Ropex Service & Repair Forum

I'm having trouble with the Ropex RES-440-L/400VAC 744013. The control unit seems to have stopped working properly. I'm not sure what the issue is, but your help would be greatly appreciated.

—> Purchase or Repair: Ticket Image

— Posted by MitchelJege on 2014-03-13

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Ropex"

If you need your Ropex unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 106 Comments

#Ropex by Howard Robertson on 2014-07-29 07:24
The Ropex RES-440-L/400VAC 744013 Control Unit is still down. Please prioritize fixing this issue and provide an update

—> Purchase or Repair:
#Ropex by GRAPHIQUE on 2012-04-14 19:33
My Ropex RES-403/230VAC 740302 industrial unit stopped working suddenly. Need a specialist to repair the controller ASAP.

—> Purchase or Repair:
#Ropex by Dave Borgfield on 2014-01-07 05:22
The Ropex RES-440-L/400VAC 744013 unit is not functioning properly. Please take a look as soon as possible. Thank you.

—> Purchase or Repair:
#Ropex by wassim chaar on 2012-03-24 23:08
Just found out that the Ropex RES-403/230VAC 740302 controller has failed. Need to get a replacement ASAP to keep things running smoothly. Will update once it's fixed.

—> Purchase or Repair:
#Ropex by AGUSTI on 2012-10-28 22:03
the Ropex RES-403/230VAC 740302 controller unit went down mid-shift. Needs attention ASAP. Thanks.

—> Purchase or Repair:
#Ropex by renante on 2014-12-19 13:44
Looking for a technician to repair my non-functioning Ropex RES-440-L/400VAC 744013 Control Unit. It's not powering up despite proper connections. Need urgent assistance.

—> Purchase or Repair:
#Ropex by Melina Rojas Saloma on 2014-07-02 04:57
The Ropex RES-440-L/400VAC 744013 control unit went down mid-shift. Please follow up on this tomorrow.

—> Purchase or Repair:
#Ropex by alex zhusma on 2014-12-17 02:44
I'm having trouble with the Ropex RES-440-L/400VAC 744013 control unit. It seems like something has stopped working. I'm not really sure what the issue is, but I wanted to reach out for help.

—> Purchase or Repair:
#Ropex by William Bacon on 2014-10-27 06:18
Ropex RES-440-L/400VAC 744013 Control Unit not powering on.

—> Purchase or Repair:
#Ropex by Duryab Tahir on 2012-08-04 11:24
Hello, I am inquiring about Ropex 0 740302, which is a Temperature Controller. My client is experiencing some issues with it and needs assistance. Can you provide me with more information on possible repairs or replacements? Thank you.

—> Purchase or Repair:
#Ropex by Don Havener on 2012-01-28 15:12
I'm having trouble with the Ropex 0 740302, which I believe is a Temperature Controller. It seems that something has stopped working, and I'm unsure how to fix it. Any assistance or guidance would be greatly appreciated.

—> Purchase or Repair:
#Ropex by MUHAMMAD JAMIL AKHTER on 2012-09-19 21:15
I need urgent assistance with Ropex 0 740302, the Temperature Controller. The unit is still down. Please respond

—> Purchase or Repair:
#Ropex by Valadka on 2014-09-24 00:23
The Ropex RES-440-L/400VAC 744013 is a Control Unit that is currently not functioning properly.

—> Purchase or Repair:
#Ropex by john naud on 2014-12-26 08:06
I am experiencing an issue with the Ropex RES-440-L/400VAC 744013 Control Unit where something seems to have stopped working. I am uncertain about the exact nature of the problem, but could you please provide assistance with troubleshooting it? Thank you.

—> Purchase or Repair:
#Ropex by Tim Storms on 2012-10-26 19:35
I'm having trouble with the Ropex 0 740302. It's a temperature controller, but I'm not exactly sure how to describe the issue since something seems to have stopped working.

—> Purchase or Repair:
#Ropex by Risso on 2012-09-20 21:49
The Ropex RES-403/230VAC 740302 is displaying Error Code E101 indicating a potential communication issue. Please advise on troubleshooting steps to resolve. Thank you.

—> Purchase or Repair:
#Ropex by Rainbow on 2012-08-06 09:24
Could you please confirm whether the Ropex 0 740302 Temperature Controller is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:
#Ropex by Pascal Cesar on 2014-12-26 02:27
The unit RES-440-L/400VAC 744013 is currently not working. It is identified as a Control Unit.

—> Purchase or Repair:
#Ropex by Kaichen on 2012-06-11 09:05
The Ropex RES-403/230VAC 740302 unit is not functioning. Please investigate the issue. Thank you.

—> Purchase or Repair:
#Ropex by Rick Pero on 2012-05-26 18:04
The Ropex RES-403/230VAC 740302 controller is not powering on.

—> Purchase or Repair:
#Ropex by muhammad Nouman on 2014-11-21 10:12
Could you please confirm if the Ropex RES-440-L/400VAC 744013 Control Unit is still supported, and if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#Ropex by muhammad Nouman on 2014-12-21 12:44
The Ropex RES-440-L/400VAC 744013 is not functioning. Maintenance team is investigating.

—> Purchase or Repair:
#Ropex by tim stokolosa on 2014-05-02 22:20
Hello, I am interested in purchasing a Ropex RES-440-L/400VAC 744013 Control Unit. Could you please provide me with information regarding pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Ropex by Ing. Jose Calos Pinto on 2012-08-02 21:55
Hello, I'm interested in purchasing the Ropex RES-403/230VAC 740302 controller. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#Ropex by Faheem on 2012-07-31 14:37
Looking for a technician to repair my Ropex RES-403/230VAC 740302 controller unit. It's not functioning correctly and needs immediate attention. Please let me know if you can assist with fixing this industrial unit.

—> Purchase or Repair:
#Ropex by rick rodriguez on 2014-08-13 17:22
the Ropex RES-440-L/400VAC 744013 control unit went down during the shift. Needs attention ASAP. Thanks.

—> Purchase or Repair:
#Ropex by Korzhenevskii SerG on 2014-11-28 06:16
Just had a failure on the Ropex RES-440-L control unit at 744013, likely a drive or board issue. Will investigate further and report back.

—> Purchase or Repair:
#Ropex by bliss on 2012-01-17 12:45
The Ropex RES-403/230VAC 740302 controller is displaying error code E-25 and showing a constant alarm for "overvoltage." The equipment is not responding or functioning properly. Please advise on troubleshooting steps or repair recommendations. Thank you.

—> Purchase or Repair:
#Ropex by Don Pritchard on 2014-12-25 17:06
We experienced downtime due to a malfunction with the Ropex RES-440-L/400VAC 744013 Control Unit. The issue occurred during the previous shift. Can you provide some insights about what went wrong and any recommendations for troubleshooting before the next shift begins?

—> Purchase or Repair:
#Ropex by eugenio cortis on 2012-08-02 20:55
Can the Ropex RES-403/230VAC 740302 controller be repaired or should it be replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Ropex by Sidebottom on 2012-02-22 01:22
Hello, we still have an unresolved issue with our Ropex RES-403/230VAC 740302 controller. It's important that we receive a response

—> Purchase or Repair:
#Ropex by giron on 2012-10-28 16:03
I'm experiencing issues with the Ropex 0 740302, which I believe is a Temperature Controller. Something seems to have stopped working, and I'm unsure how to address it. Any assistance or guidance would be greatly appreciated.

—> Purchase or Repair:
#Ropex by Jinnings on 2012-04-23 22:21
Could you please confirm if the Ropex RES-403/230VAC 740302 Controller is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:
#Ropex by kevin whiteway on 2014-02-18 05:12
The Ropex RES-440-L/400VAC 744013 control unit went down mid-shift. Please check and repair first thing in the morning.

