Ropex Service & Repair Forum

One of the Ropex RES-440-L/400VAC 744013 units in the warehouse is exhibiting unusual behavior. It is not functioning as expected, but I am not able to provide a specific term for the malfunction.

—> Purchase or Repair: Ticket Image

— Posted by Juan C Perez on 2014-05-04

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Ropex"

If you need your Ropex unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 104 Comments

#Ropex by Owen Torgerson on 2012-06-03 15:04
The Ropex RES-403/230VAC 740302 controller is showing error code E005, indicating a communication fault with the sensor. Equipment unable to regulate temperature. Urgent repair needed to resume operations.

—> Purchase or Repair:
#Ropex by Risso on 2012-09-20 21:49
The Ropex RES-403/230VAC 740302 is displaying Error Code E101 indicating a potential communication issue. Please advise on troubleshooting steps to resolve. Thank you.

—> Purchase or Repair:
#Ropex by Nilo on 2014-12-05 17:23
The Ropex RES-440-L/400VAC 744013 Control Unit in the warehouse is exhibiting abnormal behavior - it is not functioning as it typically does.

—> Purchase or Repair:
#Ropex by MOHAMED DRICI on 2012-08-24 08:00
The Ropex 0 740302 Temperature Controller is not functioning properly.

—> Purchase or Repair:
#Ropex by Melina Rojas Saloma on 2014-07-02 04:57
The Ropex RES-440-L/400VAC 744013 control unit went down mid-shift. Please follow up on this tomorrow.

—> Purchase or Repair:
#Ropex by Otto Schmidt on 2012-01-31 02:03
The Ropex RES-403/230VAC 740302 controller is displaying error code E07, causing the equipment to malfunction. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Ropex by William Bacon on 2014-10-27 06:18
Ropex RES-440-L/400VAC 744013 Control Unit not powering on.

—> Purchase or Repair:
#Ropex by johnna villaceran on 2012-08-17 02:19
Hello, I am inquiring about a Ropex 0 740302, described as a Temperature Controller. Could you please provide me with more information and options for repair? Thank you.

—> Purchase or Repair:
#Ropex by Steve Grom on 2014-12-26 03:27
Just had a failure on the Ropex RES-440-L/400VAC 744013 Control Unit, likely a drive or board issue. Will troubleshoot and update as needed.

—> Purchase or Repair:
#Ropex by Kristie Thompson on 2014-12-24 04:06
Looking for repair for Ropex RES-440-L/400VAC 744013 Control Unit unit not powering up or responding to controls. Please contact if you can troubleshoot and repair

—> Purchase or Repair:
#Ropex by Ronald Boylan on 2014-08-19 16:26
One of the drive units just failed in the Ropex RES-440-L/400VAC 744013 control unit. I'll need to troubleshoot and replace it ASAP.

—> Purchase or Repair:
#Ropex by Tim Storms on 2012-10-26 19:35
I'm having trouble with the Ropex 0 740302. It's a temperature controller, but I'm not exactly sure how to describe the issue since something seems to have stopped working.

—> Purchase or Repair:
#Ropex by wbjs on 2012-12-02 10:13
The Ropex RES-403/230VAC 740302 controller is showing error code E102, indicating a communication failure with the main unit. Equipment is currently down, affecting production. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Ropex by Brick Roberts on 2019-11-14 00:00
I'm having trouble with the Ropex res-407-0-3 machine. It seems like something has stopped working, but I'm not sure what exactly. I would appreciate any assistance you can provide. Thank you.

—> Purchase or Repair:
#Ropex by AARON RYE on 2012-06-02 00:47
Hello, do you have a Ropex 0 740302 Temperature Controller available for purchase to keep our production running? Thank you.

—> Purchase or Repair:
#Ropex by regis on 2014-05-05 11:20
One of the Ropex RES-440-L/400VAC 744013 units in the warehouse is displaying unusual behavior. It is not operating as it normally does.

—> Purchase or Repair:
#Ropex by Lee Chestnut on 2014-05-06 08:20
Hello, I'm interested in purchasing the Ropex RES-440-L/400VAC 744013 Control Unit. I just want to confirm the pricing and availability for this model as I'm looking to source one quickly. Thank you!

