Ropex Service & Repair Forum

Ropex RES-403/230VAC 740302 controller not responding to input commands, halting production.

—> Purchase or Repair: Ticket Image

— Posted by R. R. SARAF on 2012-01-17

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Ropex"

If you need your Ropex unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 106 Comments

#Ropex by Valadka on 2014-09-24 00:23
The Ropex RES-440-L/400VAC 744013 is a Control Unit that is currently not functioning properly.

—> Purchase or Repair:
#Ropex by Don Pritchard on 2014-12-25 17:06
We experienced downtime due to a malfunction with the Ropex RES-440-L/400VAC 744013 Control Unit. The issue occurred during the previous shift. Can you provide some insights about what went wrong and any recommendations for troubleshooting before the next shift begins?

—> Purchase or Repair:
#Ropex by muhammad Nouman on 2014-11-21 10:12
Could you please confirm if the Ropex RES-440-L/400VAC 744013 Control Unit is still supported, and if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#Ropex by R. R. SARAF on 2012-01-17 04:16
Ropex RES-403/230VAC 740302 controller not responding to input commands, halting production.

—> Purchase or Repair:
#Ropex by McLaren on 2014-02-19 16:19
The Ropex RES-440-L/400VAC 744013 Control Unit is still down. Need a response

—> Purchase or Repair:
#Ropex by Juan C Perez on 2014-05-04 00:20
One of the Ropex RES-440-L/400VAC 744013 units in the warehouse is exhibiting unusual behavior. It is not functioning as expected, but I am not able to provide a specific term for the malfunction.

—> Purchase or Repair:
#Ropex by Ronald Boylan on 2014-08-19 16:26
One of the drive units just failed in the Ropex RES-440-L/400VAC 744013 control unit. I'll need to troubleshoot and replace it ASAP.

—> Purchase or Repair:
#Ropex by MitchelJege on 2014-03-13 16:02
I'm having trouble with the Ropex RES-440-L/400VAC 744013. The control unit seems to have stopped working properly. I'm not sure what the issue is, but your help would be greatly appreciated.

—> Purchase or Repair:
#Ropex by Rick Pero on 2012-05-26 18:04
The Ropex RES-403/230VAC 740302 controller is not powering on.

—> Purchase or Repair:
#Ropex by Dantonio on 2012-02-09 22:35
Can you please confirm if the Ropex RES-403/230VAC 740302 controller is still supported? We are looking for replacement or repair options for this unit, but we are unsure about its manufacturer. Your assistance would be greatly appreciated. Thank you.

—> Purchase or Repair:
#Ropex by giron on 2012-10-28 16:03
I'm experiencing issues with the Ropex 0 740302, which I believe is a Temperature Controller. Something seems to have stopped working, and I'm unsure how to address it. Any assistance or guidance would be greatly appreciated.

—> Purchase or Repair:
#Ropex by John de Castro on 2012-08-23 10:48
the Ropex 0 740302 Temperature Controller failed during the night shift. Please check it out first thing in the morning. Thanks!

—> Purchase or Repair:
#Ropex by Hesham on 2012-10-21 06:18
Hey, the Ropex 0 740302 temperature controller just crapped out on us. Gotta fix this ASAP to keep things running smoothly.

—> Purchase or Repair:
#Ropex by JAYARAJAN.C.N on 2014-12-28 07:06
Hello, I'm reaching out on behalf of a client who needs assistance with a Ropex RES-440-L/400VAC 744013 Control Unit. They are experiencing some issues but we don't have the full details yet. Can you please provide information on how to diagnose and potentially repair this unit? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#Ropex by manop on 2014-12-04 04:23
I've noticed that the Ropex RES-440-L/400VAC 744013 control unit seems to have stopped functioning properly. It's difficult to pinpoint the exact issue without further investigation. I recommend having a technician take a look to diagnose and repair the problem.

—> Purchase or Repair:
#Ropex by William Bacon on 2014-10-27 06:18
Ropex RES-440-L/400VAC 744013 Control Unit not powering on.

