Procond Elettronica Service & Repair Forum

The treadmill board on Procond Elettronica MC-70 124438 is malfunctioning, causing a halt in production. Urgent repairs are needed to resume operations immediately.

—> Purchase or Repair: Ticket Image

— Posted by Burford on 2005-12-30

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 569 Comments

#Procond Elettronica by marcus thomas on 2006-04-21 19:24
What are the type and specs for the Diodes on this Controller board? They are located in the DZ1 and DZ4 positions. Also, is the resistor that is located ajacent to these Diodes the best size? if not what do you recommend?

—> Purchase or Repair:
#Procond Elettronica by sarwar alam on 2006-06-10 21:11
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, leading to a disruption in the production line. We need immediate repair service to address this issue and resume operations swiftly.

—> Purchase or Repair:
My dishwasher Ariston LSI 61 E has broken down.Please How Much cost the board sended to Italy in Reggio Calabria.Thanks

—> Purchase or Repair:
#Procond Elettronica by Jaypet on 2020-03-12 20:04
Electrical installation in Kazan

—> Purchase or Repair:
#Procond Elettronica by E on 2007-10-05 18:05
the Procond Elettronica MC-70 124438 treadmill board on unit X is malfunctioning. Needs attention ASAP. Please check it out first thing in the morning. Thanks!

—> Purchase or Repair:
#Procond Elettronica by ScottSak on 2005-12-28 05:12
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a disruption in our production line. We need immediate repair service to address this issue

—> Purchase or Repair:
#Procond Elettronica by DeBauche on 2005-12-30 06:51
The Procond Elettronica MC-70 124438 treadmill board is experiencing intermittent power failures, causing production downtime. Urgent repair service needed to ensure continuous operation.

—> Purchase or Repair:
#Procond Elettronica by OSA on 2005-08-02 11:13
The Procond Elettronica MC-70 124438 treadmill board is displaying unusual behavior in the warehouse. It is not functioning as expected.

—> Purchase or Repair:
#Procond Elettronica by geoff hards on 2011-07-17 17:00
I have a faulty control board for AEG L74810. The resistor R82 has burnt out. I wish to replace it but I do not know it\'s value. Please can you send me the value and a schematic please?Thank you for your help.Geoff Hards

—> Purchase or Repair:
#Procond Elettronica by Eric Tibbits on 2008-01-05 21:41
I have been having problems adjusting the maximum speed potentiometer for my treadmill. I am not an electrical guy. Could you send me a drawing showing the location of this part so I can fix my treadmill. Thanks

—> Purchase or Repair:
#Procond Elettronica by Michael Read on 2007-08-13 10:23
I am following up on my previous message regarding the Procond Elettronica MC-70 124438 treadmill board issue. The unit is still non-functional. I need urgent assistance. Please reply

—> Purchase or Repair:
#Procond Elettronica by ian pierce on 2011-12-03 11:25
have you got one of these and how much please many thanks i pierce

—> Purchase or Repair:
#Procond Elettronica by Arvi Raud on 2021-10-07 16:50
Hi, I need a display on the Fagor refrigerator 07-0992440circuit board barcode180809506006manufacturerProcond Elettronica

—> Purchase or Repair:
#Procond Elettronica by Tom Mitchell on 2008-02-19 11:27
Hello, I am a business customer seeking repair service for my Procond Elettronica MC-70 124438 treadmill board. The unit is exhibiting an issue where it fails to power on despite being connected to a power source. I have attempted to reset the unit multiple times without success. Based on initial di…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Samuel Garcia on 2006-11-16 08:57
Could you please confirm if the Procond Elettronica MC-70 124438 treadmill controller is still supported or if replacement parts are available? The team is looking for repair options but isn't certain about its manufacturer. Thank you.

