Procond Elettronica Service & Repair Forum

Marco,I had a long conversation with a few people and here is what we have come up with for the MC-70 Board.Now depending on the versionDZ4- is the 24V,50ma,5watt zener ORDZ4A and DZ4B- are 12V,650ma,5watts each in series.DZ1- is 15V, 0.2a,1wattDZ2- is a 3.9V, 20ma, 1/2wattI have replaced them as required and as needed and have made money in the mean time repairing them locally.Good Luck

—> Purchase or Repair: Ticket Image

— Posted by mark on 2007-03-24

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 570 Comments

#Procond Elettronica by Casella Vincenzo on 2013-04-05 22:57
Dear Sirs, I have a PROCOND ELETTRONICA card damaged.It is inside the yellow cover with these codesTYPE: 452604120COD ZANUSSI: 15248541/0220/240 Vac - 50 Hz T65 Ver. AWK 27/00The ELECTRONIC CARD inside damaged is marked:GE PROCOND ELETTRONICA 356084500The processor assembled on the card is marked SI…Purchase or Repair: Ticket Image...
Show More
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a major disruption in the production line. Urgent repair service is required to rectify the issue and resume operations

—> Purchase or Repair:
#Procond Elettronica by Mount on 2006-11-08 18:57
The treadmill controller on the Procond Elettronica MC-70 124438 is malfunctioning, disrupting the production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#Procond Elettronica by Maurice on 2007-06-01 07:50
The Procond Elettronica MC-70 124438 treadmill controller in the warehouse is experiencing unusual behavior - it's not functioning as expected.

—> Purchase or Repair:
#Procond Elettronica by james bryan on 2008-03-20 12:56
we need to t know the replacement cost for this item.Brand:gepruft#vc50er 9pi2004-22-lch3105

—> Purchase or Repair:
#Procond Elettronica by PatrickvoB on 2022-05-19 20:44
An injury that renders a person handicapped and prohibits them from returning to work for a lengthy period of time is known as a long-term disability. Long-term disability lawyers in Brampton can offer you peace of mind and support during this difficult time.

—> Purchase or Repair:
#Procond Elettronica by Tebbutt on 2007-10-04 13:28
I require urgent assistance with the Procond Elettronica MC-70 124438 treadmill controller. The unit is still not functioning, and I need someone to address the issue

—> Purchase or Repair:
#Procond Elettronica by Josephfug on 2007-10-03 18:46
Looking for repair service for Procond Elettronica MC-70 124438 treadmill board. Not functioning properly, need a technician to fix industrial unit ASAP.

—> Purchase or Repair:
#Procond Elettronica by Lucien Huble on 2015-03-08 11:13
I have a faulty control board for EWF 1620 The resistor R82 has burnt out. I wish to replace it but I do not know it\'s value. Please can you send me the value and a schematic please? Thank you for your help.

—> Purchase or Repair:
#Procond Elettronica by Juicerxnh on 2021-12-02 03:52
Libraries of the Carolingian era). IN

—> Purchase or Repair:
#Procond Elettronica by kellyTag on 2021-12-29 15:17
hello. topic for me thanks kelly

—> Purchase or Repair:
Hi,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 356071101 - LABEL NO 452650111 - FOR Ariston dishwasher LSI 66 A. AND ALSO THE PRICE FOR A TRANSPORTATION TO ITALY.With regards, GIANFRANCO MANUNTA, via M. Macchi 87 - 20124 Milano - ItalyTHANK YOU

—> Purchase or Repair:
#Procond Elettronica by giles on 2005-12-09 22:47
The Procond Elettronica MC-70 124438 treadmill board in the warehouse is displaying unusual behavior - it is not functioning as it normally does.

—> Purchase or Repair:
#Procond Elettronica by MALIK RIAZ on 2011-05-18 08:18
I HAVE MC-70 MOTOR CONTROLLER CARD, PLEAS I WANT TO KNOW SOME PARTS VALUES OF THESE LOCATION ,R57,DZ1,DZ4 ITS BURNED WITH OVER VOLTS

—> Purchase or Repair:
#Procond Elettronica by Hermelindo on 2007-08-01 12:49
I am following up regarding my Procond Elettronica MC-70 124438 treadmill controller issue. The unit is still down. I kindly request immediate assistance. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Faheem on 2007-04-18 14:00
The Procond Elettronica MC-70 124438 treadmill controller is not working as reported by someone in the shop.

—> Purchase or Repair:
#Procond Elettronica by Ali Raza on 2006-12-18 06:04
Following up on my previous message regarding the Procond Elettronica MC-70 124438 treadmill board issue. The unit is still non-operational. I expect a

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a production line halt. Immediate repair service needed to resume operations.

—> Purchase or Repair:
#Procond Elettronica by ARVIND on 2007-03-31 22:47
The Procond Elettronica MC-70 124438 treadmill board is not working.

—> Purchase or Repair:
#Procond Elettronica by Nestor Juguera on 2008-05-26 23:32
need schematics for the 356069403 for even microwave delonghy mw605/3. Where can I get a copy?

—> Purchase or Repair:
#Procond Elettronica by Asher on 2007-07-28 16:29
Seeking assistance for a Procond Elettronica MC-70 124438 treadmill controller that is displaying error codes and not functioning properly. Need urgent repair service.

—> Purchase or Repair:
#Procond Elettronica by kevin on 2010-01-15 02:55
DEAR SIRS,COULD YOU TELL ME THE PRICE FOR A PROCOND ELETTRONICA PART NO. 411624430.MANY REGARDS KEVIN

—> Purchase or Repair:
#Procond Elettronica by sarwar alam on 2006-06-10 21:11
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, leading to a disruption in the production line. We need immediate repair service to address this issue and resume operations swiftly.

—> Purchase or Repair:
#Procond Elettronica by mark bunker on 2005-11-23 05:08
The Procond Elettronica MC-70 124438 treadmill board is experiencing abnormal behavior in the warehouse.

—> Purchase or Repair:
#Procond Elettronica by FAUSTINO on 2007-03-09 05:48
Hello, I am interested in purchasing the Procond Elettronica MC-70 124438 treadmill controller as I have been advised by my team to inquire about its availability. Could you please provide me with information regarding pricing and availability? I am looking to source this unit quickly. Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by amin moradi on 2017-06-01 23:37
HiI need schematic of this board Procond Elettronica 3560101029thanks

—> Purchase or Repair:
#Procond Elettronica by Muhammad usman on 2016-07-26 10:01
Dear Sir,Please helpot me hoe i repair this controller , its burnt due to 220V ,or please send me its technical data sheet where i can fix it Thanks

—> Purchase or Repair:
The Procond Elettronica MC-70 #124438 unit is displaying abnormal behavior in the warehouse. More specifically, it is not functioning as it typically does and is exhibiting strange actions.

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is not working.

—> Purchase or Repair:
#Procond Elettronica by DIEHL on 2011-03-29 10:45
Hello,Could you tell me the price for the Procond Elettronica Part no 3560061009 ( V16 ) for a refrigerator Vedette RC306.I only need the electronical cartBest RegardsMr DIEHL

—> Purchase or Repair:
#Procond Elettronica by Baron on 2007-09-24 12:06
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, possibly due to a power issue. Looking for a technician to repair the industrial unit

—> Purchase or Repair:
#Procond Elettronica by Andrew Walford on 2008-12-08 19:30
Hi can you gve me a price for the above, cheers

—> Purchase or Repair:
#Procond Elettronica by Emilio Utrilla on 2013-06-03 17:10
Hello, I need where to buy or repair a Procond elettronica 3560089039 module and the price.Its for an EDESA dishwasherThank you.Hallo,Bonjour je recherche le module Procond elettronica 3560089039 (neuf ou réparation du vieil) pour un lave vaisselle EDESA et le prixMerciHola,Estoy buscando un módulo …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Edward Pavlina on 2007-05-14 17:19
Can the Procond Elettronica MC-70 124438 treadmill board be repaired or replaced? I'm looking to check this off my to-do list.

