Procond Elettronica Service & Repair Forum

Can you please advise what it would cost to repair a MC-70 board for my Nordic Track treadmill? The power supply board has all the LED\'s lit (the PWM flashes only when it calls for speed). The motor works (I\'ve used a 12 vdc power supply to test). I\'ve also checked to make sure that 120Vac is supplied to the board.The treadmill control display appears to function correctly (heart rate monitor, timer, program, etc). When I select the button to speed up, the belt does not run.I would like to know shipping details also.

—> Purchase or Repair: Ticket Image

— Posted by Joseph on 2007-02-03

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 569 Comments

#Procond Elettronica by Fred Santizo on 2006-01-29 05:40
Dear Sir/Madam:I need a device with tree switches. It must create the PWM to control the speed of a treadmill motor controller. One of the switch will turn on/off the treadmill the other two will be use to increase/decrease the speed of the motor or the treadmill. I want to eliminate the console of …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Pavel Zima on 2012-01-10 12:52
HelloIs it possible to have a schematic or technical datasheet of this moduleProcond Elettronica 3560132009 Pavel Zima

—> Purchase or Repair:
#Procond Elettronica by REALI on 2014-11-17 18:25
I HAVE AN ARTHUR MARTIN ELECTROLUX WASHING MACHINE AND THE ELECTRONIC CARD HAS TAKEN WATER AND IT BURNED OUT. i WANTED TO KNOW WHETHER YOU COULD REPAIR IT OR EXCHANGE IT.CAN YOU GIVE YOUR PRICE FOR IT.i give you the references:prod number:91451270400type p:451510050F:4875Type E: 12430392/4SW ver. W2…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by J. Haag on 2006-09-01 20:58
I have an ICON MC-70 motor controller for an IMAGE 10.8q treadmill (IMTL 19372), serial #K23693147 that requires repair as the controller is not functioning correctly. I believe the ICON part number for this controller is #152004. Do you fix these motor controllers?If so, what is the price range for…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Vitamixxfp on 2022-01-20 00:51
secular brotherhoods of scribes.

—> Purchase or Repair:
#Procond Elettronica by Evangelist on 2007-04-08 00:14
The Procond Elettronica MC-70 124438 treadmill board malfunctioned during the previous shift, causing unexpected downtime. I need a quick response before the next shift begins. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Rodriguez. on 2006-11-27 14:20
Please provide an update on the status of the repair for my Procond Elettronica MC-70 124438 treadmill board. It is still not functioning, and I require assistance immediately.

—> Purchase or Repair:
#Procond Elettronica by John Byrne on 2006-06-23 07:34
The Procond Elettronica MC-70 124438 treadmill controller board is malfunctioning, affecting the production line. We need urgent repair service to resolve the issue

—> Purchase or Repair:
#Procond Elettronica by Robin Cooper on 2007-03-09 04:48
The Procond Elettronica MC-70 124438 is a treadmill controller unit that is not functioning properly.

—> Purchase or Repair:
#Procond Elettronica by Andrew Walford on 2008-12-08 19:30
Hi can you gve me a price for the above, cheers

—> Purchase or Repair:
#Procond Elettronica by Xhuneyt on 2006-06-03 16:22
I have a problem with a motor controler for waching machines, and i wanted you to help me about this. It has not enough force to roll the clothes. I changewd the chip, but it is still not working properly. The code: 3 560 332 06

—> Purchase or Repair:
#Procond Elettronica by DOENLEN on 2009-07-05 09:32
BONJOUR,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 356066303-FOR SIEMENS REFRIGERATOR REF KI24L451FF/01?BEST REGARDSGUY DOENLEN

—> Purchase or Repair:
#Procond Elettronica by Flashpaqmzt on 2021-11-18 14:10
elements (case, binding).

—> Purchase or Repair:
#Procond Elettronica by Jeff Haag on 2006-06-16 02:00
I believe my MC-70 controller board may be bad. Do you repair these boards? Is this board manufactured by Procond Elettronica?Thanks.