—> Purchase or Repair:
#Procond Elettronica by James Kollaja on 2006-06-22 18:29
The treadmill board on the Procond Elettronica MC-7012 124438 is malfunctioning, affecting the production line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:
NEED BOARD MACHINE INSTALLED IN A CARRIER AIR CONDITIONER BRAND MODEL:GE ELECTRONIC PROCOND 356,068,908.YOU CAN DELIVER IN THE U.S. EVEN VIA FEDEX?OUR CUSTOMER WILL BE IN THE USA next week.PLS WAIT RETURN.CLÓVIS HIROSHI KUNII

—> Purchase or Repair:
#Procond Elettronica by DIEHL on 2011-03-29 10:45
Hello,Could you tell me the price for the Procond Elettronica Part no 3560061009 ( V16 ) for a refrigerator Vedette RC306.I only need the electronical cartBest RegardsMr DIEHL

—> Purchase or Repair:
#Procond Elettronica by randon on 2007-08-09 13:55
HelloI would like to test this module, i don\'t know if it\'s working wellIs it possible to have a schematic or technical datasheet of this moduleRef = Type P:451510073 Type E: 12430382/1WL401009THANKS A LOTBEST REGARDS

—> Purchase or Repair:
#Procond Elettronica by SCHROETTER on 2011-04-01 16:10
Hello,Could you tell me the price for the Procond Elettronica Part no 3560066303 for a congelator SIEMENS .I only need the electronical cart .I am also ready to do a standard exchange if possible . Best RegardsMr SCHROETTER

—> Purchase or Repair:
#Procond Elettronica by HURTADO Alain on 2019-05-09 15:31
Bonjour je cherche une carte GE Pocond ElecttronicaType P. 451510133 F : 6154Type E. 132156810SW Ver. W2C01450. 50/02Pourriez-vous m'indiquer comment puis- je en acheter une ou faire réparer la mienne ?

—> Purchase or Repair:
#Procond Elettronica by Dieter Pauwels on 2012-02-28 18:08
Hello GeoffI have the exact same problem. Did you find the answer?Yhx

—> Purchase or Repair:
#Procond Elettronica by Tim Dong on 2011-09-11 15:51
I am in need of the schematic for MC-70 AW.Rev -, Motor Control, P/N: 124438. Apprearantly, Zener diode, DZ1 and diode D10 were damaged. Does anyone know where I can get it? Thank you very much.Best Regards,Tim Dong

—> Purchase or Repair:
#Procond Elettronica by Milan Kumar Sahu on 2007-10-04 15:28
One of the drives or boards in the Procond Elettronica MC-70 124438 treadmill controller just failed. I'll need to take a closer look to diagnose and fix it.

—> Purchase or Repair:
#Procond Elettronica by Datexpro on 2007-07-19 19:25
The Procond Elettronica MC-70 124438 treadmill controller unit is not working.

—> Purchase or Repair:
#Procond Elettronica by Beattie on 2007-05-03 00:25
I noticed that the Procond Elettronica MC-70 124438 treadmill controller seems to be malfunctioning. It appears that something has stopped working, but I would recommend having it checked by a professional for a proper diagnosis and repair.

—> Purchase or Repair:
#Procond Elettronica by Lester Duplessis on 2007-06-01 01:50
Treadmill controller Procond Elettronica MC-70 124438 displaying Error Code E5 - Motor Overcurrent Protection triggered.

—> Purchase or Repair:
#Procond Elettronica by james on 2007-11-28 00:56
I replaced DZ1 and DZ4 for my Reebok ACD2 per Mark\'s comment, and it works fine now. Great thanks to Mark\'s info. -james

—> Purchase or Repair:
#Procond Elettronica by RainMachinezda on 2022-02-06 00:31
(palimpsests). In the XIII-XV centuries in

—> Purchase or Repair:
#Procond Elettronica by Marilyn on 2006-01-03 01:57
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Immediate repair service is needed to get the line moving again swiftly.

—> Purchase or Repair:
#Procond Elettronica by Meyer on 2007-03-18 05:05
Hello, I'm inquiring about the pricing and availability of the Procond Elettronica MC-70 124438 treadmill controller. I'm looking to source one quickly and wanted to confirm if this is the correct model. Thank you!

—> Purchase or Repair:
#Procond Elettronica by Ruben Sousa on 2012-12-15 21:17
Hi there.I want to ask if you have this part supply on stock?!The reference is 132400 / 413 26 005.If you do, just tell me how much is the price in total with shipping to Portugal.Thank you very much.

—> Purchase or Repair:
#Procond Elettronica by Kazmarcik on 2011-10-25 17:32
Ich benötige eine neue Elektronik

—> Purchase or Repair:
#Procond Elettronica by Peter Hancock on 2010-12-18 19:07
Hi,Please quote your repair, exchange or refurbished unit prices for Procond Elettronica controller PN 141877 used in a Proform 830 treadmill.Thanks,Peter

—> Purchase or Repair:
#Procond Elettronica by TC on 2013-07-27 13:32
I'm currently experiencing difficulties with the Procond Elettronica 356033305 47-90 machine. It appears to be a circuit board issue, which has caused the machine to stop functioning as expected. I'll do my best to find a solution for this problem.

—> Purchase or Repair:
#Procond Elettronica by Ray Hazard on 2006-11-08 10:57
The treadmill controller (Procond Elettronica MC-70 124438) is malfunctioning, causing a halt in production. Urgent repair service is required to resume operations immediately.

—> Purchase or Repair:
#Procond Elettronica by Michael Cain on 2005-05-27 01:36
The unit with serial number Procond Elettronica MC-70 124438, which seems to be the treadmill board, is exhibiting abnormal behavior in the warehouse. The unit is not functioning as expected and is acting unusually.

—> Purchase or Repair:
#Procond Elettronica by freddy on 2009-01-30 03:07
Tengo problema con mi treadmill. aparece en la pantalla E2 lo que no permite que funcione mi treamill. Que debo hacer, por favcor ayudenme.gracias. espero su respuesta

—> Purchase or Repair:
#Procond Elettronica by ERMETO on 2007-05-14 22:19
The Procond Elettronica MC-70 124438, which serves as the treadmill controller, experienced a malfunction earlier today, causing unexpected downtime from 230 PM to 445 PM. I'm seeking a brief explanation before the next shift comes in. Thank you.

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 is a treadmill controller that is currently not working.

—> Purchase or Repair:
#Procond Elettronica by victoria froglia on 2006-06-22 07:34
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a production line disruption. Urgent repair service is needed to restore operations

—> Purchase or Repair:
#Procond Elettronica by Robin Cooper on 2007-03-09 04:48
The Procond Elettronica MC-70 124438 is a treadmill controller unit that is not functioning properly.

—> Purchase or Repair:
My dishwasher Ariston LSI 61 E has broken down.Please How Much cost the board sended to Italy in caserta.Thanks

—> Purchase or Repair:
#Procond Elettronica by mr m ibrar on 2013-11-18 12:09
The red light is all the time flashing, when the the compressor first comes on it stays on for good 5-10 min and goes to standby and then when it comes back on after a while it stays on for round about 3 min and there about . The supper freeze dose not come on as well, so i will be very great full i…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Paul Brain on 2006-12-05 10:31
I have a Damamaged control board for the above washing machine. The procond type number is 3560 041 10 AI am trying to get hold of the circuit information for this board.Can you help ?

—> Purchase or Repair:
#Procond Elettronica by Jimmy Paragh on 2008-11-11 12:02
Hello , please send me the prize of the controll board Procond Electtronica Type Procond 451513003 Type E.Z. 132120000 SW Ver. W1D00109 07/03 I have been around to ask on several places here in Holland and found that the prize that i have to pay here is so high that if you put a € 100 on top of the …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by W.P.Premaratne on 2006-06-20 13:32
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a significant disruption to the production line. Urgent repair service intervention is required to restore operations

—> Purchase or Repair:
#Procond Elettronica by Juicerxnh on 2021-12-02 03:52
Libraries of the Carolingian era). IN

—> Purchase or Repair:
#Procond Elettronica by vdandapani on 2007-08-15 02:10
The Procond Elettronica MC-70 124438 treadmill controller in the warehouse is behaving oddly. It is not functioning as it usually does and seems to have some unusual behavior.

—> Purchase or Repair:
#Procond Elettronica by Voss on 2007-08-25 03:05
Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. I would like to inquire about the pricing and availability of this unit. I am looking to source one quickly. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.