Procond Elettronica Service & Repair Forum

Hello, we have a Procond Elettronica MC-70 124438 treadmill controller that needs repair or replacement. Can you provide us with repair information or inform us where to find a replacement part? Thank you for your help.

—> Purchase or Repair: Ticket Image

— Posted by Renno on 2007-03-15

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 570 Comments

#Procond Elettronica by Joseph on 2007-02-03 22:39
Can you please advise what it would cost to repair a MC-70 board for my Nordic Track treadmill? The power supply board has all the LED\'s lit (the PWM flashes only when it calls for speed). The motor works (I\'ve used a 12 vdc power supply to test). I\'ve also checked to make sure that 120Vac is sup…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Joseph Krug on 2005-11-23 01:08
I received the MC-70 motor controller board back today. It works perfectly, and I wish to thank you for your one-day turn around time and quick return shipping. Your service is better than you advertise, which is unusual and greatly appreciated.Thank You again!!!A very satisfied customer!!—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Roger on 2007-09-19 18:55
The Procond Elettronica MC-70 124438 treadmill controller is displaying error code E2, indicating a possible issue with the speed sensor. Treadmill is not responding to speed adjustments and stops abruptly. Assistance needed to diagnose and rectify the problem

—> Purchase or Repair:
#Procond Elettronica by ThomasFum on 2022-01-04 10:17
An firm intimate property and greatly ready treatment in behalf of Covid would be a significant breakthrough as a remedy for managing the pandemic, but two antivirals recently authorized in the US explore up with some eloquent caveats, including ungentlemanlike gear up and incident single to each th…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by TAI on 2007-07-12 05:28
Hello, I am reaching out on behalf of my client who has a Procond Elettronica MC-70 124438 treadmill board that needs repair. We have the part number and understand that it's related to the treadmill board. Could you please provide information on repair services available for this specific part? Tha…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by dulce on 2006-01-03 15:57
Procond Elettronica 45220051 675807501 board malfunctioning, affecting production line. Urgent action needed to resolve issue

—> Purchase or Repair:
#Procond Elettronica by Sebastian Voss on 2007-03-27 16:08
Hello,I have a refrigerator and inside ist a plateType Procond 452747163 sw NGBF0A1L242523719 ERF2000P-01.D 220/240V 50Hz - ERF2000PBon this plate is the part, which ist marked with \"T1\" (a transformator)broken.Can you sell it to me, and what is the price.ThanksSebastian Voss—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by david conley on 2011-12-30 23:42
AEC Electrolux fridge freezer circuit board has burnt out part no GE ITA:452707180 sw NFBFOA24 :20/054225. can you advise cost of replacement and delivery time please.

—> Purchase or Repair:
#Procond Elettronica by Matthias on 2007-08-25 10:29
Dear Sir In our Ariston dishwasher LSI 62 A, we have the printed circut, typ: GE Precond Elettronica 356084601. My question is, if we can get this part checked or buyed in Germany?With regardsMatthias

—> Purchase or Repair:
#Procond Elettronica by Charles Ray on 2008-05-28 13:34
I have a sears treadmill with mc-70 motor controller #124438 that has shorted diodes. I would like to have a price on repairs or replacement.Thanks Charles

—> Purchase or Repair:
#Procond Elettronica by Marco Gualengi on 2007-07-19 20:25
Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am trying to source one quickly. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Boczek on 2006-06-19 20:32
The control panel on the Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a halt in production. Repairs are urgently needed to get the line running smoothly again.

—> Purchase or Repair:
#Procond Elettronica by David Phillips on 2005-12-29 23:51
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, halting production. Urgent repair service needed to restore operations

—> Purchase or Repair:
#Procond Elettronica by Tom on 2025-04-16 23:53
seeking repair service for my Procond Elettronica MC-70

—> Purchase or Repair:
#Procond Elettronica by Dean Kralle on 2007-09-26 16:32
The Procond Elettronica MC-70 124438 treadmill controller unit is exhibiting unusual behavior during operation.

—> Purchase or Repair:
#Procond Elettronica by Phill Goldsmith on 2006-06-03 18:22
The treadmill board on the Procond Elettronica MC-70 124438 is malfunctioning, disrupting the production line. Urgent repair service is needed to restore operations

—> Purchase or Repair:
#Procond Elettronica by Gerry Miller on 2006-12-24 04:00
Hello, do you have a Procond Elettronica 452200190 KK88102678 board available for sale or repair? Our unit is down, and we need to keep production running. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Ir Juli Sinaga on 2006-06-22 00:34
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, affecting the production line. Immediate repair service is required to restore operations.

—> Purchase or Repair:
#Procond Elettronica by reza ramezani on 2013-03-30 07:57
The Procond Elettronica 356033305 47-90 circuit board is not working.

—> Purchase or Repair:
#Procond Elettronica by Tuul on 2006-06-10 09:11
The treadmill controller (Procond Elettronica MC-70 124438) is malfunctioning, causing a halt in production. Immediate repair service is required to get the line moving again swiftly.

—> Purchase or Repair:
Do you have a Procond Elettronica power supply BF-PO67800-000 132022 available for repair or purchase? Our production is currently halted, and we need to get it running as soon as possible. Thank you.

—> Purchase or Repair:
#Procond Elettronica by aro on 2007-05-31 23:50
Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or needs to be replaced? Trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
The Procond Elettronica MC-70 motor controller is malfunctioning, causing a halt in production. Please address and rectify the issue urgently to minimize downtime on the line.

