V 5 watt-OR-New versions haveDZ4A and DZ4B = 12v 5 watt eachResistor is 1K, I replaced it with a 10Watt wire wound 5%.

—> Purchase or Repair:

#Procond Elettronica by henry gutierrez on 2007-12-02 22:58

MORNINGYOUR HAVE PARTS ELETRONIC OF TRADMILL AND BICYCLE UNIVERSAL MUCH MODELS FOR REPAIRTHANK YOUSINCERELYHENRY L.R. GUTIERREZ

—> Purchase or Repair:

#Procond Elettronica by tamgho kevin on 2012-09-13 08:08

j\'ai besoin de savoir combien coute cette carte

—> Purchase or Repair:

#Procond Elettronica by johnny liu on 2007-10-18 17:42

I need DZ1 and DZ24 diodes. Both appear to be burned. Can I repair them?Thanks,Johnny

—> Purchase or Repair:

#Procond Elettronica by FARHAN on 2006-06-22 07:38

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, halting our production line. Please respond urgently to resolve this issue and ensure production is up and running smoothly again.

—> Purchase or Repair:

#Procond Elettronica by victoria froglia on 2006-06-22 07:34

The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a production line disruption. Urgent repair service is needed to restore operations

—> Purchase or Repair:

#Procond Elettronica by BRIDET on 2013-08-01 17:32

Could you please confirm if the Procond Elettronica 356033305 47-90 circuit board is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:

#Procond Elettronica by Alejandro Gonzalez on 2007-07-24 23:14

The Procond Elettronica MC-70 124438 treadmill controller unit isn't working.

—> Purchase or Repair:

#Procond Elettronica by perez espindola francisco on 2006-11-27 16:20

I'm having trouble with the Procond Elettronica MC-70 124438 treadmill board. Something seems to have stopped working, and I'm not quite sure what the exact issue is. Thank you for your assistance.

—> Purchase or Repair:

#Procond Elettronica by Maliki herman on 2012-12-03 04:30

I need chasis mounted filter type efnf 3,in indonesia maybe semarang..please info to pay,tq

—> Purchase or Repair:

#Procond Elettronica by Ali Raza on 2006-12-18 06:04

Following up on my previous message regarding the Procond Elettronica MC-70 124438 treadmill board issue. The unit is still non-operational. I expect a

—> Purchase or Repair:

#Procond Elettronica by Linda Dwi Safitri on 2005-12-21 10:47

The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, potentially halting production. We need urgent service intervention to rectify the issue swiftly and resume operations

—> Purchase or Repair:

#Procond Elettronica by MBA on 2007-09-16 13:04

The Procond Elettronica MC-70 124438 treadmill controller is displaying an error code "E4" and not responding to any commands.

—> Purchase or Repair:

#Procond Elettronica by Gergõ Mészáros on 2009-06-25 09:24

HelloI would like to enquire the undermentioned washing machine from the available of a component and the data of technical:Procond Elettronika411 625 431kWith thanks :Gergõ

—> Purchase or Repair:

#Procond Elettronica by J. Haag on 2006-09-01 20:58

I have an ICON MC-70 motor controller for an IMAGE 10.8q treadmill (IMTL 19372), serial #K23693147 that requires repair as the controller is not functioning correctly. I believe the ICON part number for this controller is #152004. Do you fix these motor controllers?If so, what is the price range for…Purchase or Repair:

#Procond Elettronica by Seltz on 2006-06-22 17:34

The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a critical halt in production. Urgent repair service needed to resolve issue swiftly and resume operation as soon as possible.

—> Purchase or Repair:

#Procond Elettronica by bratialav on 2013-04-04 06:47

Please for electrical scheme my Esam 3500.THANK YOU...

—> Purchase or Repair:

#Procond Elettronica by Mark on 2011-03-15 14:30

Hello,I am search with the condensator HMF 25/100/21C unit.as the delivery terms are for Germany?ThanksBernd Mark

—> Purchase or Repair:

#Procond Elettronica by Anton knijnenburg on 2007-09-16 10:04

Could you please provide information on whether the Procond Elettronica MC-70 124438 treadmill board is still supported, and if parts are available for replacement or repair?

—> Purchase or Repair:

#Procond Elettronica by Adach on 2007-04-04 18:56

Could you please provide information on the Procond Elettronica MC-70 124438 treadmill controller? We are looking to determine if it is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:

#Procond Elettronica by DIEHL on 2011-03-29 10:45

Hello,Could you tell me the price for the Procond Elettronica Part no 3560061009 ( V16 ) for a refrigerator Vedette RC306.I only need the electronical cartBest RegardsMr DIEHL

—> Purchase or Repair:

#Procond Elettronica by Duanna Jorgensen on 2006-03-30 23:23

I have an AMF 7 day Paragon Timer. It controls my motor on my septic system. The problem is that it seems to run continuous, and I have no book to explain to me how to set the timer. Is there a way to find a manual that will explain this to me? I bought the house, and the system was already in. I ha…Purchase or Repair:

#Procond Elettronica by Daniel Butkievich on 2007-04-03 22:19

The Procond Elettronica MC-70 124438 treadmill controller is not working.

—> Purchase or Repair:

#Procond Elettronica by Swaney on 2013-02-11 02:39

The circuit board on the Procond Elettronica 356033305 47-90 is malfunctioning, causing a halt in production. We need immediate attention and repair to resume operations swiftly.

—> Purchase or Repair:

#Procond Elettronica by Knud Oellgaard on 2019-04-25 20:13

HiWhere can I get a new electronic thermostat print to my Atlas NFS242

—> Purchase or Repair:

#Procond Elettronica by James Kollaja on 2006-06-22 18:29

The treadmill board on the Procond Elettronica MC-7012 124438 is malfunctioning, affecting the production line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:

#Procond Elettronica by james on 2007-11-28 00:56

I replaced DZ1 and DZ4 for my Reebok ACD2 per Mark\'s comment, and it works fine now. Great thanks to Mark\'s info. -james

—> Purchase or Repair:

#Procond Elettronica by Eric Tibbits on 2008-01-05 21:41

I have been having problems adjusting the maximum speed potentiometer for my treadmill. I am not an electrical guy. Could you send me a drawing showing the location of this part so I can fix my treadmill. Thanks

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.