Ropex Service & Repair Forum
The Ropex RES-440-L/400VAC 744013 Control Unit is still down. Need a response
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "Ropex"
- Ropex → Ropex RES-403/230VAC 740302 ↗
- Ropex → Ropex 0 740302 ↗
If you need your Ropex unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 106 Comments
Just had a failure on the Ropex RES-440-L control unit at 744013, likely a drive or board issue. Will investigate further and report back.
—> Purchase or Repair:
—> Purchase or Repair:
the Ropex RES-440-L/400VAC 744013 control unit went down during the shift. Needs attention ASAP. Thanks.
—> Purchase or Repair:
—> Purchase or Repair:
One of the drive units just failed in the Ropex RES-440-L/400VAC 744013 control unit. I'll need to troubleshoot and replace it ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
The Ropex 0 740302 temperature controller experienced a malfunction that led to unexpected downtime. The issue occurred on , impacting our production output. Please advise on the best course of action to prevent this from happening again before the next shift begins. Thank you. —> …Purchase or Repair: 
...
Show More
Show More
Ropex RES-440-L/400VAC 744013 Control Unit not responding to power-up, no display, no audible alerts.
—> Purchase or Repair:
—> Purchase or Repair:
Ropex 0 740302 temperature controller malfunctioning, affecting production line operation. Uptime critical, require immediate repair service for swift resolution.
—> Purchase or Repair:
—> Purchase or Repair:
I am experiencing an issue with the Ropex RES-440-L/400VAC 744013 Control Unit where something seems to have stopped working. I am uncertain about the exact nature of the problem, but could you please provide assistance with troubleshooting it? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Ropex RES-403/230VAC 740302 controller on Unit X went down during the night shift. Need to investigate and repair ASAP. Can you take care of it during the day shift? Thanks.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, Can the Ropex RES-440-L/400VAC 744013 Control Unit be repaired or replaced? I'm trying to check this off my to-do list. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I've noticed that the Ropex RES-440-L/400VAC 744013 control unit seems to have stopped functioning properly. It's difficult to pinpoint the exact issue without further investigation. I recommend having a technician take a look to diagnose and repair the problem.
—> Purchase or Repair:
—> Purchase or Repair:
The Ropex 0 740302, which is a Temperature Controller unit, malfunctioned earlier today causing unexpected downtime. It happened during the night shift between 200 AM and 300 AM. Please provide guidance on what actions need to be taken to prevent this from reoccurring. Thank you. —> …Purchase or Repair: 
...
Show More
Show More
The Ropex RES-403/230VAC 740302 controller is showing error code E005, indicating a communication fault with the sensor. Equipment unable to regulate temperature. Urgent repair needed to resume operations.
—> Purchase or Repair:
—> Purchase or Repair:
Need someone to fix my Ropex RES-403/230VAC 740302, it's a controller. What's causing the unit to malfunction? Would appreciate a quick response to get it up and running again.
—> Purchase or Repair:
—> Purchase or Repair:
The Ropex RES-440-L/400VAC 744013 is not functioning. Maintenance team is investigating.
—> Purchase or Repair:
—> Purchase or Repair:
The unit RES-440-L/400VAC 744013 is currently not working. It is identified as a Control Unit.
—> Purchase or Repair:
—> Purchase or Repair:
The Ropex RES-403/230VAC 740302 unit is not functioning. Please investigate the issue. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Ropex 0 740302 is a Temperature Controller that is currently not working. Maintenance team is trying to troubleshoot the issue.
—> Purchase or Repair:
—> Purchase or Repair:
Just found out that the Ropex RES-403/230VAC 740302 controller has failed. Need to get a replacement ASAP to keep things running smoothly. Will update once it's fixed.
—> Purchase or Repair:
—> Purchase or Repair:
I'm having trouble with the Ropex RES-440-L/400VAC 744013 control unit. It seems like something has stopped working. I'm not really sure what the issue is, but I wanted to reach out for help.