—> Purchase or Repair:
#Procond Elettronica by ALEMU on 2006-12-08 15:16
Just had a board failure on Procond Elettronica MC-70 124438 treadmill controller. Will investigate further once this round is done.

—> Purchase or Repair:
#Procond Elettronica by RAMIRO VEGA H on 2007-08-21 20:18
Do you have a Procond Elettronica MC-70 124438 treadmill controller available for sale or repair? Urgent for production needs.

—> Purchase or Repair:
#Procond Elettronica by Jaro Laine on 2007-02-08 20:32
I'm following up again regarding my Procond Elettronica MC-70 124438 treadmill controller issue. It's still not working. I need assistance with this as soon as possible.

—> Purchase or Repair:
#Procond Elettronica by Peter Hancock on 2010-12-18 19:07
Hi,Please quote your repair, exchange or refurbished unit prices for Procond Elettronica controller PN 141877 used in a Proform 830 treadmill.Thanks,Peter

—> Purchase or Repair:
#Procond Elettronica by HUOZAIFA SHAKIR on 2007-07-04 12:33
Hello, the Procond Elettronica MC-70 124438 treadmill controller is still not functioning. Please address this issue

—> Purchase or Repair:
#Procond Elettronica by Thomas Riis on 2011-11-18 07:29
Hi,We have a defect controller board : \"3560144009\" from Procond Elettronica.It fails by periodically stops the motor and heating elements. It seems that the ignition for the motor is unstable. For me it sounds like it is a moped / motorcycle with a bad ignition :-)Please could you inform me what …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Steve Martel on 2007-10-26 10:40
We experienced downtime due to an issue with the Procond Elettronica MC-70 124438 treadmill controller. Urgently need to investigate the problem to prevent further delays. Any insights would be greatly appreciated. Thank you.

—> Purchase or Repair:
#Procond Elettronica by ramon on 2010-08-05 13:18
Hola, esta maquina con nº prod. 914602703-00 no hace el programa de secado, cuando acaba de lavar activa un relé gira el tambor unas vueltas y para, no llega tension al motor de secado ni a la resistencia.Sospechamos de la placa 451510238 type E.132156823, el Servicio Oficial ha dicho que no hay rec…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Numambsurka on 2006-06-22 13:34
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Immediate repair service is needed to restore the line's operation swiftly.

—> Purchase or Repair:
#Procond Elettronica by john mckinley on 2007-02-22 00:03
Hi there, I am looking for a replacement Procond Elettronica MC-70 124438 for a treadmill controller. Do you have one available for sale? Thank you.

—> Purchase or Repair:
#Procond Elettronica by julien on 2018-10-27 12:59
I need to replace (or repair) the electeonic card of my dryer Faure. The Start button donnot work any more.Thanks,Michel Julien

—> Purchase or Repair:
#Procond Elettronica by Stan may on 2007-04-04 19:56
Hello, I'm interested in the Procond Elettronica MC-70 124438 treadmill board. Could you please provide information on pricing and availability? I'm hoping to source one quickly. Thank you.

—> Purchase or Repair:
#Procond Elettronica by javid on 2007-09-19 00:05
Hello, I am reaching out on behalf of a client who is experiencing issues with a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide more information on troubleshooting steps or potential repair options? Thank you.

—> Purchase or Repair:
#Procond Elettronica by OSA on 2005-08-02 11:13
The Procond Elettronica MC-70 124438 treadmill board is displaying unusual behavior in the warehouse. It is not functioning as expected.

—> Purchase or Repair:
#Procond Elettronica by Mike Holzbauer on 2011-07-02 15:37
How much will it cost to get my circuit board repaired? Where can I send it, how long will it take?

—> Purchase or Repair:
#Procond Elettronica by Dan Baldauf on 2008-06-20 23:44
I have a treadmill that when turned on starts slowly for about 1 minute and then shuts down. it displays an Er2 error message. Any thoughts on what is wrong the cost it might be to fix it.????Dan

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.