—> Purchase or Repair:
#Ropex by Jeffrey on 2012-03-25 01:08
The Ropex RES-403/230VAC 740302 controller unit is malfunctioning, causing a significant disruption to our production line. Immediate action is required to rectify this issue

—> Purchase or Repair:
#Ropex by Ronald Boylan on 2014-08-19 16:26
One of the drive units just failed in the Ropex RES-440-L/400VAC 744013 control unit. I'll need to troubleshoot and replace it ASAP.

—> Purchase or Repair:
#Ropex by Dustin Pham on 2014-12-23 17:06
The Ropex RES-440-L/400VAC 744013 control unit is displaying error code E5 and the alarm keeps going off intermittently causing the equipment downtime. Please advise on the troubleshooting steps urgently.

—> Purchase or Repair:
#Ropex by Fencer on 2012-06-15 08:28
Need someone to fix my Ropex RES-403/230VAC 740302, it's a controller. What's causing the unit to malfunction? Would appreciate a quick response to get it up and running again.

—> Purchase or Repair:
#Ropex by Kaschak on 2014-03-25 06:30
There was a downtime incident with the Ropex RES-440-L/400VAC 744013 Control Unit. It occurred during our shift on . Need a quick update before next shift comes in.

—> Purchase or Repair:
#Ropex by Kiphart on 2012-03-02 04:10
Ropex RES-403/230VAC 740302 controller failure. Need to replace drive or board ASAP.

—> Purchase or Repair:
#Ropex by Phillip E Mead on 2025-09-19 20:11
Request Service for RopexModel/Part : 744013 Res 440 L 400Vac Control Unit

—> Purchase or Repair:
#Ropex by abderrahim on 2014-05-01 19:20
I'm experiencing issues with the Ropex RES-440-L/400VAC 744013 Control Unit. It appears that something has stopped working, and I'm not entirely sure what the problem might be. Any assistance in diagnosing and resolving this would be greatly appreciated.

—> Purchase or Repair:
#Ropex by MitchelJege on 2014-03-13 16:02
I'm having trouble with the Ropex RES-440-L/400VAC 744013. The control unit seems to have stopped working properly. I'm not sure what the issue is, but your help would be greatly appreciated.

—> Purchase or Repair:
#Ropex by Brick Roberts on 2019-11-14 00:00
I'm having trouble with the Ropex res-407-0-3 machine. It seems like something has stopped working, but I'm not sure what exactly. I would appreciate any assistance you can provide. Thank you.

—> Purchase or Repair:
#Ropex by George Blackmon on 2012-11-25 21:04
The Ropex 0 740302 temperature controller experienced a malfunction that led to unexpected downtime. The issue occurred on , impacting our production output. Please advise on the best course of action to prevent this from happening again before the next shift begins. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#Ropex by Dantonio on 2012-02-09 22:35
Can you please confirm if the Ropex RES-403/230VAC 740302 controller is still supported? We are looking for replacement or repair options for this unit, but we are unsure about its manufacturer. Your assistance would be greatly appreciated. Thank you.

—> Purchase or Repair:
#Ropex by Jamesseirl on 2014-02-16 00:58
Hello, I am interested in purchasing the Ropex RES-440-L/400VAC 744013 Control Unit. Can you please provide me with information on pricing and availability? I am looking to source this unit quickly. Thank you.

—> Purchase or Repair:
#Ropex by Robert keith on 2012-02-14 21:09
The Ropex 0 740302 Temperature Controller is malfunctioning, affecting the productivity of the production line. Please provide urgent repair services to fix the issue

—> Purchase or Repair:
#Ropex by Deline on 2012-08-02 08:55
The Ropex RES-403/230VAC 740302 controller is not working as reported.

—> Purchase or Repair:
#Ropex by Otto Schmidt on 2012-01-31 02:03
The Ropex RES-403/230VAC 740302 controller is displaying error code E07, causing the equipment to malfunction. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.