—> Purchase or Repair:
#Ropex by kirankumar on 2012-03-29 23:18
Hello, we have a client who is experiencing issues with the Ropex RES-403/230VAC 740302 controller. Can you please provide information on troubleshooting and repair options for this product? Thank you.

—> Purchase or Repair:
#Ropex by Danielglota on 2014-12-22 01:44
Hello, Can the Ropex RES-440-L/400VAC 744013 Control Unit be repaired or replaced? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:
#Ropex by wbjs on 2012-12-02 10:13
The Ropex RES-403/230VAC 740302 controller is showing error code E102, indicating a communication failure with the main unit. Equipment is currently down, affecting production. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Ropex by Faheem on 2012-07-31 14:37
Looking for a technician to repair my Ropex RES-403/230VAC 740302 controller unit. It's not functioning correctly and needs immediate attention. Please let me know if you can assist with fixing this industrial unit.

—> Purchase or Repair:
#Ropex by grimes on 2014-02-12 20:58
The Ropex RES-440-L/400VAC 744013 Control Unit is exhibiting abnormal behavior in the warehouse. The unit is not functioning as it normally does.

—> Purchase or Repair:
#Ropex by Don Havener on 2012-01-28 15:12
I'm having trouble with the Ropex 0 740302, which I believe is a Temperature Controller. It seems that something has stopped working, and I'm unsure how to fix it. Any assistance or guidance would be greatly appreciated.

—> Purchase or Repair:
#Ropex by mohsen ahmadi on 2014-12-25 13:44
Ropex RES-440-L/400VAC 744013 Control Unit is not responding.

—> Purchase or Repair:
#Ropex by Gallo on 2014-12-31 22:54
The Ropex RES-440-L/400VAC 744013 control unit experienced a malfunction earlier today, leading to unexpected downtime. It occurred at approximately 230 PM during the production shift. Could you please provide some insight into what might have caused this issue? Thank you, and looking forward to you…Purchase or Repair: Ticket Image...
Show More
#Ropex by Bondan Susilo Rahardjo on 2012-02-08 08:55
The Ropex 0 740302 Temperature Controller unit isn't working as reported.

—> Purchase or Repair:
#Ropex by MOHAMED DRICI on 2012-08-24 08:00
The Ropex 0 740302 Temperature Controller is not functioning properly.

—> Purchase or Repair:
#Ropex by Jeffrey on 2012-03-25 01:08
The Ropex RES-403/230VAC 740302 controller unit is malfunctioning, causing a significant disruption to our production line. Immediate action is required to rectify this issue

—> Purchase or Repair:
#Ropex by LaCruze on 2012-02-24 00:21
The Ropex 0 740302 temperature controller is displaying Error Code E21, indicating a malfunction with the temperature sensor. Equipment is not regulating temperature properly, causing inconsistencies in production. Please advise on troubleshooting steps or schedule a technician visit for repair. —> …Purchase or Repair: Ticket Image...
Show More
#Ropex by Rafael Wischkin on 2014-02-12 05:58
Could you please advise if the Ropex RES-440-L/400VAC 744013 Control Unit is still supported or if replacement parts are available for it? We have an older unit but are unsure of the manufacturer.

—> Purchase or Repair:
#Ropex by Jinnings on 2012-04-23 22:21
Could you please confirm if the Ropex RES-403/230VAC 740302 Controller is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:
#Ropex by roland MIRANDA on 2012-09-13 09:08
My Ropex 0 740302, which I believe is a Temperature Controller, is experiencing some issues. Something seems to have stopped working, and I'm unsure how to troubleshoot it. Any guidance or support would be greatly appreciated.

—> Purchase or Repair:
#Ropex by GRAPHIQUE on 2012-04-14 19:33
My Ropex RES-403/230VAC 740302 industrial unit stopped working suddenly. Need a specialist to repair the controller ASAP.