—> Purchase or Repair:
#Procond Elettronica by Loyd Gerard on 2007-03-28 17:34
Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or replaced? I'm working on crossing this off my to-do list.

—> Purchase or Repair:
#Procond Elettronica by Tebbutt on 2007-10-04 13:28
I require urgent assistance with the Procond Elettronica MC-70 124438 treadmill controller. The unit is still not functioning, and I need someone to address the issue

—> Purchase or Repair:
#Procond Elettronica by Satish Rane on 2007-10-03 04:55
Hello, I am interested in purchasing the Procond Elettronica MC-70 124438 treadmill board. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Michael Read on 2007-08-13 10:23
I am following up on my previous message regarding the Procond Elettronica MC-70 124438 treadmill board issue. The unit is still non-functional. I need urgent assistance. Please reply

—> Purchase or Repair:
#Procond Elettronica by Faheem on 2007-04-18 14:00
The Procond Elettronica MC-70 124438 treadmill controller is not working as reported by someone in the shop.

—> Purchase or Repair:
#Procond Elettronica by Visionouv on 2021-12-10 22:38
drafts of literary works

—> Purchase or Repair:
#Procond Elettronica by Joseph Buhagiar on 2012-09-30 14:51
I would like to enquire the cost of a repair or purchase of a new control card for an AEG lavamat silent system plus 74650. The number on the control card is Procond elettronica 3560132009.Thanks and regards,Joseph

—> Purchase or Repair:
#Procond Elettronica by eko juhan on 2006-12-19 17:01
The Procond Elettronica MC-70 124438 motor controller board is not working.

—> Purchase or Repair:
Hello, we are seeking repair information for a Procond Elettronica MC-70 124438 treadmill board. Could you please provide repair details or assist in locating a replacement part? Thank you.

—> Purchase or Repair:
Could you please provide information on whether the Procond Elettronica MC-70 124438 treadmill board is still supported, and if parts are available for replacement or repair?

—> Purchase or Repair:
#Procond Elettronica by Marcie on 2006-11-08 19:57
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, halting production. Urgent repair service needed to restore operations immediately.

—> Purchase or Repair:
#Procond Elettronica by Esparza on 2007-04-05 00:56
I am following up on my previous message regarding the Procond Elettronica MC-70 124438 treadmill controller. The unit is still not functioning. Please provide assistance

—> Purchase or Repair:
I need a value for R57 &wattage rating on the above mc-70 pcb.

—> Purchase or Repair:
#Procond Elettronica by qmjLtxUZeNo on 2007-10-02 00:29
Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
NEED BOARD MACHINE INSTALLED IN A CARRIER AIR CONDITIONER BRAND MODEL:GE ELECTRONIC PROCOND 356,068,908.YOU CAN DELIVER IN THE U.S. EVEN VIA FEDEX?OUR CUSTOMER WILL BE IN THE USA next week.PLS WAIT RETURN.CLÓVIS HIROSHI KUNII

—> Purchase or Repair:
#Procond Elettronica by Larry Nadler on 2007-01-20 15:40
Got the board back and it works great! Amazing turn around time....you got in on a Friday and I had it back the next Wednesday....Unheard of especially with a check in the box for payment! Did you change anything else besides those 2 Zener diodes to heavier duty components? Thanks again.....Do you w…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Lucjan Raubic on 2006-01-14 18:54
The treadmill controllers of Procond Elettronica MC-70 124438 are malfunctioning, halting production. Urgent repair service is needed to resolve this issue

—> Purchase or Repair:
#Procond Elettronica by Ali Raza on 2006-12-18 06:04
Following up on my previous message regarding the Procond Elettronica MC-70 124438 treadmill board issue. The unit is still non-operational. I expect a

—> Purchase or Repair:
#Procond Elettronica by Edgarhoora on 2006-12-15 15:06
Hey, the Procond Elettronica MC-70 124438 treadmill board failed during the night shift. It needs attention before using. Cheers!

