Procond Elettronica Service & Repair Forum

Dear Sir, Mam,I have a treadmill icon health & fitness and it is damaged so I open the cover and see the board with this model MC-70 Aw.revPart #124438 damaged .I have a qouestion:Two parts of this board are damaged and I cant read the part number on them.so please let me know the parts number(dz1 and dz4) or send me electrical drawingthanks and best regardshamed

—> Purchase or Repair: Ticket Image

— Posted by hamed on 2009-06-17

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 569 Comments

#Procond Elettronica by Richard Montalvo on 2011-05-11 15:54
I need DZ1 and DZ24 diodes. Both appear to be burned. Can I repair them? Thanks.

—> Purchase or Repair:
#Procond Elettronica by ronnie byrne on 2013-03-12 21:20
hi i am looking for card for zanussi zwn 1220w washing mc procond ecettronica type procond 451516703type assembly 132191513type e board 124307062sw vwr uda30202t70 wk 48/08

—> Purchase or Repair:
#Procond Elettronica by FRANCOIS on 2012-04-30 18:15
Bonjour,je suis à la recherche d\'un condensateur réf : 411.10.5060GMF 40/100/21sh 0,15µF(X2)+ 2x 0.004µF (Y)2X0,5 mH + 1.5 MQ250 V~ 50/60Hz -10A/40°c46-94CordialementFrancois

—> Purchase or Repair:
#Procond Elettronica by CHIRPpdm on 2022-01-27 01:09
antiquities. These are the Egyptian papyri

—> Purchase or Repair:
#Procond Elettronica by lazkano on 2007-10-21 04:14
The Procond Elettronica MC-70 124438 treadmill controller on unit XYZ malfunctioned mid-shift. Please check and troubleshoot during the day shift.

—> Purchase or Repair:
#Procond Elettronica by Declan Farrelly on 2006-12-18 08:04
We are experiencing a major issue with the Procond Elettronica MC-7012 124438 treadmill board. It is malfunctioning and causing a production halt. Immediate repairs are required to resume operations swiftly.

—> Purchase or Repair:
Hello, we are seeking repair information for a Procond Elettronica MC-70 124438 treadmill board. Could you please provide repair details or assist in locating a replacement part? Thank you.

—> Purchase or Repair:
#Procond Elettronica by Niels Sylvest on 2020-09-04 14:35
I have a printcard it is mounted in AEG Electrolux Lavatherm TN95670is it possible to repair, so that machine can be used again, there is no light in the panel at all, and the repair man told me that the failure is in the computer/print.please inform me adress for repair of the card in Denmark—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Dorothy on 2007-05-14 19:19
I have a Procond Elettronica MC-70 124438 treadmill controller that needs repair. The treadmill is not responding when turned on. Looking for a qualified technician to fix it as soon as possible.

—> Purchase or Repair:
#Procond Elettronica by marcus thomas on 2006-04-21 19:24
What are the type and specs for the Diodes on this Controller board? They are located in the DZ1 and DZ4 positions. Also, is the resistor that is located ajacent to these Diodes the best size? if not what do you recommend?

—> Purchase or Repair:
#Procond Elettronica by Locke on 2005-09-22 23:37
The unit that appears to be causing trouble is the treadmill board within the Procond Elettronica MC-70 124438 equipment. It is behaving unusually and not functioning as it typically does.

—> Purchase or Repair:
#Procond Elettronica by Sebastian Voss on 2007-03-27 16:08
Hello,I have a refrigerator and inside ist a plateType Procond 452747163 sw NGBF0A1L242523719 ERF2000P-01.D 220/240V 50Hz - ERF2000PBon this plate is the part, which ist marked with \"T1\" (a transformator)broken.Can you sell it to me, and what is the price.ThanksSebastian Voss—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by mark on 2007-03-24 03:30
Marco,I had a long conversation with a few people and here is what we have come up with for the MC-70 Board.Now depending on the versionDZ4- is the 24V,50ma,5watt zener ORDZ4A and DZ4B- are 12V,650ma,5watts each in series.DZ1- is 15V, 0.2a,1wattDZ2- is a 3.9V, 20ma, 1/2wattI have replaced them as re…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Ullmann on 2007-04-04 13:56
Looking for repair on Procond Elettronica MC-70 124438 treadmill controller. Not functioning properly, need technical expertise to diagnose and fix the issue. Any recommendations for specialized repair services appreciated.