—> Purchase or Repair:
#Ropex by kevin whiteway on 2014-02-18 05:12
The Ropex RES-440-L/400VAC 744013 control unit went down mid-shift. Please check and repair first thing in the morning.

—> Purchase or Repair:
#Ropex by LaCruze on 2012-02-24 00:21
The Ropex 0 740302 temperature controller is displaying Error Code E21, indicating a malfunction with the temperature sensor. Equipment is not regulating temperature properly, causing inconsistencies in production. Please advise on troubleshooting steps or schedule a technician visit for repair. —> …Purchase or Repair: Ticket Image...
Show More
#Ropex by George Blackmon on 2012-11-25 21:04
The Ropex 0 740302 temperature controller experienced a malfunction that led to unexpected downtime. The issue occurred on , impacting our production output. Please advise on the best course of action to prevent this from happening again before the next shift begins. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#Ropex by roland MIRANDA on 2012-09-13 09:08
My Ropex 0 740302, which I believe is a Temperature Controller, is experiencing some issues. Something seems to have stopped working, and I'm unsure how to troubleshoot it. Any guidance or support would be greatly appreciated.

—> Purchase or Repair:
#Ropex by rick rodriguez on 2014-08-13 17:22
the Ropex RES-440-L/400VAC 744013 control unit went down during the shift. Needs attention ASAP. Thanks.

—> Purchase or Repair:
#Ropex by Ajardy Dias Alves on 2012-05-26 22:04
The Ropex 0 740302, which is a Temperature Controller unit, malfunctioned earlier today causing unexpected downtime. It happened during the night shift between 200 AM and 300 AM. Please provide guidance on what actions need to be taken to prevent this from reoccurring. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#Ropex by selastin on 2012-01-18 11:39
Hello, the Ropex RES-403/230VAC 740302, which is the controller unit, malfunctioned today and caused downtime around 230 PM. Please provide a quick update before the next shift arrives. Thank you.

—> Purchase or Repair:
#Ropex by Korzhenevskii SerG on 2014-11-28 06:16
Just had a failure on the Ropex RES-440-L control unit at 744013, likely a drive or board issue. Will investigate further and report back.

—> Purchase or Repair:
#Ropex by Deline on 2012-08-02 08:55
The Ropex RES-403/230VAC 740302 controller is not working as reported.

—> Purchase or Repair:
#Ropex by Jinnings on 2012-04-23 22:21
Could you please confirm if the Ropex RES-403/230VAC 740302 Controller is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:
#Ropex by Faheem on 2012-07-31 14:37
Looking for a technician to repair my Ropex RES-403/230VAC 740302 controller unit. It's not functioning correctly and needs immediate attention. Please let me know if you can assist with fixing this industrial unit.

—> Purchase or Repair:
#Ropex by muhammad Nouman on 2014-12-21 12:44
The Ropex RES-440-L/400VAC 744013 is not functioning. Maintenance team is investigating.

—> Purchase or Repair:
#Ropex by Dustin Chase on 2012-09-03 15:46
One of the Ropex 0 740302 Temperature Controllers just died on us needs immediate attention. I'm heading over to the next machine now.

—> Purchase or Repair:
#Ropex by Rick Pero on 2012-05-26 18:04
The Ropex RES-403/230VAC 740302 controller is not powering on.

—> Purchase or Repair:
#Ropex by EZALDEIN on 2014-11-21 14:12
Hello, I'm interested in the Ropex RES-440-L/400VAC 744013 Control Unit for purchase. Can you please provide me with information on pricing and availability? I'm looking to source this quickly. Thank you.

—> Purchase or Repair:
#Ropex by Sidebottom on 2012-02-22 01:22
Hello, we still have an unresolved issue with our Ropex RES-403/230VAC 740302 controller. It's important that we receive a response

—> Purchase or Repair:
#Ropex by giron on 2012-10-28 16:03
I'm experiencing issues with the Ropex 0 740302, which I believe is a Temperature Controller. Something seems to have stopped working, and I'm unsure how to address it. Any assistance or guidance would be greatly appreciated.