—> Purchase or Repair:
#Procond Elettronica by randon on 2007-08-09 13:55
HelloI would like to test this module, i don\'t know if it\'s working wellIs it possible to have a schematic or technical datasheet of this moduleRef = Type P:451510073 Type E: 12430382/1WL401009THANKS A LOTBEST REGARDS

—> Purchase or Repair:
#Procond Elettronica by Anita Hadlow on 2010-08-30 11:23
Dear SirWe are looking for the above part for a servis 1500 Caress washing machine. could you please advise cost and availability.RegardsAnita Hadlow

—> Purchase or Repair:
#Procond Elettronica by Marco Gualengi on 2007-07-19 20:25
Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am trying to source one quickly. Thank you.

—> Purchase or Repair:
#Procond Elettronica by patrick on 2012-04-18 17:19
This Procond elettronica is bad because no responces!!!

—> Purchase or Repair:
#Procond Elettronica by PAUL MITCHELL on 2007-10-05 15:57
HI THERE COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 411122430 OUT OF A ZANNUSI WASHING MACHINE.MANY REGARDS PAUL.

—> Purchase or Repair:
#Procond Elettronica by James Tesche on 2007-09-26 09:16
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Immediate repair service intervention is crucial to resume operations

—> Purchase or Repair:
#Procond Elettronica by Locke on 2005-09-22 23:37
The unit that appears to be causing trouble is the treadmill board within the Procond Elettronica MC-70 124438 equipment. It is behaving unusually and not functioning as it typically does.

—> Purchase or Repair:
#Procond Elettronica by marjan cresnar on 2005-12-21 18:47
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a hold-up in the production line. Immediate repair service is needed to resume operations.

—> Purchase or Repair:
#Procond Elettronica by I Globerman on 2007-08-15 16:35
Dear team, there was a downtime incident involving the Procond Elettronica MC-70 124438, which is a treadmill controller. The issue occurred earlier today and I need a quick response before the next shift begins. Thank you.

—> Purchase or Repair:
#Procond Elettronica by philip on 2007-04-04 00:19
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a significant disruption to the production line. Urgent repair service is required to address this critical issue

—> Purchase or Repair:
#Procond Elettronica by Joann on 2007-01-10 03:11
Can the Procond Elettronica MC-70 124438 treadmill board be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Procond Elettronica by schepers didier on 2011-08-24 12:31
My module for aeg lavamat 72800 /ge procond type p 451515351-e 132219810,version W1a 30106 19 apr 04.give me please the price to repair or to exchange my module ,en how to proceed.thanks

—> Purchase or Repair:
#Procond Elettronica by Jimmy Paragh on 2008-11-10 09:10
Hello , i am looking for a washing machine Electronic part, please let me know the prize and how to get it as quick as possible? Procond Elettronica Type Procond 451513003 Type E.Z 132120000 SW Ver. W1D00109 07/03

—> Purchase or Repair:
#Procond Elettronica by Reimert on 2007-09-30 14:53
HelloIm also would like to test this my module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this module *******Waht is the cost for repair? What is the cost for a new one?GE Procond ElettronicaType P. 451510051 Type E. 12430392/5SW Ver. W2C01250 2…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by János Madarasz on 2008-08-10 18:58
Wellcome!I would like to know conecting up of 356069403 microwave.How can you help me ?Sincerelly János Madarasz

—> Purchase or Repair:
#Procond Elettronica by Gerald Harman on 2009-07-23 16:55
Please repair and tesT under load for satisfactory operation. Believe burn out at DZ1, dz4a, dz4b LOCATION ON BOARD.

—> Purchase or Repair:
#Procond Elettronica by Henke on 2007-01-26 02:53
The Procond Elettronica MC-70 124438 treadmill controller is not working.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.