—> Purchase or Repair:
#Procond Elettronica by Matthias on 2007-08-25 10:29
Dear Sir In our Ariston dishwasher LSI 62 A, we have the printed circut, typ: GE Precond Elettronica 356084601. My question is, if we can get this part checked or buyed in Germany?With regardsMatthias

—> Purchase or Repair:
#Procond Elettronica by Patrick séguy on 2012-04-14 12:34
Bonjour,je suis à la recherche d\'un condensateur réf : 411122430sh 0,047µF(X2)+0,68Mhome2X0,025µF(Y2)+2X1mH250 V~50/60Hz -10A/40°cHMF 25/100/21CEn avez-vous en stock?CordialementPatrick

—> Purchase or Repair:
#Procond Elettronica by Herberttep on 2021-11-25 06:17
economic crisis in pakistan essay 2020

—> Purchase or Repair:
#Procond Elettronica by Michael Cain on 2005-05-27 01:36
The unit with serial number Procond Elettronica MC-70 124438, which seems to be the treadmill board, is exhibiting abnormal behavior in the warehouse. The unit is not functioning as expected and is acting unusually.

—> Purchase or Repair:
I need a value for R57 &wattage rating on the above mc-70 pcb.

—> Purchase or Repair:
#Procond Elettronica by Frelka on 2007-05-23 02:29
I'm experiencing some issues with the Procond Elettronica MC-70 124438 treadmill controller. The machine seems to have stopped working correctly, and I'm not entirely sure why. It may require further inspection to determine the exact problem.

—> Purchase or Repair:
I have a faulty board for the aeg 64811.pcb inside : 3560041139.Component D11 is broken, can you tell me the type please.

—> Purchase or Repair:
#Procond Elettronica by Tamadite on 2015-11-04 22:29
Can you please give me the value of component C34 of PCB Procond 3560144029?

—> Purchase or Repair:
#Procond Elettronica by de on 2006-06-03 19:22
The Procond Elettronica MC-70 124438 treadmill controller board is malfunctioning, causing a complete stoppage of the production line. Urgent repair service is required to rectify this issue

—> Purchase or Repair:
#Procond Elettronica by Gerald Harman on 2009-07-23 16:55
Please repair and tesT under load for satisfactory operation. Believe burn out at DZ1, dz4a, dz4b LOCATION ON BOARD.

—> Purchase or Repair:
#Procond Elettronica by Mount on 2006-11-08 18:57
The treadmill controller on the Procond Elettronica MC-70 124438 is malfunctioning, disrupting the production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#Procond Elettronica by faiyaz husain on 2007-02-02 13:13
Do you have a replacement Procond Elettronica MC-70 124438 treadmill controller available? We need it urgently to keep production running smoothly.

—> Purchase or Repair:
#Procond Elettronica by Peter Hancock on 2010-12-18 19:07
Hi,Please quote your repair, exchange or refurbished unit prices for Procond Elettronica controller PN 141877 used in a Proform 830 treadmill.Thanks,Peter

—> Purchase or Repair:
#Procond Elettronica by Joseph Buhagiar on 2012-09-30 14:51
I would like to enquire the cost of a repair or purchase of a new control card for an AEG lavamat silent system plus 74650. The number on the control card is Procond elettronica 3560132009.Thanks and regards,Joseph

—> Purchase or Repair:
#Procond Elettronica by George Katinios on 2013-03-09 08:52
Dear Sirs,Is it possible to tell me the value of R82 resistor or send me the electronic schematics? Thank you in advance,Best wishesGeorge.

—> Purchase or Repair:
#Procond Elettronica by PatrickvoB on 2022-05-19 20:44
An injury that renders a person handicapped and prohibits them from returning to work for a lengthy period of time is known as a long-term disability. Long-term disability lawyers in Brampton can offer you peace of mind and support during this difficult time.

—> Purchase or Repair:
#Procond Elettronica by Claude Coronado on 2007-04-24 20:20
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing delays in production. Please expedite repairs to minimize downtime on the line.