—> Purchase or Repair:
#Ropex by Rafael Wischkin on 2014-02-12 05:58
Could you please advise if the Ropex RES-440-L/400VAC 744013 Control Unit is still supported or if replacement parts are available for it? We have an older unit but are unsure of the manufacturer.

—> Purchase or Repair:
#Ropex by john naud on 2014-12-26 08:06
I am experiencing an issue with the Ropex RES-440-L/400VAC 744013 Control Unit where something seems to have stopped working. I am uncertain about the exact nature of the problem, but could you please provide assistance with troubleshooting it? Thank you.

—> Purchase or Repair:
#Ropex by Juan C Perez on 2014-05-04 00:20
One of the Ropex RES-440-L/400VAC 744013 units in the warehouse is exhibiting unusual behavior. It is not functioning as expected, but I am not able to provide a specific term for the malfunction.

—> Purchase or Repair:
#Ropex by Valadka on 2014-09-24 00:23
The Ropex RES-440-L/400VAC 744013 is a Control Unit that is currently not functioning properly.

—> Purchase or Repair:
#Ropex by MitchelJege on 2014-03-13 16:02
I'm having trouble with the Ropex RES-440-L/400VAC 744013. The control unit seems to have stopped working properly. I'm not sure what the issue is, but your help would be greatly appreciated.

—> Purchase or Repair:
#Ropex by Don Pritchard on 2014-12-25 17:06
We experienced downtime due to a malfunction with the Ropex RES-440-L/400VAC 744013 Control Unit. The issue occurred during the previous shift. Can you provide some insights about what went wrong and any recommendations for troubleshooting before the next shift begins?

—> Purchase or Repair:
#Ropex by Ben Cooper on 2012-04-21 03:09
I'm experiencing some issues with the Ropex 0 740302 machine. It's a Temperature Controller, but I'm unsure about its functionality. Something seems to have stopped working, and I would appreciate some assistance to troubleshoot and resolve the problem.

—> Purchase or Repair:
#Ropex by Kft. on 2012-07-27 15:19
Ropex 0740302 displaying error code E4, generating high temp alarm. Equipment down, urgent assistance needed.

—> Purchase or Repair:
#Ropex by Robert keith on 2012-02-14 21:09
The Ropex 0 740302 Temperature Controller is malfunctioning, affecting the productivity of the production line. Please provide urgent repair services to fix the issue

—> Purchase or Repair:
#Ropex by bliss on 2012-01-17 12:45
The Ropex RES-403/230VAC 740302 controller is displaying error code E-25 and showing a constant alarm for "overvoltage." The equipment is not responding or functioning properly. Please advise on troubleshooting steps or repair recommendations. Thank you.

—> Purchase or Repair:
#Ropex by alex zhusma on 2014-12-17 02:44
I'm having trouble with the Ropex RES-440-L/400VAC 744013 control unit. It seems like something has stopped working. I'm not really sure what the issue is, but I wanted to reach out for help.

—> Purchase or Repair:
#Ropex by Jarkko on 2012-02-09 14:35
The Ropex RES-403/230VAC 740302 controller on Unit X went down during the night shift. Need to investigate and repair ASAP. Can you take care of it during the day shift? Thanks.

—> Purchase or Repair:
#Ropex by R. R. SARAF on 2012-01-17 04:16
Ropex RES-403/230VAC 740302 controller not responding to input commands, halting production.

—> Purchase or Repair:
#Ropex by Peek on 2012-04-20 12:05
Do you have a Ropex 0 740302 Temperature Controller available for sale or repair? It's urgent for production continuity. Thank you.

—> Purchase or Repair:
#Ropex by tim stokolosa on 2014-05-02 22:20
Hello, I am interested in purchasing a Ropex RES-440-L/400VAC 744013 Control Unit. Could you please provide me with information regarding pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Ropex by Kiphart on 2012-03-02 04:10
Ropex RES-403/230VAC 740302 controller failure. Need to replace drive or board ASAP.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.