—> Purchase or Repair:
#Ropex by Duryab Tahir on 2012-08-04 11:24
Hello, I am inquiring about Ropex 0 740302, which is a Temperature Controller. My client is experiencing some issues with it and needs assistance. Can you provide me with more information on possible repairs or replacements? Thank you.

—> Purchase or Repair:
#Ropex by AGUSTI on 2012-10-28 22:03
the Ropex RES-403/230VAC 740302 controller unit went down mid-shift. Needs attention ASAP. Thanks.

—> Purchase or Repair:
#Ropex by Kristie Thompson on 2014-12-24 04:06
Looking for repair for Ropex RES-440-L/400VAC 744013 Control Unit unit not powering up or responding to controls. Please contact if you can troubleshoot and repair

—> Purchase or Repair:
#Ropex by Nilo on 2014-12-05 17:23
The Ropex RES-440-L/400VAC 744013 Control Unit in the warehouse is exhibiting abnormal behavior - it is not functioning as it typically does.

—> Purchase or Repair:
#Ropex by Deline on 2012-08-02 08:55
The Ropex RES-403/230VAC 740302 controller is not working as reported.

—> Purchase or Repair:
#Ropex by Kiphart on 2012-03-02 04:10
Ropex RES-403/230VAC 740302 controller failure. Need to replace drive or board ASAP.

—> Purchase or Repair:
#Ropex by Otto Schmidt on 2012-01-31 02:03
The Ropex RES-403/230VAC 740302 controller is displaying error code E07, causing the equipment to malfunction. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Ropex by Javier Valle on 2012-04-27 21:08
The Ropex 0 740302 is a Temperature Controller that is currently not working. Maintenance team is trying to troubleshoot the issue.

—> Purchase or Repair:
#Ropex by Lee Chestnut on 2014-05-06 08:20
Hello, I'm interested in purchasing the Ropex RES-440-L/400VAC 744013 Control Unit. I just want to confirm the pricing and availability for this model as I'm looking to source one quickly. Thank you!

—> Purchase or Repair:
#Ropex by Phillip E Mead on 2025-09-19 20:11
Request Service for RopexModel/Part : 744013 Res 440 L 400Vac Control Unit

—> Purchase or Repair:
#Ropex by Fencer on 2012-06-15 08:28
Need someone to fix my Ropex RES-403/230VAC 740302, it's a controller. What's causing the unit to malfunction? Would appreciate a quick response to get it up and running again.

—> Purchase or Repair:
#Ropex by Kyle and Kay Conant on 2014-02-20 03:00
Ropex RES-440-L/400VAC 744013 Control Unit is displaying error code E4 and not responding to any inputs.

—> Purchase or Repair:
#Ropex by EZALDEIN on 2014-11-21 14:12
Hello, I'm interested in the Ropex RES-440-L/400VAC 744013 Control Unit for purchase. Can you please provide me with information on pricing and availability? I'm looking to source this quickly. Thank you.

—> Purchase or Repair:
#Ropex by Kft. on 2012-07-27 15:19
Ropex 0740302 displaying error code E4, generating high temp alarm. Equipment down, urgent assistance needed.

—> Purchase or Repair:
#Ropex by John Scarborough on 2012-02-06 17:32
Ropex RES-403/230VAC 740302 controller not responding to input commands, hindering production line.

—> Purchase or Repair:
#Ropex by MUHAMMAD JAMIL AKHTER on 2012-09-19 21:15
I need urgent assistance with Ropex 0 740302, the Temperature Controller. The unit is still down. Please respond

—> Purchase or Repair:
#Ropex by renante on 2014-12-19 13:44
Looking for a technician to repair my non-functioning Ropex RES-440-L/400VAC 744013 Control Unit. It's not powering up despite proper connections. Need urgent assistance.

—> Purchase or Repair:
#Ropex by muhammad Nouman on 2014-12-21 12:44
The Ropex RES-440-L/400VAC 744013 is not functioning. Maintenance team is investigating.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.