—> Purchase or Repair:
#Procond Elettronica by salvatore rassu on 2010-10-20 15:21
Hi,Got a zanussi jet system 1400 xc and i am looking for the electronic board 45151005112430381/5If you have this part ? How much with the shipping to the uk?Looking to speak to you.RegardsSalvatore

—> Purchase or Repair:
Print number: 3560101029Is mounted in Brandt refrigeratorNormal function in about 8 years, then it start writiing "e" in display, and start bipping. Then I turn the temperature up and down, and then it have normal function again, maybe in 1 hour, sometimes 14 days I think its a´failure in …Purchase or Repair: Ticket Image...
Show More
Hello! I am from Serbia, and I need the board GE Procond Elettronica Type P. 451510051 F: 4290 Type E. 12430392/5 SW Ver. W2C01250 . I was wondering if there is a shop in Serbia, so I can buy it from here, and if you don\'t have a shop there, is there any chance of ordering it from my country, by th…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by schepers didier on 2011-08-24 12:31
My module for aeg lavamat 72800 /ge procond type p 451515351-e 132219810,version W1a 30106 19 apr 04.give me please the price to repair or to exchange my module ,en how to proceed.thanks

—> Purchase or Repair:
#Procond Elettronica by Lebovich on 2006-12-08 20:16
Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Telecasterkds on 2021-11-20 12:32
only a few survived.

—> Purchase or Repair:
#Procond Elettronica by HUOZAIFA SHAKIR on 2007-07-04 12:33
Hello, the Procond Elettronica MC-70 124438 treadmill controller is still not functioning. Please address this issue

—> Purchase or Repair:
#Procond Elettronica by Alice on 2006-06-20 02:32
The treadmill board on Procond Elettronica MC-70 124438 is malfunctioning, affecting the production line. Please address this issue urgently to resume operations

—> Purchase or Repair:
#Procond Elettronica by amador on 2007-04-17 22:15
the Procond Elettronica MC-70 124438 treadmill controller unit went down mid-shift. Please check it out first thing in the morning. Thanks!

—> Purchase or Repair:
#Procond Elettronica by Manuel on 2009-05-25 17:30
HelloIm also would like to test this my module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this module*******Waht is the cost for repair? What is the cost for a new one?GE Procond ElettronicaType P. 451510050Type E. 12430392/4SW Ver. W2C01202THAN…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by jeff on 2008-06-01 16:43
anyone know the values of dz2 and dz4luserjeff@yahoo.com

—> Purchase or Repair:
#Procond Elettronica by Lee Birloton on 2011-12-27 20:14
PLS price for Procond Elettronicatype:P451525507 F:3711Type: E132219814SW VER.W1a30140 07/dec/05Thanks for help L.Birloton

—> Purchase or Repair:
#Procond Elettronica by Steve Martel on 2007-10-26 10:40
We experienced downtime due to an issue with the Procond Elettronica MC-70 124438 treadmill controller. Urgently need to investigate the problem to prevent further delays. Any insights would be greatly appreciated. Thank you.

—> Purchase or Repair:
#Procond Elettronica by WILDKATmln on 2022-03-07 20:36
manuscripts held onto

—> Purchase or Repair:
#Procond Elettronica by Harbert on 2006-09-21 17:00
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, disrupting our production line. Urgent repair service needed immediately to resolve the issue and restore normal operations.

—> Purchase or Repair:
#Procond Elettronica by Shree kumar jha on 2007-02-05 10:14
The Procond Elettronica MC-70 124438 treadmill controller is not working.

—> Purchase or Repair:
#Procond Elettronica by reza ramezani on 2013-03-30 07:57
The Procond Elettronica 356033305 47-90 circuit board is not working.

—> Purchase or Repair:
#Procond Elettronica by James Kollaja on 2006-06-22 18:29
The treadmill board on the Procond Elettronica MC-7012 124438 is malfunctioning, affecting the production line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:
#Procond Elettronica by Jon Schniers on 2006-10-05 16:06
Donna Im serious I will buy you dinner if you get me the part values and schematic for the MC-70 Controller.My number is 517-546-8314 Jon

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.