—> Purchase or Repair:
#Procond Elettronica by Orlando on 2009-04-28 17:53
i need schematic diagram for control board MC-70 AW P/n124438 or

—> Purchase or Repair:
#Procond Elettronica by RainMachinezda on 2022-02-06 00:31
(palimpsests). In the XIII-XV centuries in

—> Purchase or Repair:
My dishwasher Ariston LSI 61 E has broken down.Please How Much cost the board sended to Italy in caserta.Thanks

—> Purchase or Repair:
#Procond Elettronica by Shree kumar jha on 2007-02-05 10:14
The Procond Elettronica MC-70 124438 treadmill controller is not working.

—> Purchase or Repair:
#Procond Elettronica by Ramiro Ruas on 2007-09-18 14:18
The Procond Elettronica MC-70 124438 treadmill controller is displaying error code E4, indicating a motor speed sensor malfunction.

—> Purchase or Repair:
#Procond Elettronica by Garminzwfm on 2022-02-23 00:26
ancient and medieval Latin,

—> Purchase or Repair:
#Procond Elettronica by Danton Grube on 2005-12-08 05:52
The Procond Elettronica MC-70 124438 treadmill board is displaying abnormal behavior.

—> Purchase or Repair:
#Procond Elettronica by richard K blotz on 2013-08-17 22:32
The Procond Elettronica 356033305 47-90 circuit board is not powering on and causing production downtime.

—> Purchase or Repair:
#Procond Elettronica by Dieter Pauwels on 2012-02-28 18:08
Hello GeoffI have the exact same problem. Did you find the answer?Yhx

—> Purchase or Repair:
#Procond Elettronica by salvador nava on 2013-08-07 11:32
The Procond Elettronica 356033305 47-90 circuit board is not working.

—> Purchase or Repair:
#Procond Elettronica by PatrickvoB on 2022-05-19 20:44
An injury that renders a person handicapped and prohibits them from returning to work for a lengthy period of time is known as a long-term disability. Long-term disability lawyers in Brampton can offer you peace of mind and support during this difficult time.

—> Purchase or Repair:
#Procond Elettronica by javid on 2007-09-19 00:05
Hello, I am reaching out on behalf of a client who is experiencing issues with a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide more information on troubleshooting steps or potential repair options? Thank you.

—> Purchase or Repair:
#Procond Elettronica by MARTIN Alain on 2007-09-09 14:48
HelloIs it possible to have a schematic or technical datasheet of this module :Type P 451510061 F:6210Type E 12430392/7SW ver W2C013T2 31/01BEST REGARDS

—> Purchase or Repair:
#Procond Elettronica by GANESH PM on 2007-10-25 04:50
We experienced downtime with the Procond Elettronica MC-70 124438 treadmill board earlier today during the morning shift. Can you provide some insights on what may have caused the issue? Thank you!

—> Purchase or Repair:
#Procond Elettronica by Ilijanich on 2007-09-01 10:56
The Procond Elettronica MC-70 124438 treadmill controller is displaying error code E2, indicating a motor speed sensor problem.

—> Purchase or Repair:
Hi,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 356071101 - LABEL NO 452650111 - FOR Ariston dishwasher LSI 66 A. AND ALSO THE PRICE FOR A TRANSPORTATION TO ITALY.With regards, GIANFRANCO MANUNTA, via M. Macchi 87 - 20124 Milano - ItalyTHANK YOU

—> Purchase or Repair:
#Procond Elettronica by Watkins on 2007-09-13 03:54
The Procond Elettronica MC-70 124438 treadmill board is not working as reported.

—> Purchase or Repair:
#Procond Elettronica by GiBlobado on 2022-01-03 11:17
kwatery augustow www.noclegi-pracownicze-augustow.online stx21

—> Purchase or Repair:
#Procond Elettronica by bratialav on 2013-04-04 06:47
Please for electrical scheme my Esam 3500.THANK YOU...

—> Purchase or Repair:
#Procond Elettronica by Juicerxnh on 2021-12-02 03:52
Libraries of the Carolingian era). IN

—> Purchase or Repair:
#Procond Elettronica by Sonny Ta on 2006-03-05 20:13
I need to find out what is the repair or replacement cost for this part , part # 124438, and the turn around time if I send it in. What is the best way to send in the part for repair ?orIf I decide to buy the part, how much would it cost ? Include shipping and Handling .Thanks.Sonny—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by nguyentanvu on 2006-06-21 02:34
Procond Elettronica MC-70 124438 treadmill controller experiencing frequent power fluctuations, affecting production line efficiency. Urgent repair service needed to resolve issue

—> Purchase or Repair:
#Procond Elettronica by Tobin on 2007-09-01 09:56
Hello, I am interested in purchasing the Procond Elettronica MC-70 124438 treadmill controller. Could you please provide me with information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Procond Elettronica by BIKOE on 2007-02-08 21:32
The Procond Elettronica MC-70 124438 treadmill controller is displaying error code E2 signaling a motor issue. Treadmill stops abruptly during use. Need immediate assistance to diagnose and fix the problem.

—> Purchase or Repair:
#Procond Elettronica by jeff on 2008-06-01 16:43
anyone know the values of dz2 and dz4luserjeff@yahoo.com

—> Purchase or Repair:
#Procond Elettronica by luth on 2007-07-04 15:33
I am reaching out on behalf of a client who needs assistance with a Procond Elettronica 453160320 141914 treadmill controller. Can you please provide information about potential repairs or replacements for this part? Thank you.

—> Purchase or Repair:
#Procond Elettronica by Edy Gerah on 2009-01-17 22:16
> Dear Sir/Madem,>>> I would like to asking you about your product sale .> I\'m looking for the HP 62A .New or other stocks .> Do you sale them ? Can I reguest order to you and internasional delivery> order to Singapore .> Because I have small business/personal.> Hope we can doing business and the f…Purchase or Repair: Ticket Image...
Show More

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.