—> Purchase or Repair:
—> Purchase or Repair:
Request Service for RopexModel/Part : 744013 Res 440 L 400Vac Control Unit
The Ropex RES-440-L/400VAC 744013 Control Unit is still down. Need a response
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm reaching out on behalf of a client who needs assistance with a Ropex RES-440-L/400VAC 744013 Control Unit. They are experiencing some issues but we don't have the full details yet. Can you please provide information on how to diagnose and potentially repair this unit? Thank you. —> …Purchase or Repair: 
...
Show More
Show More
Ropex RES-403/230VAC 740302 controller is not responding to any input commands.
—> Purchase or Repair:
—> Purchase or Repair:
Request Service for RopexModel/Part : 744013 Res 440 L 400Vac Control Unit
I observed that one of the Ropex RES-440-L/400VAC 744013 control units in the warehouse is displaying unusual behavior. It is not functioning as it normally does and is acting erratically.
—> Purchase or Repair:
—> Purchase or Repair:
The Ropex RES-440-L/400VAC 744013 is a Control Unit that is currently not functioning properly.
—> Purchase or Repair:
—> Purchase or Repair:
The Ropex RES-403/230VAC 740302 controller is displaying error code E07, causing the equipment to malfunction. Please advise on troubleshooting steps or repair options. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, we have a client who is experiencing issues with the Ropex RES-403/230VAC 740302 controller. Can you please provide information on troubleshooting and repair options for this product? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Ropex RES-440-L/400VAC 744013 Control Unit is still down. Please prioritize fixing this issue and provide an update
—> Purchase or Repair:
—> Purchase or Repair:
One of the Ropex 0 740302 Temperature Controllers just died on us needs immediate attention. I'm heading over to the next machine now.
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing some issues with the Ropex 0 740302 machine. It's a Temperature Controller, but I'm unsure about its functionality. Something seems to have stopped working, and I would appreciate some assistance to troubleshoot and resolve the problem.
—> Purchase or Repair:
—> Purchase or Repair:
The Ropex RES-403/230VAC 740302 controller is displaying error code E-25 and showing a constant alarm for "overvoltage." The equipment is not responding or functioning properly. Please advise on troubleshooting steps or repair recommendations. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
One of the Ropex RES-440-L/400VAC 744013 units in the warehouse is displaying unusual behavior. It is not operating as it normally does.
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, could you please provide repair information for a Ropex RES-440-L/400VAC 744013 Control Unit? It's urgent, thank you!
—> Purchase or Repair:
—> Purchase or Repair:
There was a downtime incident with the Ropex RES-440-L/400VAC 744013 Control Unit. It occurred during our shift on . Need a quick update before next shift comes in.
—> Purchase or Repair:
—> Purchase or Repair:
I need urgent assistance with Ropex 0 740302, the Temperature Controller. The unit is still down. Please respond
—> Purchase or Repair:
—> Purchase or Repair:
Can you please confirm if the Ropex RES-440-L/400VAC 744013 Control Unit is still supported or if replacement parts are available for it? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
My Ropex RES-403/230VAC 740302 industrial unit stopped working suddenly. Need a specialist to repair the controller ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if the Ropex RES-440-L/400VAC 744013 Control Unit is still supported, and if replacement parts are available for it? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Ropex RES-403/230VAC 740302 controller is showing error code E102, indicating a communication failure with the main unit. Equipment is currently down, affecting production. Please advise on troubleshooting steps or repair options. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Just had a failure on the Ropex RES-440-L/400VAC 744013 Control Unit, likely a drive or board issue. Will troubleshoot and update as needed.
—> Purchase or Repair:
—> Purchase or Repair:
I'm having trouble with the Ropex res-407-0-3 machine. It seems like something has stopped working, but I'm not sure what exactly. I would appreciate any assistance you can provide. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
the Ropex 0 740302 Temperature Controller failed during the night shift. Please check it out first thing in the morning. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: