Procond Elettronica for Service call 1-336-969-0110 at Industrial Electronics Repair

Procond Elettronica Service & Repair Forum

Hello , please send me the prize of the controll board Procond Electtronica Type Procond 451513003 Type E.Z. 132120000 SW Ver. W1D00109 07/03 I have been around to ask on several places here in Holland and found that the prize that i have to pay here is so high that if you put a € 100 on top of the prize you have a brand new washing machine.I have also tried the second hand stores who all of them have this type of washing machines in stock but all of them have the same problem they all have a burnt control board and all of shop owners have given me the advice to put €100 on top of the Sale prize of the control board here in Holland and you have a brand new washing machine . This is the reason i approach you as Procond Elettronica the manufacturer of the control board for i believe that as only the manufacturer of the board the prize can not be as high as here in Holland , so please send me the prize as soon as possible me i can order a view of them and sell them to the second hand shop owners .Best regards !Hope to hear very soon of you .Jimmy Tel : 0031615833282

—> Purchase or Repair:

— Posted by Jimmy Paragh on 2008-11-11

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "Procond Elettronica"

Procond Elettronica → Procond Elettronica MC-70 124438 ↗
Procond Elettronica → Procond Elettronica Procond Elettronica MC-70 Repair-THANKS ↗
Procond Elettronica → Procond Elettronica MC-70 MOTOR CONTROLLER ↗
Procond Elettronica → Procond Elettronica 45220051 675807501 ↗
Procond Elettronica → Procond Elettronica MC-70 141914 ↗
Procond Elettronica → Thanks ↗
Procond Elettronica → MC-70 AW Rev - motor controller for Image 10.6Q ↗
Procond Elettronica → MC-70 Motor Controller ↗
Procond Elettronica → MC-70 AW.REV- PART#124438 ↗
Procond Elettronica → Procond Elettronica MC-70 motor controller ↗
Procond Elettronica → Procond Elettronica device to create PWM ↗
Procond Elettronica → Procond Elettronica my mc 70 board sent in for repair ↗
Procond Elettronica → AMF Paragon Timer ↗

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 570 Comments

#Procond Elettronica by bratialav on 2013-04-04 06:47

Please for electrical scheme my Esam 3500.THANK YOU...

—> Purchase or Repair:

#Procond Elettronica by raffaele on 2010-08-16 01:33

am looking for the replacement or the value of the ptc 2 which as a no ptc x240 L025 or the diagram whith the value of the componentvery gratefull asap please

—> Purchase or Repair:

#Procond Elettronica by oliver sardo on 2005-06-01 14:56

The Procond Elettronica MC-70 124438 treadmill board unit is displaying abnormal behavior, not functioning as it typically does. Further troubleshooting or inspection may be necessary to determine the issue.

—> Purchase or Repair:

#Procond Elettronica by Independentmgc on 2022-03-12 06:19

or their samples written

—> Purchase or Repair:

#Procond Elettronica by johnny liu on 2007-10-18 17:42

I need DZ1 and DZ24 diodes. Both appear to be burned. Can I repair them?Thanks,Johnny

—> Purchase or Repair:

#Procond Elettronica by amador on 2007-04-17 22:15

the Procond Elettronica MC-70 124438 treadmill controller unit went down mid-shift. Please check it out first thing in the morning. Thanks!

—> Purchase or Repair:

#Procond Elettronica by niazmand on 2013-02-16 03:47

The Procond Elettronica 356033305 is not powering on.

—> Purchase or Repair:

#Procond Elettronica by Thomas Riis on 2011-11-18 07:29

Hi,We have a defect controller board : \"3560144009\" from Procond Elettronica.It fails by periodically stops the motor and heating elements. It seems that the ignition for the motor is unstable. For me it sounds like it is a moped / motorcycle with a bad ignition :-)Please could you inform me what …Purchase or Repair:

#Procond Elettronica by Shree kumar jha on 2007-02-05 10:14

The Procond Elettronica MC-70 124438 treadmill controller is not working.

—> Purchase or Repair:

#Procond Elettronica by James Tesche on 2007-09-26 09:16

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Immediate repair service intervention is crucial to resume operations

—> Purchase or Repair:

#Procond Elettronica by Laszlo Dubai on 2013-04-16 20:19

I have a faulty control board for AEG L74810. The resistor R82 has burnt out. I wish to replace it but I do not know it\'s value. Please can you send me the value and a schematic please?Thank you for your help.

—> Purchase or Repair:

#Procond Elettronica by Garminzwfm on 2022-02-23 00:26

ancient and medieval Latin,

—> Purchase or Repair:

#Procond Elettronica by Zsohár Imre on 2013-03-30 16:21

Please help me!AEG LAVATHERM Dryer turns off after 10 seconds.PNC: 91601416300S / N: 34285616I do not know what is wrong!

—> Purchase or Repair:

#Procond Elettronica by Ir Juli Sinaga on 2006-06-22 00:34

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, affecting the production line. Immediate repair service is required to restore operations.

—> Purchase or Repair:

#Procond Elettronica by MEYERS on 2006-11-16 05:57

Experiencing issues with Procond Elettronica MC-70 124438 treadmill board. Need a skilled technician to repair an industrial unit immediately. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Juicerxnh on 2021-12-02 03:52

Libraries of the Carolingian era). IN

—> Purchase or Repair:

#Procond Elettronica by Meyer on 2007-03-18 05:05

Hello, I'm inquiring about the pricing and availability of the Procond Elettronica MC-70 124438 treadmill controller. I'm looking to source one quickly and wanted to confirm if this is the correct model. Thank you!

—> Purchase or Repair:

#Procond Elettronica by milenko on 2007-11-01 23:15

The Procond Elettronica MC-70 124438 treadmill controller is showing the error code E2. The treadmill stops functioning abruptly after about 2 minutes of use. This issue is impacting our ability to provide uninterrupted services. Your

—> Purchase or Repair:

#Procond Elettronica by Xhuneyt on 2006-06-03 16:22

I have a problem with a motor controler for waching machines, and i wanted you to help me about this. It has not enough force to roll the clothes. I changewd the chip, but it is still not working properly. The code: 3 560 332 06

—> Purchase or Repair:

#Procond Elettronica by altamimi on 2006-01-03 10:57

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Urgent repair service is required to restore operation swiftly.

—> Purchase or Repair:

#Procond Elettronica by aro on 2007-05-31 23:50

Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or needs to be replaced? Trying to check this off my to-do list. Thank you!

—> Purchase or Repair:

#Procond Elettronica by J. Haag on 2006-09-01 20:58

I have an ICON MC-70 motor controller for an IMAGE 10.8q treadmill (IMTL 19372), serial #K23693147 that requires repair as the controller is not functioning correctly. I believe the ICON part number for this controller is #152004. Do you fix these motor controllers?If so, what is the price range for…Purchase or Repair:

#Procond Elettronica by grimes on 2007-10-06 16:57

Hello, do you have a Procond Elettronica MC-70 124438 treadmill controller available for sale? Our unit is down, and we need to keep production running. Thank you.

—> Purchase or Repair:

#Procond Elettronica by allermann on 2007-06-01 04:50

One of the Procond Elettronica MC-70 124438 treadmill controllers is displaying unusual behavior in the warehouse.

—> Purchase or Repair:

#Procond Elettronica by jivat on 2007-03-07 18:14

The treadmill IMAGE 10.6Q has the KEY missing.Can you please provide us the Key or recommendwhere I will be able to get it.Thanks

—> Purchase or Repair:

#Procond Elettronica by schepers.didier@gmail.com on 2011-10-07 06:32

module doesnt work,no output

—> Purchase or Repair:

#Procond Elettronica by mark on 2007-03-24 03:30

Marco,I had a long conversation with a few people and here is what we have come up with for the MC-70 Board.Now depending on the versionDZ4- is the 24V,50ma,5watt zener ORDZ4A and DZ4B- are 12V,650ma,5watts each in series.DZ1- is 15V, 0.2a,1wattDZ2- is a 3.9V, 20ma, 1/2wattI have replaced them as re…Purchase or Repair:

#Procond Elettronica by GiBlobado on 2022-01-03 11:17

kwatery augustow www.noclegi-pracownicze-augustow.online stx21

—> Purchase or Repair:

#Procond Elettronica by Dan Baldauf on 2008-06-20 23:44

I have a treadmill that when turned on starts slowly for about 1 minute and then shuts down. it displays an Er2 error message. Any thoughts on what is wrong the cost it might be to fix it.????Dan

—> Purchase or Repair:

#Procond Elettronica by Lee Birloton on 2011-12-27 20:15

PLS price for Procond Elettronicatype:P451525507 F:3711Type: E132219814SW VER.W1a30140 07/dec/05Thanks for help L.Birloton

—> Purchase or Repair:

#Procond Elettronica by Telecasterkds on 2021-11-20 12:32

only a few survived.

—> Purchase or Repair:

#Procond Elettronica by kellyTag on 2021-12-09 02:09

hello. topic for me thanks kelly

—> Purchase or Repair:

#Procond Elettronica by Tom Mitchell on 2008-02-19 11:27

Hello, I am a business customer seeking repair service for my Procond Elettronica MC-70 124438 treadmill board. The unit is exhibiting an issue where it fails to power on despite being connected to a power source. I have attempted to reset the unit multiple times without success. Based on initial di…Purchase or Repair:

#Procond Elettronica by Salaheldin on 2007-02-12 04:05

Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am aiming to source one quickly. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Holographiccjr on 2022-01-03 08:52

multiplies (see also article

—> Purchase or Repair:

#Procond Elettronica by Greg on 2017-06-08 07:30

Hellol Need schematic for procond elettronika 3560144029 or information about ferrite transformer (voltage winding or equivalent resistance)thank you

—> Purchase or Repair:

#Procond Elettronica by Kosiecki on 2007-10-31 03:37

I'm sorry to hear that your Procond Elettronica MC-70 124438 treadmill controller is not functioning properly. It seems like there is an issue with the machine, but I'm uncertain about the exact problem. I recommend contacting a professional technician to diagnose and fix the problem for you.—> …Purchase or Repair:

#Procond Elettronica by johnny on 2007-10-18 20:17

where to buy these diodes?Thanks,

—> Purchase or Repair:

#Procond Elettronica by Riconda on 2007-03-20 16:01

Please provide information on whether Procond Elettronica MC-70 124438 treadmill controller is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Antonin on 2010-09-26 16:44

I have a Damamaged control board for the above washing machine. The procond type number is 3560 987 02.an other reference number is Ge Procond 451513144.I am trying to get information for this board.Can you help ?Thanks in advanceAntonin

—> Purchase or Repair:

#Procond Elettronica by reidar kvalvik on 2005-08-03 15:08

The Procond Elettronica MC-70 124438 treadmill board is not functioning as per normal. It is displaying irregular behavior.

—> Purchase or Repair:

#Procond Elettronica by FRANCOIS on 2012-04-30 18:15

Bonjour,je suis à la recherche d\'un condensateur réf : 411.10.5060GMF 40/100/21sh 0,15µF(X2)+ 2x 0.004µF (Y)2X0,5 mH + 1.5 MQ250 V~ 50/60Hz -10A/40°c46-94CordialementFrancois

—> Purchase or Repair:

#Procond Elettronica by Boczek on 2006-06-19 20:32

The control panel on the Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a halt in production. Repairs are urgently needed to get the line running smoothly again.

—> Purchase or Repair:

#Procond Elettronica by nguyentanvu on 2006-06-21 02:34

Procond Elettronica MC-70 124438 treadmill controller experiencing frequent power fluctuations, affecting production line efficiency. Urgent repair service needed to resolve issue

—> Purchase or Repair:

#Procond Elettronica by Bobby on 2008-07-31 00:56

Replaced the diodes like all others. Replaced the big resistors as well. Still not working. Getting 130v out from the motor +/- but the motor isn\'t turning. There is a lot of corrosion near this board, as if the previous owner spilled something and maybe shorted out the board. Is there supposed to …Purchase or Repair:

#Procond Elettronica by vdandapani on 2007-08-15 02:10

The Procond Elettronica MC-70 124438 treadmill controller in the warehouse is behaving oddly. It is not functioning as it usually does and seems to have some unusual behavior.

—> Purchase or Repair:

#Procond Elettronica by kenneth Anderson on 2006-02-04 02:00

I would like to thank the people and Industrial Electronic Repair for repairing a mc-70 motor control boad. I was working on an elderly couples treadmill and found the control board defective, when I contacted Industrial I explained how they were elderly and didn\'t have a lot of money. Industrial o…Purchase or Repair:

#Procond Elettronica by Howard Karloff on 2009-06-26 03:21

I have two broken Proform MC60 motor controllers. How much wouldit cost to fix them?

—> Purchase or Repair:

#Procond Elettronica by Mike Holzbauer on 2011-07-02 15:37

How much will it cost to get my circuit board repaired? Where can I send it, how long will it take?

—> Purchase or Repair:

#Procond Elettronica by EL FETOUHI on 2011-03-19 16:35

bonjour, je cherhe le module BOCOND ELECTTRONICA 3560033089POUR LA CAFETIERE DELONGHI MAGNIFICA MERCI

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.